|
06-21-2005, 11:41 PM
|
#1 |
|
Registered User
Join Date: Sep 2004
Location: IA
Posts: 118
|
passenger upper hinge
I need to adjust the passenger side door on my 86 C10. It has some cheap aftermarket doors installed by the previous owner. I need to move the upper hinge on the pillar on the passenger side forward. I removed the door and saw that there are two bolts I could loosen from the outside. There is a third that appears to be bolted in from the interior. I removed the dash but could not find this bolt. It appears to be behind the dash metal. Is this correct? I figure there must be someway to loosen this bolt. Any suggestions?
|
|
|
|
06-22-2005, 12:44 AM
|
#2 |
|
Registered User
Join Date: Oct 2002
Location: where it's hot
Posts: 1,059
|
you do not need to remove the dash . If you feel around on the inside behind the hinge you will find a hole in the inside sheet metal and the bolt will be in there . On at least 1 truck have seen those round pop out covers covering the holes , yours may be one .
|
|
|
|
|
06-22-2005, 03:12 AM
|
#3 |
|
ureckmefixit2@cox.net
Join Date: Dec 2004
Location: Mesa AZ. (Phoenix)
Posts: 1,284
|
Hay just remove the glove box not the hole dash.
__________________
That's U RECK ME FIX it 2 74 Chevy Short Bed 355ci Sportsman II 64cc Angle Plug Crower Custom Grind .462in .486ex Dyno Test 422hp @ 5600 And it's got a Holley 3.73 Gears 12 Bolt 3.73 w/Posi 700R4 Going In I'm a Body Man So There! That's why it's not painted |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
