WANTED: Cab in Pa/NJ area - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevy lover · 09-05-2005, 09:32 PM

I need a cab for my '82 GMC 4x4 w/sm465-205. My floor is beyond floor panels.

chevy lover · 09-07-2005, 12:43 AM

Ttt

norville · 09-07-2005, 12:59 AM

Did you try harry's u pull it or thepapershop.com?

bob

tgh117 · 09-07-2005, 12:12 PM

I will keep my eyes out, but you might want to check out the penny power. There has been a few parts in there from time to time. There is also a guy on here from Vera Cruz that did have some stuff. Toms 69 conv was his name I think, or something close to that. Here is the thread, you might want to contact him and see if he has anything left. http://67-72chevytrucks.com/vboard/s....php3?t=163208

chevy lover · 09-07-2005, 09:28 PM

thanks

Scotts91Blazer · 09-17-2005, 09:33 PM

I'm contemplating parting my 86 out, has solid floors, but cab corners have started to let go, the old guy I bought it from had steps mounted and drilled thru the corners and that's where it started to rust out, The steps were hiding the rust and before i realized it the corners were shot, but still salvagable. also some surface rust where he drilled thru the rockers for the steps, but nothing major. I'm over in easton,pa about a 1/2 hour from you. I'll know in the next week or so what I'm going to do with it. let me know if your interested.

chevy lover · 09-18-2005, 09:46 AM

just let me know if it can go and when I can take a look.

jc · 09-19-2005, 12:17 PM

i have an 84 complete swb truck the cab has 1 small rust spot in each corner.
im about 1 hr 40 min away.
truck is brown
i will part with cab for $300, comes with-- very solid vinal bench seat,
whole dash, visors, and auto non tilt nice wheel colum.

$75 extra for both doors one is very nice , passengerside is dented at lower front.

$550 for the bed swb very very nice no tailgate excellant floor and driverside
passengerside has a long narrow crease very shallow dent. i did not see any rust on the bed

frame is bent in front
$800 for whole truck minus driverside front fender
comes with 4 rallies

**crossy** · 09-19-2005, 02:32 PM

http://67-72chevytrucks.com/vboard/s...61#post1352761

http://67-72chevytrucks.com/vboard/s....php3?t=168133

jc · 09-19-2005, 09:05 PM

http://67-72chevytrucks.com/vboard/s....php3?t=173599

**crossy** · 11-28-2005, 10:39 AM

mike, did you ever get what you needed here?

chevy lover · 12-01-2005, 08:02 PM

Actually I did not but I found a good auto trans cab near me. good shape and only $200. The only thing I need now is that pesky high trans hump for a456/205 combo.

**crossy** · 12-01-2005, 11:27 PM

and guess who just happens to have one here in front of him that i was just making up the ad for ebay. nice condition. and I mean NICE! $35, DAVE

chevy lover · 12-03-2005, 12:14 PM

Quote:

Originally Posted by crossy

and guess who just happens to have one here in front of him that i was just making up the ad for ebay. nice condition. and I mean NICE! $35, DAVE

not to be a pain or anything but would you have a pick?

**crossy** · 12-03-2005, 01:37 PM

I knew that would get asked . the caulk that is still stuck on ,with red paint still on it, makes it look weird across the rear edge but tunnel is perfect, uncut shape..

chevy lover · 12-05-2005, 07:54 PM

Crossy, I sent you a pm

09-05-2005, 09:32 PM	#1
chevy lover HMMMM Chevy Join Date: Aug 2002 Location: Quakertown, Pa Posts: 203	WANTED: Cab in Pa/NJ area I need a cab for my '82 GMC 4x4 w/sm465-205. My floor is beyond floor panels. __________________ 68 Chevy C10 swb(under construction) 82 GMC K1500 6.2l diesel (daily driver) 77 Chevy K30 frame (only thing left is axles and trans/transfer)______________________________ Mike

09-07-2005, 12:43 AM	#2
chevy lover HMMMM Chevy Join Date: Aug 2002 Location: Quakertown, Pa Posts: 203	Ttt __________________ 68 Chevy C10 swb(under construction) 82 GMC K1500 6.2l diesel (daily driver) 77 Chevy K30 frame (only thing left is axles and trans/transfer)______________________________ Mike

09-07-2005, 12:59 AM	#3
norville Senior Member Join Date: Jun 2004 Location: Mountain Top, Pa Posts: 323	Did you try harry's u pull it or thepapershop.com? bob __________________ 1986 C10 Scottsdale 5.3, TH400

09-07-2005, 12:12 PM	#4
tgh117 Crazy Join Date: Apr 2005 Location: Emmaus, Pa Posts: 203	I will keep my eyes out, but you might want to check out the penny power. There has been a few parts in there from time to time. There is also a guy on here from Vera Cruz that did have some stuff. Toms 69 conv was his name I think, or something close to that. Here is the thread, you might want to contact him and see if he has anything left. http://67-72chevytrucks.com/vboard/s....php3?t=163208 __________________ 77 SB Stepside in a bunch of pieces scattered around the garage.

09-07-2005, 09:28 PM	#5
chevy lover HMMMM Chevy Join Date: Aug 2002 Location: Quakertown, Pa Posts: 203	thanks __________________ 68 Chevy C10 swb(under construction) 82 GMC K1500 6.2l diesel (daily driver) 77 Chevy K30 frame (only thing left is axles and trans/transfer)______________________________ Mike

09-17-2005, 09:33 PM	#6
Scotts91Blazer Registered User Join Date: Jun 2005 Location: Easton,Pa Posts: 26	I'm contemplating parting my 86 out, has solid floors, but cab corners have started to let go, the old guy I bought it from had steps mounted and drilled thru the corners and that's where it started to rust out, The steps were hiding the rust and before i realized it the corners were shot, but still salvagable. also some surface rust where he drilled thru the rockers for the steps, but nothing major. I'm over in easton,pa about a 1/2 hour from you. I'll know in the next week or so what I'm going to do with it. let me know if your interested. __________________ 91 Blazer 350 TBI 86 C10 305 bored .30 over LWB F/S 99 Mustang (my wife thinks I bought it for her) 02 Sentra (my wife's real car) 49 Ford F3 (not running, but a Rat-Rodders dream) 85 Yamaha XJ700 Maxim X

09-18-2005, 09:46 AM	#7
chevy lover HMMMM Chevy Join Date: Aug 2002 Location: Quakertown, Pa Posts: 203	just let me know if it can go and when I can take a look. __________________ 68 Chevy C10 swb(under construction) 82 GMC K1500 6.2l diesel (daily driver) 77 Chevy K30 frame (only thing left is axles and trans/transfer)______________________________ Mike

09-19-2005, 12:17 PM	#8
jc Registered User Join Date: Jan 2001 Location: Jackson, New Jersey Posts: 1,560	i have an 84 complete swb truck the cab has 1 small rust spot in each corner. im about 1 hr 40 min away. truck is brown i will part with cab for $300, comes with-- very solid vinal bench seat, whole dash, visors, and auto non tilt nice wheel colum. $75 extra for both doors one is very nice , passengerside is dented at lower front. $550 for the bed swb very very nice no tailgate excellant floor and driverside passengerside has a long narrow crease very shallow dent. i did not see any rust on the bed frame is bent in front $800 for whole truck minus driverside front fender comes with 4 rallies __________________ 2004 Silverado 2500HD Crewcab 4x4 2000 TOYOTA 4RUNNER 1971 CHEYENNE LWB (THE LOVE SHACK) 1967 c-10 lwb (THE FARMERS DAUGHTER) Last edited by jc; 09-19-2005 at 12:21 PM.

09-19-2005, 02:32 PM	#9
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	http://67-72chevytrucks.com/vboard/s...61#post1352761 http://67-72chevytrucks.com/vboard/s....php3?t=168133 __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

09-19-2005, 09:05 PM	#10
jc Registered User Join Date: Jan 2001 Location: Jackson, New Jersey Posts: 1,560	http://67-72chevytrucks.com/vboard/s....php3?t=173599 __________________ 2004 Silverado 2500HD Crewcab 4x4 2000 TOYOTA 4RUNNER 1971 CHEYENNE LWB (THE LOVE SHACK) 1967 c-10 lwb (THE FARMERS DAUGHTER)

11-28-2005, 10:39 AM	#11
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	Re: WANTED: Cab in Pa/NJ area mike, did you ever get what you needed here? __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

12-01-2005, 08:02 PM	#12
chevy lover HMMMM Chevy Join Date: Aug 2002 Location: Quakertown, Pa Posts: 203	Re: WANTED: Cab in Pa/NJ area Actually I did not but I found a good auto trans cab near me. good shape and only $200. The only thing I need now is that pesky high trans hump for a456/205 combo. __________________ 68 Chevy C10 swb(under construction) 82 GMC K1500 6.2l diesel (daily driver) 77 Chevy K30 frame (only thing left is axles and trans/transfer)______________________________ Mike

12-01-2005, 11:27 PM	#13
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	Re: WANTED: Cab in Pa/NJ area and guess who just happens to have one here in front of him that i was just making up the ad for ebay. nice condition. and I mean NICE! $35, DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

12-03-2005, 01:37 PM	#15
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	Re: WANTED: Cab in Pa/NJ area I knew that would get asked . the caulk that is still stuck on ,with red paint still on it, makes it look weird across the rear edge but tunnel is perfect, uncut shape.. Attached Images __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks. Last edited by crossy; 12-05-2005 at 10:01 PM.

12-05-2005, 07:54 PM	#16
chevy lover HMMMM Chevy Join Date: Aug 2002 Location: Quakertown, Pa Posts: 203	Re: WANTED: Cab in Pa/NJ area Crossy, I sent you a pm __________________ 68 Chevy C10 swb(under construction) 82 GMC K1500 6.2l diesel (daily driver) 77 Chevy K30 frame (only thing left is axles and trans/transfer)______________________________ Mike



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.