|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
07-21-2005, 06:00 PM
|
#1 |
|
Registered User
Join Date: Sep 2002
Location: Fort Worth
Posts: 1,409
|
Ac line aluminum galled - Any fixes or need to replace
I have the line coming out my condenser that is aluminum and the line has a steel fitting. The aluminum is galled enogh that it is leaking. Are there any fiexs for this or do I have to spend the 200 for a replacement one. (I have just replaced with a new compressor, accumaltor, and o ring last weekend.)
__________________
1969 Chevy LWB - with shaved handles; 3 1/2 front/ 5 1/2 rear drop; (waiting to be put back together) |
|
|
|
07-21-2005, 08:05 PM
|
#2 |
|
Registered User
  
Join Date: Feb 2004
Location: Williamsburg, Ohio
Posts: 1,807
|
depends
Most likely you will have to replace the condenser. This should be an o-ring fitting. Carefully remove the burr --clean with alcohol of your choice -- use epoxy or lab metal with a smooth finish. Let hardened thoroughly. If you have a hole clear thru thru line, find a friend with a TIG welder.
|
|
|
|
|
07-21-2005, 08:54 PM
|
#3 | |
|
Registered User
Join Date: Dec 2003
Location: Stockton, CA
Posts: 1,579
|
Quote:
__________________
For every person with a spark of genius, There are a hundred with ignition trouble.  70 Short/Step
|
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
