Lower control arms , tubular . anyone make them? Double hump Crossmembers?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**crossy** · 04-26-2005, 05:29 PM

It appears that no one(company) is listing tubular control arms for our trucks anymore???? is that right? all I can find is the ones for air bags now. I want standard or lowering type. thanx for ANY help .

Is the guy from the forum still making the double hump cross members or does anyone have one. Did they work out ? DAVE

**Captkaos** · 04-26-2005, 06:00 PM

Dave, DJM makes upper and lower control arms.
http://www.djmsuspension.com/Product...y/C10Parts.htm

I don't think anyone is making the double hump tranny crossmembers, but it is on my list.

*1FaastC10* · 04-26-2005, 06:25 PM

i dont think he ever came trough with any double humps. i could be wrong though.

r0lf- · 04-26-2005, 06:48 PM

Ok, dont mind my stupidity. Whats the advantages of Tubular Control arms other than weight? Strength?

gchemist · 04-26-2005, 08:16 PM

Tubular arms won't take the beating if you hit something on the road. Then you have to buy two again too.

I have one of the custom made double hump crossmembers. I have yet to install it.

Have big plans for the summer though.

SanitysBane · 04-26-2005, 08:58 PM

I will be making a doulbe hump cross memeber this summer.

*1FaastC10* · 04-26-2005, 11:11 PM

Quote:

Originally Posted by gchemist

Tubular arms won't take the beating if you hit something on the road. Then you have to buy two again too.

on the contrary, a tubular arm will take more of a beating than a stamped arm.

**crossy** · 04-26-2005, 11:15 PM

Quote:

Originally Posted by r0lf-

Ok, dont mind my stupidity. Whats the advantages of Tubular Control arms other than weight? Strength?

answered your own question as far as I' m concerned, ans correctly I might add, so whom ever told you that you are stupid- is stupiderrr.

ALSO with a lowered control arm Only the coil spring saddle sits down close to the road. NOT the whole A-arm. my truck currently has drop springs & spindles and is too damn low for me. Since I PLAN to race & drive the truck the weight MAY come into play. I'll have to see what they cost first. I bought a set years ago and we couldn't even get the the poly bushings to fit into them right. I need new lowers and I ran a WTB ad here on the forums but no one answered my call. local boneyard wants $50ea. -screw them! I've scrapped 6-7 good sets before but now that i want some ---- I may just redo a set of stockers. not sure yet. at least I got this friggin thing running anyway.
Don't let the wind out of my sails yet I just got the ship off the sandbar where it has been sitting for a year

to me. DAVE

**crossy** · 04-26-2005, 11:25 PM

Jeremy , I'm a little up in the air on that statement and don't want to argue either way but I can say that i don't think the tubular arm itself would half of beating the previous owner(Mr.A-hole as I like to call him) of my truck put the lower A arms through. Now thats talking frontal impact. Tubular A arms in general are VERY strong by design because of the triangulation and round tubing.

Hey Chris I Emailed you with a question but do not know if I have your current email addy so drop me at a line at my good ,old ,slow all4trux@snip.net if you don't get something from me today , thanx , DAVE

*1FaastC10* · 04-27-2005, 01:29 AM

Dave, i can see your point. i completely forgot about the spring bucket being lowered and exposed the way they are. seems kind of stupid to do it that way, just run a shorter spring and be done with it, instead they leave the spring bucket exposed and vulnerable. the last few sets of tubular LCAs i've seen were hand built, and were specifically built for light weight and improved strength, they didnt lower the vehicle at all.

86-C10-V6 · 04-27-2005, 01:56 PM

I was looking for Tubular A arms because I thought they were supposed to be stronger than the OEM stamped versions.
I have had no luck in finding any that were made for standard height, I don't want to lower or raise my truck, I just want a stronger A arm that doesn't bend so easily when I slide in that logging road ditch.
If anyone has a source please post it, the link listed above has only 3" drop parts.
Thanks

Slonaker · 04-27-2005, 03:39 PM

Quote:

Originally Posted by 86-C10-V6

I was looking for Tubular A arms because I thought they were supposed to be stronger than the OEM stamped versions.
I have had no luck in finding any that were made for standard height, I don't want to lower or raise my truck, I just want a stronger A arm that doesn't bend so easily when I slide in that logging road ditch.
If anyone has a source please post it, the link listed above has only 3" drop parts.
Thanks

Could you just box and gusset a set of stock control arms to make them stronger?

Slonaker

**crossy** · 04-27-2005, 05:41 PM

slonaker ,you beat me to that answer :-( , and any guy nick-named HACKSAW ought to be able to pull that off. I can't imagine anything short of tank parts that would be stronger than the stock ones if they hade a sort of flat skid plate welded across the bottoms , allow room for shocks though :-) .
maybe NOT drinking/driving on logging roads is a quicker answer. juskiddin

DAVE

**Captkaos** · 04-27-2005, 06:45 PM

Quote:

Originally Posted by crossy

Hey Chris I Emailed you with a question but do not know if I have your current email addy so drop me at a line at my good ,old ,slow all4trux@snip.net if you don't get something from me today , thanx , DAVE

I got it last night and sent you a reply. Check your email in a sec...

04-26-2005, 05:29 PM	#1
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	Lower control arms , tubular . anyone make them? Double hump Crossmembers?? It appears that no one(company) is listing tubular control arms for our trucks anymore???? is that right? all I can find is the ones for air bags now. I want standard or lowering type. thanx for ANY help . Is the guy from the forum still making the double hump cross members or does anyone have one. Did they work out ? DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

04-26-2005, 06:00 PM	#2
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Dave, DJM makes upper and lower control arms. http://www.djmsuspension.com/Product...y/C10Parts.htm I don't think anyone is making the double hump tranny crossmembers, but it is on my list. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

04-26-2005, 06:48 PM	#4
r0lf- Hotwheels? Join Date: Dec 2002 Location: Pleasant Hill, CA Posts: 1,145	Ok, dont mind my stupidity. Whats the advantages of Tubular Control arms other than weight? Strength? __________________ 1978 Money Pit - CUSTOM DELUXE!!!!

04-26-2005, 08:58 PM	#6
SanitysBane Registered User Join Date: May 2004 Location: Lubbock, Texas Posts: 2,121	I will be making a doulbe hump cross memeber this summer. __________________ '96 Nissan Pathfinder '02 Firebird Trans Am. '88 K5 Blazer

04-26-2005, 11:25 PM	#9
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	Jeremy , I'm a little up in the air on that statement and don't want to argue either way but I can say that i don't think the tubular arm itself would half of beating the previous owner(Mr.A-hole as I like to call him) of my truck put the lower A arms through. Now thats talking frontal impact. Tubular A arms in general are VERY strong by design because of the triangulation and round tubing. Hey Chris I Emailed you with a question but do not know if I have your current email addy so drop me at a line at my good ,old ,slow all4trux@snip.net if you don't get something from me today , thanx , DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

04-26-2005, 06:25 PM	#3
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	i dont think he ever came trough with any double humps. i could be wrong though.

04-26-2005, 08:16 PM	#5
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Tubular arms won't take the beating if you hit something on the road. Then you have to buy two again too. I have one of the custom made double hump crossmembers. I have yet to install it. Have big plans for the summer though.

04-27-2005, 01:29 AM	#10
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	Dave, i can see your point. i completely forgot about the spring bucket being lowered and exposed the way they are. seems kind of stupid to do it that way, just run a shorter spring and be done with it, instead they leave the spring bucket exposed and vulnerable. the last few sets of tubular LCAs i've seen were hand built, and were specifically built for light weight and improved strength, they didnt lower the vehicle at all.

04-27-2005, 01:56 PM	#11
86-C10-V6 Shadetree Mechanic Join Date: Oct 2002 Location: Youngsville, NC Posts: 100	Me Too I was looking for Tubular A arms because I thought they were supposed to be stronger than the OEM stamped versions. I have had no luck in finding any that were made for standard height, I don't want to lower or raise my truck, I just want a stronger A arm that doesn't bend so easily when I slide in that logging road ditch. If anyone has a source please post it, the link listed above has only 3" drop parts. Thanks __________________ Dave M. (Hacksaw) 86 C10 Scottsdale LWB, 4.3L, Edelbrock 1904, K&N, 700R4, 3.08 Auburn Performance 89 GMC S-15 Extended Cab 4x4, 4.3L, FI 98 K1500 Xcab, 5.7L, 3.43 Gov-Lok

04-27-2005, 05:41 PM	#13
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	slonaker ,you beat me to that answer :-( , and any guy nick-named HACKSAW ought to be able to pull that off. I can't imagine anything short of tank parts that would be stronger than the stock ones if they hade a sort of flat skid plate welded across the bottoms , allow room for shocks though :-) . maybe NOT drinking/driving on logging roads is a quicker answer. juskiddin DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.