Possible 82 SWB part out... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

87 Shortwide · 06-29-2005, 03:33 AM

Well, since we couldn't sell the truck, if the motor or rearend get bought, then the rest will be up for grabs also...

Engine for sale:
350 Smallblock Chevrolet Bored .060 to 359 c.i.
9.1 COMPRESSION RATIO WITH STEEL 72cc HEADS
HYDRAULIC SPLIT DURATION CAMSHAFT—
DURATION @ .050= 224°/234° LIFT= .465”/ .488”
EDELBROCK PERFORMER RPM INTAKE

-Engine is complete intake to pan minus distributor and carb (can be added for extra) The distributor is an Accel HEI supercoil and it's got Moroso 8mm wires along with a Holley 600cfm vaccum secondary carb with annular discharge. It is in the truck and running right now, so anyone close by could come hear it run. Engine minus carb and ignition: $900.00

Rearend for Sale:
10 bolt truck rearend with GM posi unit and 4.10 gears. Recently put together with a new gear install kit and all the bearings etc...
$600.00 straight buy or $500.00 if you can provide some core so we can keep it a rolling chassis.

If one of these happens to sell, then a whole slew of parts will come available including but not limited to: a complete lowering kit, headers with 2.5" flowmaster exhaust, rolling chassis pickup, CalTrac traction bars, brand new LMC doors in the boxes still, and other misc. parts.

87 Shortwide · 06-29-2005, 03:42 AM

and this is in the wrong forum...

Can a mod please kick it to the 73-87 parts board? Thanks

79Silv4x4 · 06-29-2005, 06:17 AM

Bed any good?

bigarmzz · 06-29-2005, 08:36 AM

ya really ought to post some pics

Quote:

Originally Posted by 87 Shortwide

Well, since we couldn't sell the truck, if the motor or rearend get bought, then the rest will be up for grabs also...

Engine for sale:
350 Smallblock Chevrolet Bored .060 to 359 c.i.
9.1 COMPRESSION RATIO WITH STEEL 72cc HEADS
HYDRAULIC SPLIT DURATION CAMSHAFT—
DURATION @ .050= 224°/234° LIFT= .465”/ .488”
EDELBROCK PERFORMER RPM INTAKE

-Engine is complete intake to pan minus distributor and carb (can be added for extra) The distributor is an Accel HEI supercoil and it's got Moroso 8mm wires along with a Holley 600cfm vaccum secondary carb with annular discharge. It is in the truck and running right now, so anyone close by could come hear it run. Engine minus carb and ignition: $900.00

Rearend for Sale:
10 bolt truck rearend with GM posi unit and 4.10 gears. Recently put together with a new gear install kit and all the bearings etc...
$600.00 straight buy or $500.00 if you can provide some core so we can keep it a rolling chassis.

If one of these happens to sell, then a whole slew of parts will come available including but not limited to: a complete lowering kit, headers with 2.5" flowmaster exhaust, rolling chassis pickup, CalTrac traction bars, brand new LMC doors in the boxes still, and other misc. parts.

86 GMG · 06-29-2005, 10:36 AM

i want the front bumper if it is the one with the turning signal light in it. this is only if you part it out like i took your post but it kinda sound like it will be sold in big items motor, rear-end, truck.

corn · 06-29-2005, 11:32 AM

Please put me first in line for the drive shaft & also a few pics of your blazer!

Is it a fleet or a stepper? I need step fenders. Thanks...corn

87 Shortwide · 06-29-2005, 01:07 PM

It's a Fleet, bedsides suck, but I've got some others also that are rust free. Basically we are trying to sell the performance stuff, then we will try to sell the whole truck as a roller. If that doesn't work, we'll go from there...

Here is a link to the ebay auction it was on with lots of pics.... We found a worthless bidder who couldn't pay up

http://cgi.ebay.com/ebaymotors/ws/eB...sPageName=WDVW

82c10 · 06-29-2005, 06:18 PM

if you manage to sell one of them, how much for lowering kit, and traction bars, and doors

milehightoyz · 06-30-2005, 01:35 AM

i can recall offering to buy that truck from you a couple times if you could drive it to denver??? at any rate, i need drop parts

87 Shortwide · 07-02-2005, 04:17 AM

Engine sold

Drop parts, rearend, doors, exhaust, Caltracs, and rolling chassis truck are now for sale

milehightoyz · 07-02-2005, 02:45 PM

can i get a price on the complete lowering kit and also the complete exhaust? also what size rotor on the front? thanks john

1987 Shortwide · 07-11-2005, 01:40 AM

OK

Sale pending on wheels
Long shaft TH350 built with a 2800-3200 stall converter - 300.00

Belltech 3" spindles, AIM 2" springs, Belltech Shackl and hangar kit, and nitro drop shocks - $275.00

De-arched leafs (completes 5/7 drop on truck) $75.00

Longtube headers (uncoated and used) $50.00

2.5" Flowmaster exhaust- fits SWB (and stepper with minor mods) all aluminized pipe mandrel bent. - $250.00

8.5" 10 bolt rearend with new GM posi unit and 4.10 gears. $500.00 or $400.00 if you can provide a good stock core.

Fairly new great condition Caltrac traction bars. - $200.00

Brand new LMC doors still in the boxes, come with outer weatherstripping - $300.00

The final rolling chassis will be for sale also, but price will depend on how other things sell. If you may be interested in the rolling chassis with other parts let me know, we can maybe deal on it.

All prices are without shipping, I am located in Wichita Ks, 67210 for pickup or shipping quotes.

milehightoyz · 07-11-2005, 02:29 AM

are the spindles for 1" or 1.25" rotors? and would you seperate? id like the spindles and shocks. i plan on flipping the rear. thanks john.

**Ironhorse** · 07-11-2005, 05:11 AM

If you are parting the truck as pieces I am interested in the dash pad. Any cracks, tears, or cuts? Color? Looking for blue dash pad but will color a nice one. I'm in Wellington, 30 clicks south of you. Can pick up dash so shipping wouldn't be a problem.

1987 Shortwide · 07-11-2005, 12:52 PM

Milehightoyz, I'll check on the diameter of the spindle, and ask my brother if he is willing to part out the lowering components.

Ironhorse, the dash has a black cap over it.

**Ironhorse** · 07-11-2005, 09:20 PM

Thanks for the reply, guess I'm still lookin' for that elusive, decent dash pad.

milehightoyz · 07-12-2005, 04:06 AM

sounds good thank you please let me know im definitely interested in them

milehightoyz · 07-15-2005, 03:28 AM

bump for drop kit info

06-29-2005, 03:33 AM	#1
87 Shortwide Registered User Join Date: Nov 2002 Location: Wichita Ks Posts: 536	Possible 82 SWB part out... Well, since we couldn't sell the truck, if the motor or rearend get bought, then the rest will be up for grabs also... Engine for sale: 350 Smallblock Chevrolet Bored .060 to 359 c.i. 9.1 COMPRESSION RATIO WITH STEEL 72cc HEADS HYDRAULIC SPLIT DURATION CAMSHAFT— DURATION @ .050= 224°/234° LIFT= .465”/ .488” EDELBROCK PERFORMER RPM INTAKE -Engine is complete intake to pan minus distributor and carb (can be added for extra) The distributor is an Accel HEI supercoil and it's got Moroso 8mm wires along with a Holley 600cfm vaccum secondary carb with annular discharge. It is in the truck and running right now, so anyone close by could come hear it run. Engine minus carb and ignition: $900.00 Rearend for Sale: 10 bolt truck rearend with GM posi unit and 4.10 gears. Recently put together with a new gear install kit and all the bearings etc... $600.00 straight buy or $500.00 if you can provide some core so we can keep it a rolling chassis. If one of these happens to sell, then a whole slew of parts will come available including but not limited to: a complete lowering kit, headers with 2.5" flowmaster exhaust, rolling chassis pickup, CalTrac traction bars, brand new LMC doors in the boxes still, and other misc. parts. __________________ Daily Driver: 1992 Blazer dropped on rallys Project: 87 GMC shortwide, About to get a little boost Last edited by 87 Shortwide; 06-29-2005 at 03:36 AM.

06-29-2005, 03:42 AM	#2
87 Shortwide Registered User Join Date: Nov 2002 Location: Wichita Ks Posts: 536	and this is in the wrong forum... Can a mod please kick it to the 73-87 parts board? Thanks __________________ Daily Driver: 1992 Blazer dropped on rallys Project: 87 GMC shortwide, About to get a little boost

06-29-2005, 10:36 AM	#5
86 GMG Registered User Join Date: Apr 2005 Location: Tulsa Oklahoma Posts: 943	i want the front bumper if it is the one with the turning signal light in it. this is only if you part it out like i took your post but it kinda sound like it will be sold in big items motor, rear-end, truck. __________________ square body trucks an addiction or an investment either way they consume all my extra time and money

06-29-2005, 01:07 PM	#7
87 Shortwide Registered User Join Date: Nov 2002 Location: Wichita Ks Posts: 536	It's a Fleet, bedsides suck, but I've got some others also that are rust free. Basically we are trying to sell the performance stuff, then we will try to sell the whole truck as a roller. If that doesn't work, we'll go from there... Here is a link to the ebay auction it was on with lots of pics.... We found a worthless bidder who couldn't pay up http://cgi.ebay.com/ebaymotors/ws/eB...sPageName=WDVW __________________ Daily Driver: 1992 Blazer dropped on rallys Project: 87 GMC shortwide, About to get a little boost Last edited by 87 Shortwide; 06-29-2005 at 01:10 PM.

07-02-2005, 04:17 AM	#10
87 Shortwide Registered User Join Date: Nov 2002 Location: Wichita Ks Posts: 536	Engine sold Drop parts, rearend, doors, exhaust, Caltracs, and rolling chassis truck are now for sale __________________ Daily Driver: 1992 Blazer dropped on rallys Project: 87 GMC shortwide, About to get a little boost

06-29-2005, 06:17 AM	#3
79Silv4x4 Workaholic Join Date: Oct 2002 Location: Katy, TX Posts: 1,589	Bed any good?

06-29-2005, 11:32 AM	#6
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	Please put me first in line for the drive shaft & also a few pics of your blazer! Is it a fleet or a stepper? I need step fenders. Thanks...corn

06-29-2005, 06:18 PM	#8
82c10 needin' money Join Date: May 2005 Location: Chickasha, Oklahoma Posts: 1,106	if you manage to sell one of them, how much for lowering kit, and traction bars, and doors

06-30-2005, 01:35 AM	#9
milehightoyz AttentionDeficitDisorder Join Date: Mar 2005 Location: COLORADO Posts: 600	i can recall offering to buy that truck from you a couple times if you could drive it to denver??? at any rate, i need drop parts

07-02-2005, 02:45 PM	#11
milehightoyz AttentionDeficitDisorder Join Date: Mar 2005 Location: COLORADO Posts: 600	can i get a price on the complete lowering kit and also the complete exhaust? also what size rotor on the front? thanks john

07-11-2005, 01:40 AM	#12
1987 Shortwide Senior Member Join Date: Feb 2003 Location: Wichita KS Posts: 610	OK Sale pending on wheels Long shaft TH350 built with a 2800-3200 stall converter - 300.00 Belltech 3" spindles, AIM 2" springs, Belltech Shackl and hangar kit, and nitro drop shocks - $275.00 De-arched leafs (completes 5/7 drop on truck) $75.00 Longtube headers (uncoated and used) $50.00 2.5" Flowmaster exhaust- fits SWB (and stepper with minor mods) all aluminized pipe mandrel bent. - $250.00 8.5" 10 bolt rearend with new GM posi unit and 4.10 gears. $500.00 or $400.00 if you can provide a good stock core. Fairly new great condition Caltrac traction bars. - $200.00 Brand new LMC doors still in the boxes, come with outer weatherstripping - $300.00 The final rolling chassis will be for sale also, but price will depend on how other things sell. If you may be interested in the rolling chassis with other parts let me know, we can maybe deal on it. All prices are without shipping, I am located in Wichita Ks, 67210 for pickup or shipping quotes. __________________ ~Steve~ Friesen High Performance Auto and Graphics Toy: 87 Shortwide, 406 smallblock with a little boost My 87 buildup Daily Driver: 99 Sierra SLE 4X4. Black on Black and harder than hell to keep clean. Last edited by 1987 Shortwide; 07-11-2005 at 01:48 AM.

07-11-2005, 02:29 AM	#13
milehightoyz AttentionDeficitDisorder Join Date: Mar 2005 Location: COLORADO Posts: 600	are the spindles for 1" or 1.25" rotors? and would you seperate? id like the spindles and shocks. i plan on flipping the rear. thanks john.

07-11-2005, 05:11 AM	#14
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	If you are parting the truck as pieces I am interested in the dash pad. Any cracks, tears, or cuts? Color? Looking for blue dash pad but will color a nice one. I'm in Wellington, 30 clicks south of you. Can pick up dash so shipping wouldn't be a problem. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

07-11-2005, 12:52 PM	#15
1987 Shortwide Senior Member Join Date: Feb 2003 Location: Wichita KS Posts: 610	Milehightoyz, I'll check on the diameter of the spindle, and ask my brother if he is willing to part out the lowering components. Ironhorse, the dash has a black cap over it. __________________ ~Steve~ Friesen High Performance Auto and Graphics Toy: 87 Shortwide, 406 smallblock with a little boost My 87 buildup Daily Driver: 99 Sierra SLE 4X4. Black on Black and harder than hell to keep clean.

07-11-2005, 09:20 PM	#16
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Thanks for the reply, guess I'm still lookin' for that elusive, decent dash pad. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks



Register or Log In To remove these advertisements.

07-12-2005, 04:06 AM	#17
milehightoyz AttentionDeficitDisorder Join Date: Mar 2005 Location: COLORADO Posts: 600	sounds good thank you please let me know im definitely interested in them

07-15-2005, 03:28 AM	#18
milehightoyz AttentionDeficitDisorder Join Date: Mar 2005 Location: COLORADO Posts: 600	bump for drop kit info

Register or Log In To remove these advertisements.