???Exhaust Manifolds for 72 c20 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ssjones · 08-08-2005, 03:41 PM

I am going to get my exhaust done by a local shop. They are good in the valley and are recommending the corvette style ram horn exhaust with a center dump on the passenger side. Any suggestions for locating these? Part #'s, etc... This would be for a 350.

Thanks.

tomatocity · 08-08-2005, 06:17 PM

http://www.crateenginedepot.com/stor...1-P619C23.aspx

http://www.1aauto.com/1A/ExhaustMani...EM00168/270046

http://www.1aauto.com/1A/ExhaustMani...EM00169/287615

IA Auto sounds good at $200+. Check and see if the studs and bolts are included.

tomatocity · 08-08-2005, 07:09 PM

http://www.ecklers.com/product.asp?d...VG5X82TCQL9HNE

http://www.ecklers.com/product.asp?d...VG5X82TCQL9HNE

http://www.ecklers.com/dept.asp?dept...VG5X82TCQL9HNE

Here is another source. More expensive but no grinding.

I started a thread about these exhaust manifolds awhile back and I lost all my links (no not a bad harddrive just a stupid user). Can someone point me at the exhaust threads. Thanks.

08-08-2005, 03:41 PM	#1
ssjones Registered User Join Date: Mar 2005 Location: Scottsdale, Arizona Posts: 98	???Exhaust Manifolds for 72 c20 I am going to get my exhaust done by a local shop. They are good in the valley and are recommending the corvette style ram horn exhaust with a center dump on the passenger side. Any suggestions for locating these? Part #'s, etc... This would be for a 350. Thanks. __________________ 1972 Chevy Cheyenne 20 1979 Chevy Camaro 2007 Chevy Avalanche 2005 Mini Cooper

08-08-2005, 06:17 PM	#2
tomatocity Registered User Join Date: Jun 2005 Location: Sacramento CA Posts: 1,255	http://www.crateenginedepot.com/stor...1-P619C23.aspx http://www.1aauto.com/1A/ExhaustMani...EM00168/270046 http://www.1aauto.com/1A/ExhaustMani...EM00169/287615 IA Auto sounds good at $200+. Check and see if the studs and bolts are included. __________________ Got bored, sold everthing. Got bored, looking for a 1960-66 C-10. Want to build my last truck.

08-08-2005, 07:09 PM	#3
tomatocity Registered User Join Date: Jun 2005 Location: Sacramento CA Posts: 1,255	http://www.ecklers.com/product.asp?d...VG5X82TCQL9HNE http://www.ecklers.com/product.asp?d...VG5X82TCQL9HNE http://www.ecklers.com/dept.asp?dept...VG5X82TCQL9HNE Here is another source. More expensive but no grinding. I started a thread about these exhaust manifolds awhile back and I lost all my links (no not a bad harddrive just a stupid user). Can someone point me at the exhaust threads. Thanks. __________________ Got bored, sold everthing. Got bored, looking for a 1960-66 C-10. Want to build my last truck.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.