Odometer question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

East End K5 · 01-04-2005, 08:26 PM

How do I roll back my odometer. I have the gauge cluster apart and the speed/odometer in my hand. I am looking at it, and it looks like the only thing I am manually able to roll is the tenths line. Anybody have an idea?

LUV2XCLR8 · 01-04-2005, 08:48 PM

Quote:

Originally Posted by East End K5

How do I roll back my odometer. I have the gauge cluster apart and the speed/odometer in my hand. I am looking at it, and it looks like the only thing I am manually able to roll is the tenths line. Anybody have an idea?

WELL I ALWAYS THOUGHT IT WAS ILLEGAL, HOWEVER I HAVE HEARD OF
USEING A CORDLESS DRILL ON THE SPEEDO CABLE ATTACHMENT, I THINK

East End K5 · 01-04-2005, 08:50 PM

LOL. I think it's illegal for new cars, but our old ones I don't know. Being that I hae the guage cluster apart, I want to roll it back just to see how many miles I can get out of this engine since I now own it.

JayDubBlazer · 01-04-2005, 08:57 PM

Watch the movie "Ferris Buller's Day Off"

LUV2XCLR8 · 01-04-2005, 09:15 PM

Quote:

Originally Posted by JayDubBlazer

Watch the movie "Ferris Buller's Day Off"

LMAO AND ROTF

East End K5 · 01-04-2005, 09:28 PM

you guys are too much. I'm not gonna bother, I'll end up breaking the damn thing.

LUV2XCLR8 · 01-04-2005, 09:43 PM

Quote:

Originally Posted by East End K5

you guys are too much. I'm not gonna bother, I'll end up breaking the damn thing.

THE CORDLESS / STANDARD DRILL THING WORKS, JUST TAKES A LONG TIME,
YOU WILL BASICALLY HAVE TO GO FORWARD AND ROLL IT OVER 99999.

c-1072 · 01-04-2005, 10:44 PM

NOT that i have done this but you need to split the bracket that holds the number wheels slide them apart and realighn them to the number you want zero is real easy the only trik is to make sure the numbers are in proper allighnment to eachother .

vtblazer · 01-05-2005, 08:01 AM

Quote:

Originally Posted by c-1072

NOT that i have done this but you need to split the bracket that holds the number wheels slide them apart and realighn them to the number you want zero is real easy the only trik is to make sure the numbers are in proper allighnment to eachother .

Right, me either.

be sure not to break the plastic retainer when you disassemble it.

Don't leave any finger prints...

smokekiki · 01-05-2005, 10:36 AM

Here in Pa,once a vehicle is as old as our trucks they automaticaly state that the odometer is not correct on the title.

sb400 · 01-05-2005, 01:19 PM

Be real careful with the speedometer needle. At least on the 73-up trucks they are designed to break off if tampered with.

01-04-2005, 08:26 PM	#1
East End K5 Registered User Join Date: Nov 2004 Location: Long Island NY Posts: 293	Odometer question How do I roll back my odometer. I have the gauge cluster apart and the speed/odometer in my hand. I am looking at it, and it looks like the only thing I am manually able to roll is the tenths line. Anybody have an idea? __________________ I feel sorry for people who don't drink....because when they wake up in the morning, that's the best they're gonna feel all day long!---Frank Sinatra RIP [B]1972 Chevrolet K5 Blazer RIP 1986 GMC Sierra K3500 1TON, Long Box, V8350 RIP 1980 Chevy Silverado C30 Cab and Chassis, 454 TH400HD. RIP [B] 1995 Chevrolet Tahoe 2D [B]

01-04-2005, 08:50 PM	#3
East End K5 Registered User Join Date: Nov 2004 Location: Long Island NY Posts: 293	LOL. I think it's illegal for new cars, but our old ones I don't know. Being that I hae the guage cluster apart, I want to roll it back just to see how many miles I can get out of this engine since I now own it. __________________ I feel sorry for people who don't drink....because when they wake up in the morning, that's the best they're gonna feel all day long!---Frank Sinatra RIP [B]1972 Chevrolet K5 Blazer RIP 1986 GMC Sierra K3500 1TON, Long Box, V8350 RIP 1980 Chevy Silverado C30 Cab and Chassis, 454 TH400HD. RIP [B] 1995 Chevrolet Tahoe 2D [B]

01-04-2005, 08:57 PM	#4
JayDubBlazer go cyclones Join Date: Jun 2003 Location: Ames, IA Posts: 1,883	Watch the movie "Ferris Buller's Day Off" __________________ Wes PROJECT OLE GREEN 1972 Blazer 4X4 350/700R4 2017 Silverado LT

01-04-2005, 09:28 PM	#6
East End K5 Registered User Join Date: Nov 2004 Location: Long Island NY Posts: 293	you guys are too much. I'm not gonna bother, I'll end up breaking the damn thing. __________________ I feel sorry for people who don't drink....because when they wake up in the morning, that's the best they're gonna feel all day long!---Frank Sinatra RIP [B]1972 Chevrolet K5 Blazer RIP 1986 GMC Sierra K3500 1TON, Long Box, V8350 RIP 1980 Chevy Silverado C30 Cab and Chassis, 454 TH400HD. RIP [B] 1995 Chevrolet Tahoe 2D [B]

01-04-2005, 10:44 PM	#8
c-1072 Registered User Join Date: Sep 2004 Location: rochester NY Posts: 777	roll back NOT that i have done this but you need to split the bracket that holds the number wheels slide them apart and realighn them to the number you want zero is real easy the only trik is to make sure the numbers are in proper allighnment to eachother .

01-05-2005, 10:36 AM	#10
smokekiki Mike Join Date: Jan 2003 Location: west chester pa Posts: 2,473	Here in Pa,once a vehicle is as old as our trucks they automaticaly state that the odometer is not correct on the title. __________________ 70'c/10, 71 suburban4x4 402bb, 72suburban 4/6 drop, 72k/5 4x4 blazer 4" lift 35 tires

01-05-2005, 01:19 PM	#11
sb400 Registered User Join Date: Nov 2003 Location: Superior CO Posts: 32	Be real careful with the speedometer needle. At least on the 73-up trucks they are designed to break off if tampered with. __________________ '79 SWB 4x4 Scottsdale 350/4 speed '70 Nova 406/M20 4 speed '02 Subaru WRX wagon



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.