1983 chevy 3/4 ton 4x4 pasrts truck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BIGCHEVYMAN · 03-10-2005, 04:54 PM

bought this truck as a project and pretty much lost interset. truck is a silverado that was factory 4 speed with diesel and no a/c. it has the np 205 t-case and sm465 trans, 10 bolt front and 14 bolt rear. front clip is off the truck but i think i have enough parts to peice one back together. truck has no motor, and clear title. $500 FOR PICTURES GOTO:
http://photobucket.com/albums/v397/BIGCHEVYMAN/

craig@ridetech.com · 03-10-2005, 06:22 PM

Could you get me some pics? email them to craigandemily@psci.net. Thanks!

clarkjw24 · 03-10-2005, 07:31 PM

Could I get some pics also clarkjw24@hardcore4x4.com

BIGCHEVYMAN · 03-10-2005, 09:39 PM

front clip is off of the truck already and the wheels are not for sale. it is the black and grey and i will try to get more pics later.

rich-white · 03-12-2005, 10:47 AM

Does title show truck as diesel?

rich-white · 03-12-2005, 10:48 AM

also needs pics of bed. Will be interested in whole truck but need pics of bed.

BIGCHEVYMAN · 03-12-2005, 04:45 PM

i don't know if the title says diesel i will look and get back to you. the bed is rough if you still want them i will get them.if you need a good bed i have a rust free lwb bed if your interested in that let me know.

rich-white · 03-12-2005, 09:33 PM

interested in lwb bed. need fuel door on pass. side or dual tank. If you have pics let me know. On the title need to know about diesel on title. In the great state of Misery I mean Missouri if a vehicle is diesel it does not have to go thru emissions testing

BIGCHEVYMAN · 03-12-2005, 10:28 PM

here in tennessee if you have a diesel vehicle it dose not have to pass emissions. all you have to do here is show them the title and tell them its a diesel. the rust free bed i have is only drivers side fuel tank,but i also have the rest of the truck so if you need the tank it is there. the bed on this 4x4 is dual tank but this bed is rough. here is a link to a few http://photobucket.com/albums/v397/BIGCHEVYMAN/

poolcues · 03-13-2005, 02:10 PM

pm sent.

poolcues · 03-13-2005, 02:20 PM

pm got kicked back so..

what gears are in the axles?does it have any rust on the cab(rockers,cab corners,etc.0will it come with any rims so i can roll it on a trailer?
thanks

BIGCHEVYMAN · 03-13-2005, 11:04 PM

it dose have rust in the cab corners and one rocker panel has a big dent in it.i think i have some roller wheels for it.not sure what gears it has.

muddyole 69 · 03-14-2005, 07:22 AM

Hi I have a friend looking for a long bed in good shape can I get pics and a price send to mikescarsandstuf@aol.com thanks Mike

03-10-2005, 04:54 PM	#1
BIGCHEVYMAN Senior Member Join Date: Apr 2002 Location: Portland , Tennessee , United States Posts: 1,024	1983 chevy 3/4 ton 4x4 pasrts truck bought this truck as a project and pretty much lost interset. truck is a silverado that was factory 4 speed with diesel and no a/c. it has the np 205 t-case and sm465 trans, 10 bolt front and 14 bolt rear. front clip is off the truck but i think i have enough parts to peice one back together. truck has no motor, and clear title. $500 FOR PICTURES GOTO: http://photobucket.com/albums/v397/BIGCHEVYMAN/ Last edited by BIGCHEVYMAN; 03-10-2005 at 09:08 PM. Reason: adding pictures

03-10-2005, 07:31 PM	#3
clarkjw24 I like cheese Join Date: Aug 2004 Location: McBee, SC Posts: 192	Could I get some pics also clarkjw24@hardcore4x4.com __________________ Cruiser: 1972 K5, 400/TH350/NP205, D44 and 12Bolt, 35 TSLs. Trail rig: 86 K5, 350 TBI, SM465/NP205, 5.13s, 14ff locked, h1 beadlocks, 42" TSLs, 64" rears, 56" fronts, D60 locked, 35pline, drive flanges, crossover, hydro assist, OBA. Tow rig: 2002 F350 PSD CC Dually FX4, chipped, cold air intake, BFGs

03-10-2005, 09:39 PM	#4
BIGCHEVYMAN Senior Member Join Date: Apr 2002 Location: Portland , Tennessee , United States Posts: 1,024	ok front clip is off of the truck already and the wheels are not for sale. it is the black and grey and i will try to get more pics later.

03-12-2005, 04:45 PM	#7
BIGCHEVYMAN Senior Member Join Date: Apr 2002 Location: Portland , Tennessee , United States Posts: 1,024	? i don't know if the title says diesel i will look and get back to you. the bed is rough if you still want them i will get them.if you need a good bed i have a rust free lwb bed if your interested in that let me know.

03-12-2005, 10:28 PM	#9
BIGCHEVYMAN Senior Member Join Date: Apr 2002 Location: Portland , Tennessee , United States Posts: 1,024	yup here in tennessee if you have a diesel vehicle it dose not have to pass emissions. all you have to do here is show them the title and tell them its a diesel. the rust free bed i have is only drivers side fuel tank,but i also have the rest of the truck so if you need the tank it is there. the bed on this 4x4 is dual tank but this bed is rough. here is a link to a few http://photobucket.com/albums/v397/BIGCHEVYMAN/

03-10-2005, 06:22 PM	#2
craig@ridetech.com Formerly LSC71 Join Date: Feb 2004 Location: Indiana Posts: 186	Could you get me some pics? email them to craigandemily@psci.net. Thanks!

03-12-2005, 10:47 AM	#5
rich-white Registered User Join Date: Feb 2004 Location: st. Louis Missouri Posts: 414	Does title show truck as diesel?

03-12-2005, 10:48 AM	#6
rich-white Registered User Join Date: Feb 2004 Location: st. Louis Missouri Posts: 414	also needs pics of bed. Will be interested in whole truck but need pics of bed.

03-12-2005, 09:33 PM	#8
rich-white Registered User Join Date: Feb 2004 Location: st. Louis Missouri Posts: 414	interested in lwb bed. need fuel door on pass. side or dual tank. If you have pics let me know. On the title need to know about diesel on title. In the great state of Misery I mean Missouri if a vehicle is diesel it does not have to go thru emissions testing

03-13-2005, 02:10 PM	#10
poolcues Registered User Join Date: Mar 2005 Location: Charlotte,NC Posts: 24	pm sent.

03-13-2005, 02:20 PM	#11
poolcues Registered User Join Date: Mar 2005 Location: Charlotte,NC Posts: 24	pm got kicked back so.. what gears are in the axles?does it have any rust on the cab(rockers,cab corners,etc.0will it come with any rims so i can roll it on a trailer? thanks

03-13-2005, 11:04 PM	#12
BIGCHEVYMAN Senior Member Join Date: Apr 2002 Location: Portland , Tennessee , United States Posts: 1,024	truck it dose have rust in the cab corners and one rocker panel has a big dent in it.i think i have some roller wheels for it.not sure what gears it has. Last edited by BIGCHEVYMAN; 03-13-2005 at 11:07 PM.

03-14-2005, 07:22 AM	#13
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	spare bed Hi I have a friend looking for a long bed in good shape can I get pics and a price send to mikescarsandstuf@aol.com thanks Mike __________________ hav'n fun be'n me



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.