Do they reproduce this peice? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Alexis · 01-30-2005, 09:22 PM

I thought I'd ask before playing wheres waldo on vendors websites. This piece bolts to the rocker box on the side facing the fender.Any ideas.

**lolife99** · 01-30-2005, 09:37 PM

I think GMCPaul's has them. Not for sure.

*Gee_Emm* · 01-30-2005, 11:30 PM

Nope, no repros currently produced. It took me quite a while to find one and man was I ever happy when I did.

*Gee_Emm* · 01-30-2005, 11:44 PM

Here is a pic you can use in a WTB post,it is a drivers side but it will help show people where this stupid part is located.

Alexis · 01-31-2005, 12:07 AM

thank GeeEmm, if nothing turns up tomorrow on the phone I'll make a post.

Huck · 01-31-2005, 09:28 AM

This was covered once before and no, that piece is not currently in reproduction. Looks like a great candidate though. Perhaps if one could find a decent pair, it could be done through one of the larger venders. Doesn't look like rocket science, just a few uncommon angles and some holes. And, it is a common rustout part of the Blazer/Jimmy's. Does the rocker box have to come out to remove that piece??

**raggedjim** · 01-31-2005, 10:01 AM

Nope, I pulled it out with the rocker box still in place. Mine looks exactly like Alexis.

Rg

*Gee_Emm* · 01-31-2005, 10:11 AM

http://67-72chevytrucks.com/vboard/s...ghlight=rocker

jhow66 · 01-31-2005, 01:41 PM

We made a couple for Orangeuavol's Blazer-not that hard.

FRENCHBLUE72 · 02-02-2005, 10:29 PM

Alex with the metal skills' you are learning you should be able to fab up that piece pretty easy..

Alexis · 02-02-2005, 11:22 PM

time vs. everything else. if i get those pieces for reasonable price, which I got to call back to check on that. I'll buy them but if not then I'll fab it up.

**GMCPaul** · 02-02-2005, 11:44 PM

We are actually looking for 1 of these so that we can send it off to be reproduced, so if anyone happens upon a drivers or passengers side rocker box forward outer block off plate thats in good condition that they do not need please let us know and we will buy it and get these made.
You can reach me at
robbinspd1199@yahoo.com
or M-F 9am-5pm EST 765-344-2906
Thanks for your help!!!
GMCPaul

**raggedjim** · 03-21-2005, 12:20 PM

I know this is old but I gave some bad info I need to correct. I did take mine out with the rocker box still in place, but only because the whole bottom of it was rusted away.

After taking a closer look at the Blazer I realized that if the piece is good it is welded between the rocker box and the rocker panel.

Sorry if I misled anyone on this.

Rg

*Gee_Emm* · 03-21-2005, 07:40 PM

Yup, you can kinda see 3 little tacks at the bottom of the piece in the picture I posted.

01-30-2005, 09:22 PM	#1
Alexis Member since 2000 Join Date: Dec 2000 Location: Mountain View Ca / Mexico Posts: 7,874	Do they reproduce this piece? I thought I'd ask before playing wheres waldo on vendors websites. This piece bolts to the rocker box on the side facing the fender.Any ideas. Attached Images Last edited by Alexis; 01-30-2005 at 09:30 PM.

01-30-2005, 09:37 PM	#2
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	I think GMCPaul's has them. Not for sure. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

01-30-2005, 11:30 PM	#3
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991	Nope, no repros currently produced. It took me quite a while to find one and man was I ever happy when I did. Last edited by Gee_Emm; 01-30-2005 at 11:48 PM.

01-30-2005, 11:44 PM	#4
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991	Here is a pic you can use in a WTB post,it is a drivers side but it will help show people where this stupid part is located. Last edited by Gee_Emm; 01-30-2005 at 11:49 PM.

01-31-2005, 10:01 AM	#7
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,485	Nope, I pulled it out with the rocker box still in place. Mine looks exactly like Alexis. Rg __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203 Ideas - https://67-72chevytrucks.com/vboard/...d.php?t=851743

01-31-2005, 12:07 AM	#5
Alexis Member since 2000 Join Date: Dec 2000 Location: Mountain View Ca / Mexico Posts: 7,874	thank GeeEmm, if nothing turns up tomorrow on the phone I'll make a post.

01-31-2005, 09:28 AM	#6
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,261	This was covered once before and no, that piece is not currently in reproduction. Looks like a great candidate though. Perhaps if one could find a decent pair, it could be done through one of the larger venders. Doesn't look like rocket science, just a few uncommon angles and some holes. And, it is a common rustout part of the Blazer/Jimmy's. Does the rocker box have to come out to remove that piece??

01-31-2005, 10:11 AM	#8
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991	http://67-72chevytrucks.com/vboard/s...ghlight=rocker

01-31-2005, 01:41 PM	#9
jhow66 Registered User Join Date: Jun 2002 Location: Knoxville Tenn. Posts: 3,058	We made a couple for Orangeuavol's Blazer-not that hard. __________________ 56 Chevy Bel-Air 2dr. HT (purchased new) 71 Chevy Cheyenne SWB PU (502HO) 65 GMC short bed step--work in progress and my gofer

02-02-2005, 10:29 PM	#10
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Alex with the metal skills' you are learning you should be able to fab up that piece pretty easy.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

02-02-2005, 11:22 PM	#11
Alexis Member since 2000 Join Date: Dec 2000 Location: Mountain View Ca / Mexico Posts: 7,874	time vs. everything else. if i get those pieces for reasonable price, which I got to call back to check on that. I'll buy them but if not then I'll fab it up.

02-02-2005, 11:44 PM	#12
GMCPaul Senior Member Join Date: Mar 2000 Location: Rockville,In. USA Posts: 3,721	We are actually looking for 1 of these so that we can send it off to be reproduced, so if anyone happens upon a drivers or passengers side rocker box forward outer block off plate thats in good condition that they do not need please let us know and we will buy it and get these made. You can reach me at robbinspd1199@yahoo.com or M-F 9am-5pm EST 765-344-2906 Thanks for your help!!! GMCPaul __________________ Secure Online Catalog for-GMCPauls Truck Parts Email- GMCPAULS@GMAIL.COM

03-21-2005, 12:20 PM	#13
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,485	I know this is old but I gave some bad info I need to correct. I did take mine out with the rocker box still in place, but only because the whole bottom of it was rusted away. After taking a closer look at the Blazer I realized that if the piece is good it is welded between the rocker box and the rocker panel. Sorry if I misled anyone on this. Rg __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203 Ideas - https://67-72chevytrucks.com/vboard/...d.php?t=851743

03-21-2005, 07:40 PM	#14
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991	Yup, you can kinda see 3 little tacks at the bottom of the piece in the picture I posted.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.