|
08-18-2002, 08:42 PM
|
#1 |
|
Registered User
Join Date: Feb 2002
Location: Greene, Iowa
Posts: 150
|
tail lights
i've been having problems with my lights in the rear of the truck(tail, brake, turn, reverse, and license plate). it has four wires running to the back of the truck they are spliced about five times, have dead ends, and are very brittle. so i went out and bought some heavy duty trailer wiring to replace the old. i normally have a pretty good grasp on wiring and how it works, but i have never done this before and i need to know what each wire does, where to slice it, which wires to split, and if the ground is seperate and to the bodyor frame. any diagrams or discusion will be greatly appreciated. thanks ahead of time.
__________________
70 3/4 ton 4x4 FOR SALE Greene, IA |
|
|
|
08-18-2002, 09:10 PM
|
#2 |
|
Registered User
 
Join Date: Aug 2001
Location: SOMERSET KY.
Posts: 6,425
|
 I JUST REPLACED THAT HARNESS. I GOT ONE FROM THE TRUCK SHOP IN ORANGE CA. IT WAS $37, & PLUGGED RIGHT IN. THERE # IS 1-800-243-8947. I'M SURE SOME OF THE VENDORS ON THIS BOARD CAN HELP YOU TOO.
__________________
junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE.  THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES//LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST |
|
|
|
|
08-18-2002, 11:07 PM
|
#3 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
|
For $37 you would be way ahead to redo it properly.
I will be the first to admit that I will crawl under and splice a wire, but if they are as bad as you say, you need to replace the harness. my $.02 |
|
|
|
|
08-19-2002, 12:27 AM
|
#4 |
|
Recovering Truck Driver
Join Date: Mar 2002
Location: Orleans, NE USA
Posts: 1,883
|
if you already spent the money on new wires, i'd string the new harness next to the old one, cut each wire one at a time and splice as i go, do the back first, then write down what wire splice into what, if the colors are different, then either cut them ahead or behind the connector at the firewall, depending on how bad the old wires were and hope it all works well.
__________________
67 K-20 350, SM465, Eaton rear, 4.56 no spin option 00 Dodge 2500 4x4, 24V cummins, 5 speed Chad South Central Nebraska |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
