Its getting closer! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

r0lf- · 03-01-2005, 10:40 PM

Im gonna pull a ocbaud and tim and post a new thread for every little thing. Once I get the compressor situation worked out, the bags go in. I filled the sucker from the schraeder I have on there for emergencies and checked the solenoids. Damn that crap is loud at only 50PSI.

phantom dually · 03-01-2005, 10:50 PM

Yeah But Tim Got His Post Count Yanked!!

*1FaastC10* · 03-01-2005, 10:51 PM

huh? what happened there?

ocbaud · 03-01-2005, 10:57 PM

STFU!!!!!!

anyways, i dont get to work on my truck much anymore cause i'm busy with school, and i dont have tools

PRUNEDA · 03-01-2005, 11:03 PM

Cool, what brand are the valves/size?

TIMSPEED · 03-01-2005, 11:51 PM

Quote:

Originally Posted by phantom dually

Yeah But Tim Got His Post Count Yanked!!

Ohh Well.."you are not your post count!"

r0lf- · 03-02-2005, 12:17 AM

SMC 3/8 Solenoids and 1/2" line. I was considering running line and mounting the solenoids between the cab and bed, but this way I needed less fittings and less places to leak. Its not That purdy, but it works.

Actually, after reconisderation, for security purposes, im going to have to move the valve placement. Prolly by each tire tucked in the frame. Its gonna be a pita to get to em, but I dont know of any other spots. Any takers on some good accessable spots? My tank is going right behind the driver in the back of the bed. So running in-line with a line to each bag, what is a good spot?

03-01-2005, 10:40 PM	#1
r0lf- Hotwheels? Join Date: Dec 2002 Location: Pleasant Hill, CA Posts: 1,145	Its getting closer! Im gonna pull a ocbaud and tim and post a new thread for every little thing. Once I get the compressor situation worked out, the bags go in. I filled the sucker from the schraeder I have on there for emergencies and checked the solenoids. Damn that crap is loud at only 50PSI. Attached Images __________________ 1978 Money Pit - CUSTOM DELUXE!!!!

03-01-2005, 10:50 PM	#2
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Yeah But Tim Got His Post Count Yanked!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

03-02-2005, 12:17 AM	#7
r0lf- Hotwheels? Join Date: Dec 2002 Location: Pleasant Hill, CA Posts: 1,145	SMC 3/8 Solenoids and 1/2" line. I was considering running line and mounting the solenoids between the cab and bed, but this way I needed less fittings and less places to leak. Its not That purdy, but it works. Actually, after reconisderation, for security purposes, im going to have to move the valve placement. Prolly by each tire tucked in the frame. Its gonna be a pita to get to em, but I dont know of any other spots. Any takers on some good accessable spots? My tank is going right behind the driver in the back of the bed. So running in-line with a line to each bag, what is a good spot? __________________ 1978 Money Pit - CUSTOM DELUXE!!!! Last edited by r0lf-; 03-02-2005 at 01:48 AM.

03-01-2005, 10:51 PM	#3
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	huh? what happened there?

03-01-2005, 10:57 PM	#4
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	STFU!!!!!! anyways, i dont get to work on my truck much anymore cause i'm busy with school, and i dont have tools

03-01-2005, 11:03 PM	#5
PRUNEDA '87 Join Date: Jun 2004 Location: Katy, TX Posts: 632	Cool, what brand are the valves/size?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.