LT1 engine complete running from 95-96 Impala SS - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

impsalt · 02-27-2005, 08:03 PM

i sent a pm this morning wanting to buy this motor if we could do the deal for 450 i think if you sell the injection parts to the fellow who wants them for lets say 100 or so and sell the the rest for 200 then we can make this work easy thanks

Russell · 02-27-2005, 08:10 PM

I'd be willing to pay 100 for the intake, fuel rails and injectors (not required, but if you have the fuel lines, they'd be a big plus

)

phantom dually · 02-27-2005, 08:49 PM

I am not looking to part out. Will sell as a whole only. Whoever buys can bother with the parting process. Ive had enough parting things out lately. Pics will be up in a minute.

phantom dually · 02-27-2005, 09:15 PM

here are a few pics. I realized that the motor does not have castings on the rear like older blocks. Is there another spot to look?? Motor has been stored in a heatded garage for 2 yrs or so. Its a bit dusty/dirty. I would personally rebuild it first but thats up to you. Also comes with some manifolds. Notice the holders on top for the plastic covers that came on the Impala SS. Says 95 or 96 he thought. Was pulled from wrecked car.

phantom dually · 02-27-2005, 09:35 PM

Quote:

Originally Posted by 1FaastC10

awaiting pics... once casting numbers and everything are posted, if everything is kosher, i'll take it. just a matter of finding the time to come get it.

If you get me the $$ Ill store it for a month or so.

phantom dually · 02-27-2005, 09:39 PM

If you want shipping quotes PM me with address to business w/ dock.

phantom dually · 02-28-2005, 08:05 PM

Lt1 has been sold locally thanks

02-27-2005, 08:10 PM	#27
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	I'd be willing to pay 100 for the intake, fuel rails and injectors (not required, but if you have the fuel lines, they'd be a big plus ) __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

02-27-2005, 08:49 PM	#28
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	I am not looking to part out. Will sell as a whole only. Whoever buys can bother with the parting process. Ive had enough parting things out lately. Pics will be up in a minute. __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

02-27-2005, 09:15 PM	#29
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	engine pics here are a few pics. I realized that the motor does not have castings on the rear like older blocks. Is there another spot to look?? Motor has been stored in a heatded garage for 2 yrs or so. Its a bit dusty/dirty. I would personally rebuild it first but thats up to you. Also comes with some manifolds. Notice the holders on top for the plastic covers that came on the Impala SS. Says 95 or 96 he thought. Was pulled from wrecked car. Attached Images __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

02-27-2005, 09:39 PM	#31
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	If you want shipping quotes PM me with address to business w/ dock. __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

02-28-2005, 08:05 PM	#32
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Lt1 has been sold locally thanks __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

02-27-2005, 08:03 PM	#26
impsalt Registered User Join Date: Feb 2005 Posts: 1	i sent a pm this morning wanting to buy this motor if we could do the deal for 450 i think if you sell the injection parts to the fellow who wants them for lets say 100 or so and sell the the rest for 200 then we can make this work easy thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.