FS- 1 ton dually rolling chassis.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tx Firefighter · 10-24-2005, 07:54 PM

Complete rolling chassis.

It's the 133 inch wheelbase.

Frame is 68 model with all 72 model stuff on it front and rear.

Has fresh disc brakes in front with new calipers and pads. Bearings are all good and repacked with fresh grease. Rotors are good.

Rear end is 4.10 with fresh brakes too, out of a 72. I pulled the center section out and cleaned everything and put it together with fresh lube. It looked fine inside. Drums are good shape too.

All 6 tires are good. Has crappy wheels.

Good SM465 trans and bellhousing with factory crossmember. Full driveline from trans to rear end.

Located in DFW.

Price is 400 bucks.

The good disc brake front and dually rear end is worth the price alone. I was driving this truck around till I pulled the sheetmetal and engine off of it.

qksilver · 10-24-2005, 07:59 PM

How much for the burb?
Thanks,
Steve

mattman002 · 01-11-2006, 11:43 AM

Is the chassis still for sale and do you have any pics? I live about 50 miles west of DFW and I 've been looking for a 1 ton 4x4 frame.

junkyardjohn · 01-11-2006, 12:13 PM

SOUNDS LIKE ONE HELLOFA BARGAIN TO ME. I SURE LIKE DRIVING MY ONE TON. I THINK THE SECRET TO MAKE THEM RIDE NICE IS GOOD SEATS. WHEN I GOT IT IT HAD THE FACTORT BENCH SEAT, & AFTER DRIVING IT 550 MILES HOME, I COULD HARDLY WALK FOR A FEW DAYS. I PUT A SET OF RECOVERED BUCKETS OUT OF A EARLY 80s GRAN CHEROKEE, & NOW IT'S A PLEASURE TO TAKE ROADTRIPS IN. JOHN

blazer72 · 04-05-2007, 12:07 PM

Where did you get your new brake parts at? I have a one-ton dually chassis that needs rebuilt.

10-24-2005, 07:54 PM	#1
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	FS- 1 ton dually rolling chassis.... Complete rolling chassis. It's the 133 inch wheelbase. Frame is 68 model with all 72 model stuff on it front and rear. Has fresh disc brakes in front with new calipers and pads. Bearings are all good and repacked with fresh grease. Rotors are good. Rear end is 4.10 with fresh brakes too, out of a 72. I pulled the center section out and cleaned everything and put it together with fresh lube. It looked fine inside. Drums are good shape too. All 6 tires are good. Has crappy wheels. Good SM465 trans and bellhousing with factory crossmember. Full driveline from trans to rear end. Located in DFW. Price is 400 bucks. The good disc brake front and dually rear end is worth the price alone. I was driving this truck around till I pulled the sheetmetal and engine off of it. __________________ I'm on the Instagram- @Gearhead_Kevin

10-24-2005, 07:59 PM	#2
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: FS- 1 ton dually rolling chassis.... How much for the burb? Thanks, Steve

01-11-2006, 11:43 AM	#3
mattman002 Registered User Join Date: Jul 2005 Location: North Central Texas Posts: 13	Re: FS- 1 ton dually rolling chassis.... Is the chassis still for sale and do you have any pics? I live about 50 miles west of DFW and I 've been looking for a 1 ton 4x4 frame.

01-11-2006, 12:13 PM	#4
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,425	Re: FS- 1 ton dually rolling chassis.... SOUNDS LIKE ONE HELLOFA BARGAIN TO ME. I SURE LIKE DRIVING MY ONE TON. I THINK THE SECRET TO MAKE THEM RIDE NICE IS GOOD SEATS. WHEN I GOT IT IT HAD THE FACTORT BENCH SEAT, & AFTER DRIVING IT 550 MILES HOME, I COULD HARDLY WALK FOR A FEW DAYS. I PUT A SET OF RECOVERED BUCKETS OUT OF A EARLY 80s GRAN CHEROKEE, & NOW IT'S A PLEASURE TO TAKE ROADTRIPS IN. JOHN __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

04-05-2007, 12:07 PM	#5
blazer72 Freedom isn't Free Join Date: Oct 2006 Location: OKC Posts: 393	Re: FS- 1 ton dually rolling chassis.... Where did you get your new brake parts at? I have a one-ton dually chassis that needs rebuilt.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.