new LWB driveshaft for 700R4 trucks for sale...made for my '77 C20 700R swap - The 1947 - Present Chevrolet & GMC Truck Message Board Network

superchevy · 02-14-2005, 11:10 PM

I had this driveshaft made for the T400 to 700r4 swap I did on my '77 C20.
All the u-joints were replaced, as well as the carrier barrier. The shaft was shortened to fit the longer 700R4. Had a 700R4 slip yoke installed as well. Everything was precision balanced. Has about 100 miles on it. Cost me $295 for all the work.
If you're doing this swap or have a later model lwb with a 700R, you can save yourself some time and money by purchasing this new unit.
$145 and could probably ship it in a big piece of PVC pipe if needed.

JonnyTechMech · 02-28-2005, 02:09 PM

Hey Superchevy,

Do you still have that driveshaft available? I’m planning on doing this very swap fairly soon. Just thought I’d check in with you. Are you in North or South Austin cause it’s my home town.

JonnyTM

02-14-2005, 11:10 PM	#1
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	new LWB driveshaft for 700R4 trucks for sale...made for my '77 C20 700R swap I had this driveshaft made for the T400 to 700r4 swap I did on my '77 C20. All the u-joints were replaced, as well as the carrier barrier. The shaft was shortened to fit the longer 700R4. Had a 700R4 slip yoke installed as well. Everything was precision balanced. Has about 100 miles on it. Cost me $295 for all the work. If you're doing this swap or have a later model lwb with a 700R, you can save yourself some time and money by purchasing this new unit. $145 and could probably ship it in a big piece of PVC pipe if needed. __________________ '68 CST SWB factory 396/T400 buddy buckets, a/c, ps, pb '72 Corvette convertible 454/4spd/ac, ps, pb '73 GMC Sierra Grande short wide 454/T400 ps, pb, ac '77 K5 Blazer black on red, 350/T350/NP205 ps, pb, ac all original '78 GMC Sierra Classic short wide 454/T400 ps, pb, ac '72 GMC Sprint SP454. 1 of 38 built. '73 GMC Sprint SP454. 1 of 71 built. '75 GMC Sprint SP454. 1 of 25 built. SOLD! '72 GMC K25 4x4 468/4L80e/NP205 build thread http://67-72chevytrucks.com/vboard/s...23#post4324423 SOLD!'55 Chevy gasser 496/4spd build thread http://67-72chevytrucks.com/vboard/s...96#post4324396

02-28-2005, 02:09 PM	#2
JonnyTechMech STOP! Hamma time!!! Join Date: Feb 2005 Location: Dallas TX. Posts: 145	Hey Superchevy, Do you still have that driveshaft available? I’m planning on doing this very swap fairly soon. Just thought I’d check in with you. Are you in North or South Austin cause it’s my home town. JonnyTM



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.