anyone need a 400 short block - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mike in mo · 08-05-2005, 10:54 PM

i need to clean up some things around here so i got a 400sbc that i pulled from a 78 blazer.its just block crank and pistons still together $100 or best offer pick up here centralia mo or you make the shipping plans will put on pallet and take to columbia mo for a extra $20.

rgray71 · 08-05-2005, 11:18 PM

Hey my dad live in Ladonia and my step mom work for the police dept there in centralia. Let me get with them and see if they can pick it up and how I can get the money to you.

mike in mo · 08-06-2005, 12:32 PM

a us money order works for payment. email me at ogre69us@yahoo.com for my addresse.

rgray71 · 08-08-2005, 06:54 AM

I am gonna have to pass. my dad isn't able to pick it up and my Monte Carlo broke down yesterday. So the money is going to get it fixed again.

Lizzard27 · 08-09-2005, 09:48 PM

I sure wish u wanted a 350 4bolt main and was closer I would love to have the motor
do u need any parts or any thing I just got a new job and if u still have it in a few
weeks I will be glad to get it if we cant work out something else

CHEVYE · 08-10-2005, 11:13 AM

geez, if you were only a little closer

.

cynergygoon · 08-12-2005, 02:00 AM

do you still have the engine? is it standard bore, standard crank or has it been bored and the crank turned. i live in lebanon so i could come and pick it up pretty easy i go to columbia quite a bit. let me know i would be interested if its standard.

mike in mo · 08-12-2005, 12:42 PM

yup i still got it. bore well i dont see an oversize stamped on the piston and i have no idea what stock is the oil pan is still on it so i dont know about the crank. ill pull the pan and see about the crank. what is stock bore?

CHEVYE · 08-12-2005, 12:46 PM

stock bore should be 4.125"

mike in mo · 08-12-2005, 03:34 PM

well its stock bore then. pan still not off so noo word on the crank yet

cynergygoon · 08-13-2005, 04:49 AM

let me know when you find out what the crank is. im interested in it. pull a rod and a main cap and look on the underside of the bearing for the undersize of the crank. just in case you didnt know. should be something like .010 or .020 something like that thanks.

mike in mo · 08-17-2005, 03:17 PM

ok i got the pan off todayno over size bearings so its standerd too

74 shorty · 08-17-2005, 07:11 PM

whats the lowest pickup price???

mike in mo · 08-17-2005, 07:34 PM

$100 is the lowest price now as i seen bare blocks on ebay going for 200 if its not worht 100 ill send it to the iron pile.

74 shorty · 08-17-2005, 08:11 PM

What is all included, short block or long block, did it run when taken out. Any heads on it??? Sorry if I duplicated a ?

mike in mo · 08-17-2005, 09:16 PM

its block crank pistons rods and balancer it ran but had a noise in the lower end no heads i need them for my other 400.

08-05-2005, 10:54 PM	#1
mike in mo Registered User Join Date: Jul 2005 Location: centralia missouri Posts: 123	anyone need a 400 short block i need to clean up some things around here so i got a 400sbc that i pulled from a 78 blazer.its just block crank and pistons still together $100 or best offer pick up here centralia mo or you make the shipping plans will put on pallet and take to columbia mo for a extra $20.

08-10-2005, 11:13 AM	#6
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	geez, if you were only a little closer . __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

08-12-2005, 12:46 PM	#9
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	stock bore should be 4.125" __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

08-05-2005, 11:18 PM	#2
rgray71 Registered User Join Date: Jan 2005 Location: Tonganoxie, Ks Posts: 180	Hey my dad live in Ladonia and my step mom work for the police dept there in centralia. Let me get with them and see if they can pick it up and how I can get the money to you.

08-06-2005, 12:32 PM	#3
mike in mo Registered User Join Date: Jul 2005 Location: centralia missouri Posts: 123	a us money order works for payment. email me at ogre69us@yahoo.com for my addresse.

08-08-2005, 06:54 AM	#4
rgray71 Registered User Join Date: Jan 2005 Location: Tonganoxie, Ks Posts: 180	I am gonna have to pass. my dad isn't able to pick it up and my Monte Carlo broke down yesterday. So the money is going to get it fixed again.

08-09-2005, 09:48 PM	#5
Lizzard27 Senior Member Join Date: Jun 2005 Location: Gladewater Tx. Posts: 382	I sure wish u wanted a 350 4bolt main and was closer I would love to have the motor do u need any parts or any thing I just got a new job and if u still have it in a few weeks I will be glad to get it if we cant work out something else

08-12-2005, 02:00 AM	#7
cynergygoon Registered User Join Date: Jun 2005 Location: LEBANON MO Posts: 21	do you still have the engine? is it standard bore, standard crank or has it been bored and the crank turned. i live in lebanon so i could come and pick it up pretty easy i go to columbia quite a bit. let me know i would be interested if its standard.

08-12-2005, 12:42 PM	#8
mike in mo Registered User Join Date: Jul 2005 Location: centralia missouri Posts: 123	yup i still got it. bore well i dont see an oversize stamped on the piston and i have no idea what stock is the oil pan is still on it so i dont know about the crank. ill pull the pan and see about the crank. what is stock bore?

08-12-2005, 03:34 PM	#10
mike in mo Registered User Join Date: Jul 2005 Location: centralia missouri Posts: 123	well its stock bore then. pan still not off so noo word on the crank yet

08-13-2005, 04:49 AM	#11
cynergygoon Registered User Join Date: Jun 2005 Location: LEBANON MO Posts: 21	let me know when you find out what the crank is. im interested in it. pull a rod and a main cap and look on the underside of the bearing for the undersize of the crank. just in case you didnt know. should be something like .010 or .020 something like that thanks.

08-17-2005, 03:17 PM	#12
mike in mo Registered User Join Date: Jul 2005 Location: centralia missouri Posts: 123	ok i got the pan off todayno over size bearings so its standerd too

08-17-2005, 07:11 PM	#13
74 shorty Registered User Join Date: Aug 2005 Location: Bowling Green, Mo Posts: 98	whats the lowest pickup price???



Register or Log In To remove these advertisements.

08-17-2005, 07:34 PM	#14
mike in mo Registered User Join Date: Jul 2005 Location: centralia missouri Posts: 123	$100 is the lowest price now as i seen bare blocks on ebay going for 200 if its not worht 100 ill send it to the iron pile.

08-17-2005, 08:11 PM	#15
74 shorty Registered User Join Date: Aug 2005 Location: Bowling Green, Mo Posts: 98	What is all included, short block or long block, did it run when taken out. Any heads on it??? Sorry if I duplicated a ?

08-17-2005, 09:16 PM	#16
mike in mo Registered User Join Date: Jul 2005 Location: centralia missouri Posts: 123	its block crank pistons rods and balancer it ran but had a noise in the lower end no heads i need them for my other 400.

Register or Log In To remove these advertisements.