88+ suspension on 82 ..... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Prerunner1982 · 03-07-2005, 04:02 PM

ok... i read the thread on putting 88+ spindles and brakes on a pre 72... amazed it worked like it did...

i dont need the power brake conversion... already have those. I do however would like to use a set up 88+ lift spindles.. I plan on swapping to a 3/4 ton rear end, and using a 6 lug front. my question is, will the lower ball joints bolt up to my stock lower control arm or like the pre 72s will i have to go with a 3/4ton arm? will an 81-87 3/4ton lower control arm work? will the upper ball joints fit the stock upper arm?

03-07-2005, 04:02 PM	#1
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,904	88+ suspension on 82 ..... ok... i read the thread on putting 88+ spindles and brakes on a pre 72... amazed it worked like it did... i dont need the power brake conversion... already have those. I do however would like to use a set up 88+ lift spindles.. I plan on swapping to a 3/4 ton rear end, and using a 6 lug front. my question is, will the lower ball joints bolt up to my stock lower control arm or like the pre 72s will i have to go with a 3/4ton arm? will an 81-87 3/4ton lower control arm work? will the upper ball joints fit the stock upper arm? __________________ Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.