FS: 72 A/C dash, North Tx. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fade94 · 05-09-2005, 08:57 AM

Dash came out of wrecked truck. Shipping would be high. Prefer to meet somone or you can come get it. $50 obo. I am 38 miles North of Dallas just off of HWY 75.

Putter · 05-09-2005, 09:37 AM

Hey, how far are you from Long View? (To me, North TX covers a lot of ground). I will be in Long View in two weeks...so.....

fade94 · 05-09-2005, 09:39 AM

I am 154 miles from Longview. I am 38 miles North of Dallas.

laid67c10 · 05-09-2005, 10:59 AM

Quote:

Originally Posted by Putter

Hey, how far are you from Long View? (To me, North TX covers a lot of ground). I will be in Long View in two weeks...so.....

longview is where i live...

Putter · 05-09-2005, 11:59 AM

Cool. I might have to holler at you. I am coming over to work out some more details on my house. I am going with Satterwhite for my materials.

flip66 · 05-09-2005, 12:09 PM

putter I will be in lonview friday night the 20th and sat the 21st for a wedding if that is the time you will be there i will bring it with me if you want. I have family that live there it takes about 2.5 hours to get to dallas from longview if you drive about 70 mph.

Putter · 05-09-2005, 12:26 PM

Hmmmmm. I will have to check. I am dropping off of I-20 for a second to pick up my dad (southeast Arkansas)....so I need to verify that our trip is still "a go". If we are still going that weekend, we would be there in Longview Saturday morning sometime.
So are you offering to pick it up from Fade and deliver it?
I will make a call and try to get that set up. (Plus, that is payday weekend!!!)

flip66 · 05-09-2005, 01:27 PM

putter yep I can do that going to be there any way. I know Fade94 so I am pretty sure he would be ok with it. Need to make sure I can get it in the car.

Fade94 how long and high is that thing you think it would fit in the trunk of my GP?

**hilljob26** · 05-09-2005, 08:07 PM

actually the shipping charge onm those is under 30 bucks,its not bad,i might have a whole a/c setup avalble soon,i have to decide whta i am doing w/it,but it is nice,all there,and the flapper in the cowl isn't broke,thats rare

Trifelynn · 05-09-2005, 08:56 PM

Well, if either one of you two gentlemen want to consider shipping on the A/C stuff, I would be interested. My blazer could use an A/C Dash

Lemme know...

thanks

Lenny

4tiresngas · 05-09-2005, 11:44 PM

Not trying to hi-jack this thread,but.....Does the entire dash bolt in? I have never seen one out. My dash is jacked up...some PO cut the radio opening all up. I have a patch for it, but I'd ather just bolt in a whole new dash if it just bolts in. And if so, and this one is not taken by those previosly interested, I'm interested if it can be shipped to So Cal 92310. Thanks.

fade94 · 05-10-2005, 08:13 AM

flip66- It would be tight, but I think it will fit. I can measure it when I get him this afternoon.

4tiresngas- The dash has 3 bolts at each end and it's spot welded at the front. If the windshield is out, as mine was, the spot welds can be drilled out. Since I was in somewhat of a hurry, I took a sawzall to it. I did NOT cut the dash, but the cowl. The spotwelds are still there.

As far as shipping it, it would take some thought on how to package it so it wouldn't get bent.

Putter · 05-10-2005, 10:01 AM

Fade,
If it will fit in Flip's car, I think I will take it. I will PM you on the money details. You can just let me know if it will fit in his car and we can hash out the details.

ERIC

laid67c10 · 05-10-2005, 10:41 AM

Quote:

Originally Posted by Putter

Cool. I might have to holler at you. I am coming over to work out some more details on my house. I am going with Satterwhite for my materials.

i live right down the road from satterwhite's, they build some nice log homes....if your not able to make it on the day flip will be in town let me know i'll pick it up for you and hold it till yah get here...

Putter · 05-10-2005, 12:14 PM

See....this is why I do all I can to help folks out on this board. The favor will always get back to you. I have to find out what time he will be tied up with the wedding. I know we will be there fairly early and staying until after lunch (longer if needed). If we can't get together, he will be in town on Friday also, and we might have to hand it off that way. I will let you know.

Satterwhite will provide the logs and other materials, but I am not getting them to do the work. When I lived in Arkansas, my father and I built two for other families, so we are doing mine as well. (Saves a bucket of cash that way)

laid67c10 · 05-11-2005, 01:01 AM

Quote:

Originally Posted by Putter

See....this is why I do all I can to help folks out on this board. The favor will always get back to you. I have to find out what time he will be tied up with the wedding. I know we will be there fairly early and staying until after lunch (longer if needed). If we can't get together, he will be in town on Friday also, and we might have to hand it off that way. I will let you know.

Satterwhite will provide the logs and other materials, but I am not getting them to do the work. When I lived in Arkansas, my father and I built two for other families, so we are doing mine as well. (Saves a bucket of cash that way)

cool just let me know and i'll help get it to yah, the more cash you save on building a house the more you can spend on your truck...

Putter · 05-11-2005, 10:19 AM

Looks like I am meeting up with Flip on Saturday morning. Ready to meet yet another member.

Putter · 05-11-2005, 12:16 PM

Hey Fade,
In case you didn't get the picture, here it is......

fade94 · 05-11-2005, 04:20 PM

Will do.

05-09-2005, 08:57 AM	#1
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	FS: 72 A/C dash, North Tx. Dash came out of wrecked truck. Shipping would be high. Prefer to meet somone or you can come get it. $50 obo. I am 38 miles North of Dallas just off of HWY 75. Attached Images __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear Last edited by fade94; 05-09-2005 at 09:40 AM.

05-09-2005, 09:37 AM	#2
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Hey, how far are you from Long View? (To me, North TX covers a lot of ground). I will be in Long View in two weeks...so..... __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

05-09-2005, 09:39 AM	#3
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	I am 154 miles from Longview. I am 38 miles North of Dallas. __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

05-09-2005, 11:59 AM	#5
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Cool. I might have to holler at you. I am coming over to work out some more details on my house. I am going with Satterwhite for my materials. __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

05-09-2005, 12:09 PM	#6
flip66 Registered User Join Date: Jan 2004 Location: Garland TX Dallas area Posts: 658	putter I will be in lonview friday night the 20th and sat the 21st for a wedding if that is the time you will be there i will bring it with me if you want. I have family that live there it takes about 2.5 hours to get to dallas from longview if you drive about 70 mph. __________________ 1998 Pontiac Grad Prix GTP 1969 C10 396 TH400 3.08 posi

05-09-2005, 12:26 PM	#7
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Hmmmmm. I will have to check. I am dropping off of I-20 for a second to pick up my dad (southeast Arkansas)....so I need to verify that our trip is still "a go". If we are still going that weekend, we would be there in Longview Saturday morning sometime. So are you offering to pick it up from Fade and deliver it? I will make a call and try to get that set up. (Plus, that is payday weekend!!!) __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket** Last edited by Putter; 05-09-2005 at 12:27 PM.

05-09-2005, 01:27 PM	#8
flip66 Registered User Join Date: Jan 2004 Location: Garland TX Dallas area Posts: 658	putter yep I can do that going to be there any way. I know Fade94 so I am pretty sure he would be ok with it. Need to make sure I can get it in the car. Fade94 how long and high is that thing you think it would fit in the trunk of my GP? __________________ 1998 Pontiac Grad Prix GTP 1969 C10 396 TH400 3.08 posi Last edited by flip66; 05-09-2005 at 05:21 PM.

05-09-2005, 08:07 PM	#9
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	actually the shipping charge onm those is under 30 bucks,its not bad,i might have a whole a/c setup avalble soon,i have to decide whta i am doing w/it,but it is nice,all there,and the flapper in the cowl isn't broke,thats rare __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343

05-09-2005, 08:56 PM	#10
Trifelynn Registered User Join Date: May 2004 Location: Williston, North Dakota Posts: 469	Well, if either one of you two gentlemen want to consider shipping on the A/C stuff, I would be interested. My blazer could use an A/C Dash Lemme know... thanks Lenny __________________ Always looking for a 2wd blazer

05-09-2005, 11:44 PM	#11
4tiresngas An American Soldier Join Date: Feb 2005 Location: Grumolo D' Abadessee, Italy Posts: 503	Not trying to hi-jack this thread,but.....Does the entire dash bolt in? I have never seen one out. My dash is jacked up...some PO cut the radio opening all up. I have a patch for it, but I'd ather just bolt in a whole new dash if it just bolts in. And if so, and this one is not taken by those previosly interested, I'm interested if it can be shipped to So Cal 92310. Thanks. __________________ Dan dan.brue@us.army.mil

05-10-2005, 08:13 AM	#12
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	flip66- It would be tight, but I think it will fit. I can measure it when I get him this afternoon. 4tiresngas- The dash has 3 bolts at each end and it's spot welded at the front. If the windshield is out, as mine was, the spot welds can be drilled out. Since I was in somewhat of a hurry, I took a sawzall to it. I did NOT cut the dash, but the cowl. The spotwelds are still there. As far as shipping it, it would take some thought on how to package it so it wouldn't get bent. __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

05-10-2005, 10:01 AM	#13
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Fade, If it will fit in Flip's car, I think I will take it. I will PM you on the money details. You can just let me know if it will fit in his car and we can hash out the details. ERIC __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

05-10-2005, 12:14 PM	#15
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	See....this is why I do all I can to help folks out on this board. The favor will always get back to you. I have to find out what time he will be tied up with the wedding. I know we will be there fairly early and staying until after lunch (longer if needed). If we can't get together, he will be in town on Friday also, and we might have to hand it off that way. I will let you know. Satterwhite will provide the logs and other materials, but I am not getting them to do the work. When I lived in Arkansas, my father and I built two for other families, so we are doing mine as well. (Saves a bucket of cash that way) __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

05-11-2005, 10:19 AM	#17
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Looks like I am meeting up with Flip on Saturday morning. Ready to meet yet another member. __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

05-11-2005, 12:16 PM	#18
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Hey Fade, In case you didn't get the picture, here it is...... Attached Images __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**



Register or Log In To remove these advertisements.

05-11-2005, 04:20 PM	#19
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	Will do. __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

Register or Log In To remove these advertisements.