12-05-2004, 08:35 PM | #1 |
Shaved
Join Date: Nov 2004
Location: Vernon, Tx
Posts: 115
|
front bag question
Is it the same proceedure baggin the front on a 69 GMC as it would be a 69 Chevy. I mean, do the suicidedoors plates bolt right up the same way? Also, what do you all reccomend on the rear? thanks, Jody
__________________
1969 |
12-05-2004, 08:39 PM | #2 |
its just $$$$$
Join Date: Jul 2003
Location: OK
Posts: 2,078
|
yes, should be exactly the same.
|
12-05-2004, 08:40 PM | #3 |
Shaved
Join Date: Nov 2004
Location: Vernon, Tx
Posts: 115
|
Ok, thanks for the quick reply, now all I have to do is save up lol
__________________
1969 |
12-08-2004, 12:17 AM | #4 |
17's too small
Join Date: Oct 2004
Location: Las Vegas, NV
Posts: 335
|
those plates are cheap, but two sets so you are ready to go on your next project. LOL
__________________
68 C10 SWB SS 5 lug power disc brake conversion 2.5 inch drop spindles van tilt column Air Ride Technologies Cool Ride air bag kits Performance Online tubular upper control arms and shock relocator kits ECE super track panhard bar 1 piece side windows |
12-08-2004, 12:30 AM | #5 |
Head Peon
Join Date: Dec 1999
Location: Imlay City MI
Posts: 295
|
Check out this thread for a simple answer for the rear:
http://67-72chevytrucks.com/vboard/s....php3?t=129463
__________________
'72 Suburban, factory tilt, tach, front & rear AC, front & rear disc brakes, 383/700-R4 |
12-08-2004, 11:45 PM | #6 |
Shaved
Join Date: Nov 2004
Location: Vernon, Tx
Posts: 115
|
thanks
__________________
1969 |
12-09-2004, 10:47 PM | #7 |
GM ONLY BABY!!!
Join Date: Oct 2003
Location: Fort Wayne, IN.
Posts: 1,998
|
What about us leaf spring guys? How much drop will we get from the "air over leaf" kit?
__________________
2 wrongs don't make a right, but 3 lefts do. 66 Chevelle Malibu 406ci, 573hp, 10.99@121mph 96 Chevy Silverado Z71 72 GMC 1500 Super Custom LS 6.0/4L65 on airride http://www.cardomain.com/ride/707879...mc-c-k-pick-up |
12-09-2004, 11:08 PM | #8 |
Head Peon
Join Date: Dec 1999
Location: Imlay City MI
Posts: 295
|
I guess the answer would be as much as you dearch the springs...air over leaf is meant more to be used as an "overload" spring than to drop your ride. Don't get me wrong, guys run it to get low, but have to dearch your springs and pretty much only run the main spring. You take the chance of the spring breaking, which gets ugly quick. I apologize for the poor explanation (brain isn't working well right now...LOL) hopefully somebody else can translate my blah blah. You could always switch over to trailing arm...ECE crossmember plus a set of trailing arms and axle mounts and you'd be there...then running a regular bag setup would be a cinch...pretty much bolt on except for the axle mounts...
__________________
'72 Suburban, factory tilt, tach, front & rear AC, front & rear disc brakes, 383/700-R4 Last edited by Shev; 12-09-2004 at 11:10 PM. |
12-09-2004, 11:25 PM | #9 |
GM ONLY BABY!!!
Join Date: Oct 2003
Location: Fort Wayne, IN.
Posts: 1,998
|
Here's some info, but I am curious as to how much drop is obtained from this.
http://www.airride.com/productinfo/airoverleaf.asp
__________________
2 wrongs don't make a right, but 3 lefts do. 66 Chevelle Malibu 406ci, 573hp, 10.99@121mph 96 Chevy Silverado Z71 72 GMC 1500 Super Custom LS 6.0/4L65 on airride http://www.cardomain.com/ride/707879...mc-c-k-pick-up |
12-09-2004, 11:45 PM | #10 |
Head Peon
Join Date: Dec 1999
Location: Imlay City MI
Posts: 295
|
I guess my next answer would be to either email or call AirRide and see what they have to say...most guys that try going the air over leaf way end up going with some sort of link setup in the end. Air over leaf is great for additional payload...
__________________
'72 Suburban, factory tilt, tach, front & rear AC, front & rear disc brakes, 383/700-R4 |
12-10-2004, 12:12 AM | #11 | |
Happy to be here
Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,021
|
Quote:
__________________
Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" |
|
12-10-2004, 12:12 AM | #12 |
Happy to be here
Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,021
|
2.........
|
Bookmarks |
|
|