65 parts/ East Texas - The 1947 - Present Chevrolet & GMC Truck Message Board Network

swampstander · 06-24-2005, 10:19 AM

Have a few parts left from my 65 swb.

Grille no dents, surface rust sprayed rattle can flat black $40

Drive shaft $40

Rear end out of a 70-72 Get rid of those nasty 6 lug wheels! $100

Front turn signal lenses, bezels and housings $20

Big rear glass $30

Tilt column out of a mid 70's chevy van $100

Rusty chrome 6 lug wheels $20 set of four

Rear 2in lowering blocks with u-bolts $20 Sold

Radiator with brand new aftermarket trans cooler attached $40

Misc cab trim, ask

You may pay by paypal, cashiers check, MO or cash in hand.
Shipping for smaller items is in addition to the price. Larger items need to be picked up. Please post here or Email if interested.

Thanks
Swampstander

tromper · 06-24-2005, 11:02 AM

I could really use the
Rear 2in lowering blocks with u-bolts $20

These are specifically for the 60-66 truck right?
With the thick u-bolts?
Not just a universal kit?

Thanks!
Mike in Dallas

blackhat · 06-24-2005, 02:14 PM

I have had a 63 since 94 never having alot of money to change things,I would like to learn to learn to do it my self acually,dont have much of a choice if I have the original 63 rearend in there that some one want to buy for a 100 which means I could buy your 67 or if yo sold it one closer t0 sc,my ? is once I switch out the rear ends with a manual I hope I can get from the library or by talking to people how does that change the truck ,meaning I Ilike automatic over manual,I like disc over drum,meaning I like the updates a 67 brought doues changing the rear end just change the wheel and the gear ratio or does it open the door to other updates,thanks blackhat

swampstander · 06-24-2005, 09:53 PM

tromper,
These u bolts are made by a machine shop out of threaded 3/4in cold rolled steel bar specifically for this truck. I will check on shipping to your location if you would like me to.

blackhat,
I dont know exactly what you are asking.

ChopTop · 06-26-2005, 02:43 PM

sent you a message on parts.

swampstander · 06-28-2005, 10:13 AM

Chop top,

sent a reply

Jeff Hatley · 07-27-2005, 12:12 PM

Do you still have the frame?

If so, is it straight? How much??

swampstander · 07-27-2005, 12:48 PM

Yes I still have the Frame. No title though. perfectly straight. Has 5 lug disc brake setup from mid 70's p/u. Lowered one inch. $150.

Give me $200 and I will throw in a 5 lug rear end.

Jeff Hatley · 07-27-2005, 02:08 PM

Good deal.

Sounds like what I am looking for.

Where in E. Texas are you located?

swampstander · 07-27-2005, 09:21 PM

I am in Palestine. Email me at r_kubara@yahoo.com

gostranger · 07-28-2005, 06:19 AM

what cab trim do you have looking for the custom wintow trim front and back let me know thanks

swampstander · 07-28-2005, 11:17 AM

I have windshield trim but no clips

gostranger · 07-28-2005, 01:08 PM

can you pm me a price shipped to 14532 i might not be able to respond untill monday also do you know where to get clips?thanks

72swb4me · 08-03-2005, 03:03 PM

Is the rear end out of a 70-72 still available?

swampstander · 08-03-2005, 04:10 PM

yes. Please email if interested
r_kubara@yahoo.com

06-24-2005, 10:19 AM	#1
swampstander Registered User Join Date: Apr 2005 Location: palestine tx Posts: 25	65 parts/ East Texas Have a few parts left from my 65 swb. Grille no dents, surface rust sprayed rattle can flat black $40 Drive shaft $40 Rear end out of a 70-72 Get rid of those nasty 6 lug wheels! $100 Front turn signal lenses, bezels and housings $20 Big rear glass $30 Tilt column out of a mid 70's chevy van $100 Rusty chrome 6 lug wheels $20 set of four Rear 2in lowering blocks with u-bolts $20 Sold Radiator with brand new aftermarket trans cooler attached $40 Misc cab trim, ask You may pay by paypal, cashiers check, MO or cash in hand. Shipping for smaller items is in addition to the price. Larger items need to be picked up. Please post here or Email if interested. Thanks Swampstander Last edited by swampstander; 08-03-2005 at 04:08 PM.

06-26-2005, 02:43 PM	#5
ChopTop Registered User Join Date: Jun 2001 Location: KINGWOOD TEXAS Posts: 515	your junk sent you a message on parts. __________________ Member of the "Old Farts Club"

07-27-2005, 12:12 PM	#7
Jeff Hatley Registered User Join Date: May 2004 Posts: 4	Frame Do you still have the frame? If so, is it straight? How much??

08-03-2005, 03:03 PM	#14
72swb4me Registered User Join Date: Feb 2005 Location: Dallas, TX Posts: 90	Rear end out of a 70-72 Is the rear end out of a 70-72 still available?

06-24-2005, 11:02 AM	#2
tromper Registered User Join Date: Jun 2005 Location: Dallas Texas Posts: 21	I could really use the Rear 2in lowering blocks with u-bolts $20 These are specifically for the 60-66 truck right? With the thick u-bolts? Not just a universal kit? Thanks! Mike in Dallas

06-24-2005, 02:14 PM	#3
blackhat Registered User Join Date: Jun 2005 Posts: 6	I have had a 63 since 94 never having alot of money to change things,I would like to learn to learn to do it my self acually,dont have much of a choice if I have the original 63 rearend in there that some one want to buy for a 100 which means I could buy your 67 or if yo sold it one closer t0 sc,my ? is once I switch out the rear ends with a manual I hope I can get from the library or by talking to people how does that change the truck ,meaning I Ilike automatic over manual,I like disc over drum,meaning I like the updates a 67 brought doues changing the rear end just change the wheel and the gear ratio or does it open the door to other updates,thanks blackhat

06-24-2005, 09:53 PM	#4
swampstander Registered User Join Date: Apr 2005 Location: palestine tx Posts: 25	tromper, These u bolts are made by a machine shop out of threaded 3/4in cold rolled steel bar specifically for this truck. I will check on shipping to your location if you would like me to. blackhat, I dont know exactly what you are asking.

06-28-2005, 10:13 AM	#6
swampstander Registered User Join Date: Apr 2005 Location: palestine tx Posts: 25	Chop top, sent a reply

07-27-2005, 12:48 PM	#8
swampstander Registered User Join Date: Apr 2005 Location: palestine tx Posts: 25	Yes I still have the Frame. No title though. perfectly straight. Has 5 lug disc brake setup from mid 70's p/u. Lowered one inch. $150. Give me $200 and I will throw in a 5 lug rear end.

07-27-2005, 02:08 PM	#9
Jeff Hatley Registered User Join Date: May 2004 Posts: 4	Good deal. Sounds like what I am looking for. Where in E. Texas are you located?

07-27-2005, 09:21 PM	#10
swampstander Registered User Join Date: Apr 2005 Location: palestine tx Posts: 25	I am in Palestine. Email me at r_kubara@yahoo.com

07-28-2005, 06:19 AM	#11
gostranger 65 suburban vortec 5.3 bagged Join Date: Jun 2005 Location: upstate new york Posts: 1,317	what cab trim do you have looking for the custom wintow trim front and back let me know thanks

07-28-2005, 11:17 AM	#12
swampstander Registered User Join Date: Apr 2005 Location: palestine tx Posts: 25	I have windshield trim but no clips

07-28-2005, 01:08 PM	#13
gostranger 65 suburban vortec 5.3 bagged Join Date: Jun 2005 Location: upstate new york Posts: 1,317	can you pm me a price shipped to 14532 i might not be able to respond untill monday also do you know where to get clips?thanks



Register or Log In To remove these advertisements.

08-03-2005, 04:10 PM	#15
swampstander Registered User Join Date: Apr 2005 Location: palestine tx Posts: 25	yes. Please email if interested r_kubara@yahoo.com

Register or Log In To remove these advertisements.