|
04-07-2005, 10:09 PM
|
#1 |
|
computer illiterate
Join Date: Jan 2001
Location: Des Moines, IA
Posts: 6,440
|
repop blazer doors
anyone use them? how do they fit? would you buy them again? I need a good set of trim free doors for my 2wd blazer. anyone have any?
thanks keith
__________________
72 2wd blazer 72 swb 4x4 |
|
|
|
04-07-2005, 10:35 PM
|
#2 |
|
GO VOLS!
Join Date: May 2001
Location: Knoxville, TN
Posts: 724
|
You can make a set from truck doors if you have a blazer door handy to transfer measurements. I made my drivers side door. Truck doors should be easier to find atleast. I also have the measurements in the assembly manual if you need them.
__________________
http://1972blazer.shutterfly.com/<= blazer build pics It's called golf because all the other four letter words were taken. It's easier to ask for forgiveness than for permission. |
|
|
|
|
04-07-2005, 10:36 PM
|
#3 |
|
Registered User
Join Date: Jan 2002
Location: Canton, Georgia, USA
Posts: 1,119
|
I should be able to let you know by tomorrow night. I have one repop door that I hope to be edging out in the A.M. and mount by evening. I have an original passenger door and it is a good bit heavier. I have not mounted it yet, so I can't say anything about fit. I transferred the reinforement plate on the door latch and it would not fit. I had to do a little grinding on the plate for it to fit. I'll should be able to offer a little more info tomorrow night.
__________________
Jeremy (NUBOMB) 72K5 CST 350/350/205 1951 Chevy 1/2 ton North Georgia Group "... And the first rule to being a man is you gotta spend your life doing crap you don't wanna do." Red Forman. |
|
|
|
|
04-08-2005, 11:05 PM
|
#4 |
|
Registered User
Join Date: Jan 2002
Location: Canton, Georgia, USA
Posts: 1,119
|
I was wrong. We did not get as much done as we hoped and the doors could not be edged out. It will probably be at least a few weeks before I can get to it. I'll start a thread when I finally get them on.
__________________
Jeremy (NUBOMB) 72K5 CST 350/350/205 1951 Chevy 1/2 ton North Georgia Group "... And the first rule to being a man is you gotta spend your life doing crap you don't wanna do." Red Forman. |
|
|
|
|
04-08-2005, 11:18 PM
|
#5 |
|
computer illiterate
Join Date: Jan 2001
Location: Des Moines, IA
Posts: 6,440
|
i dont mind cutting down doors either. does anyone have any?
thanks keith
__________________
72 2wd blazer 72 swb 4x4 |
|
|
|
|
04-09-2005, 12:19 AM
|
#6 |
|
GO VOLS!
Join Date: May 2001
Location: Knoxville, TN
Posts: 724
|
I've got one passenger side door, but the bottom needs patched. You can have it If you're coming out this way in may for the chevy truck nats in pigeon forge.
__________________
http://1972blazer.shutterfly.com/<= blazer build pics It's called golf because all the other four letter words were taken. It's easier to ask for forgiveness than for permission. |
|
|
|
|
04-09-2005, 09:13 AM
|
#7 |
|
computer illiterate
Join Date: Jan 2001
Location: Des Moines, IA
Posts: 6,440
|
thnaks for the offer i put new inner and lower bottoms on the doors i have now and i got them tweaked about a 1/4 to a 1/2 inch so this time im just gonna try and buy some
thanks again keith
__________________
72 2wd blazer 72 swb 4x4 |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
