Wanted in NorCAL 3/4 ton 4x4 front axle - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**John Fabris** · 12-13-2005, 12:33 AM

Hi All,

Starting to collect parts for the 4x4 burb, and I am looking to conver the 67 front drum brake dana44 axle to a later year front axle. Looking for 71 on up 3x4 ton disc brake front axle with 4:11 gearing. Anyone have any leads in Northern California, please let me know. Local yards are asking for $500 plus..... Pick-N-Pull has them for $200 when you find them...

Livrat · 12-13-2005, 10:54 AM

Hi John,
Found this on Sacramento's craigslist
http://sacramento.craigslist.org/pts/117818823.html

jugernot · 12-13-2005, 03:59 PM

Hey John,

About a month ago I went to a junk yard in Oakley. There was a 67 4x4 that had an exterior fire. From the paint it looked like a really nice truck. I don't know if it was a 3/4 ton axle, but definetly a 4x4. Tri County recyclers 5740 Main Street Oakley 679 8998. If you need some held let me know. I live near by.

**jerry moss** · 12-14-2005, 11:53 PM

John,
the one at tri county is a 3/4 ton,i looked at it a while back too. no idea on gear ratio though. they did have a couple other 3/4 tons out in the back if they didn't crush them. if you call out there, ask for Dave or Steve and say you are a friend of mine, we buy from them quite often at the shop i work in. i also buy from them for myself and they are always fair on their prices-- usually much better than pick-n-pull.

**jerry moss** · 12-15-2005, 12:00 AM

John,
the one at tri county is a 3/4 ton,i looked at it a while back too. no idea on gear ratio though. they did have a couple other 3/4 tons out in the back if they didn't crush them. if you call out there, ask for Dave or Steve and say you are a friend of mine, we buy from them quite often at the shop i work in. i also buy from them for myself and they are always fair on their prices-- usually much better than pick-n-pull.

chevytrux · 12-16-2005, 10:09 PM

If you get tired of looking in pick-n-destroy, I have the axle. Actually have 3 of them. If interested, call Bill @ Vintage Chevy, 510-651-5874 days

**John Fabris** · 12-18-2005, 07:42 PM

Hi Bill,

what is your price on a front disc brake axle with 4:11 ratio?

chevytrux · 12-19-2005, 06:32 PM

I would sell it complete for $400.00. Thanks

Americanrider · 12-20-2005, 02:42 PM

John, I'll suggest that you hunt Craigslist & local classifieds and locate a 73 to early 80's 3/4 project or rust-bucket part out truck. It will have everything you need except brake booster. You could also luck into a newer tranny and NP 205 and single driveline with the right truck. I just swaped in a 75 K20 front axle into my 67... no hunting for steering parts. The power steering box is the same as a 71-72 4x4. I'm also getting the pads/shock mounts re-located on the 14 bolt FF rear so I don't have to hassle with bearing & brake supply issues for a Eatons.

**John Fabris** · 12-22-2005, 07:10 PM

Thanks for the help here!!!

Found a 86 corp 10 bolt with 4:11 including springs, ubolts, and front swaybar for $100....

shoobear · 12-23-2005, 11:28 AM

u have a exta set of front springs? Got a broken leaf in one of my packs.
cheers

12-13-2005, 12:33 AM	#1
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Wanted in NorCAL 3/4 ton 4x4 front axle Hi All, Starting to collect parts for the 4x4 burb, and I am looking to conver the 67 front drum brake dana44 axle to a later year front axle. Looking for 71 on up 3x4 ton disc brake front axle with 4:11 gearing. Anyone have any leads in Northern California, please let me know. Local yards are asking for $500 plus..... Pick-N-Pull has them for $200 when you find them... __________________ John Fabris 67 C10 SWB

12-13-2005, 10:54 AM	#2
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: Wanted in NorCAL 3/4 ton 4x4 front axle Hi John, Found this on Sacramento's craigslist http://sacramento.craigslist.org/pts/117818823.html

12-13-2005, 03:59 PM	#3
jugernot Life, Be In It..... Join Date: Oct 2003 Location: Novato, California Posts: 1,498	Re: Wanted in NorCAL 3/4 ton 4x4 front axle Hey John, About a month ago I went to a junk yard in Oakley. There was a 67 4x4 that had an exterior fire. From the paint it looked like a really nice truck. I don't know if it was a 3/4 ton axle, but definetly a 4x4. Tri County recyclers 5740 Main Street Oakley 679 8998. If you need some held let me know. I live near by. __________________ Project Name: LEMON DROP. Reconstruction started "December 2000". Projected completion date "Who knows" http://67-72chevytrucks.com/vboard/s...d.php?t=200082

12-14-2005, 11:53 PM	#4
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,949	Re: Wanted in NorCAL 3/4 ton 4x4 front axle John, the one at tri county is a 3/4 ton,i looked at it a while back too. no idea on gear ratio though. they did have a couple other 3/4 tons out in the back if they didn't crush them. if you call out there, ask for Dave or Steve and say you are a friend of mine, we buy from them quite often at the shop i work in. i also buy from them for myself and they are always fair on their prices-- usually much better than pick-n-pull. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

12-15-2005, 12:00 AM	#5
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,949	Re: Wanted in NorCAL 3/4 ton 4x4 front axle John, the one at tri county is a 3/4 ton,i looked at it a while back too. no idea on gear ratio though. they did have a couple other 3/4 tons out in the back if they didn't crush them. if you call out there, ask for Dave or Steve and say you are a friend of mine, we buy from them quite often at the shop i work in. i also buy from them for myself and they are always fair on their prices-- usually much better than pick-n-pull. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

12-16-2005, 10:09 PM	#6
chevytrux Registered User Join Date: Jul 2002 Location: Fremont, Ca. Posts: 26	Re: Wanted in NorCAL 3/4 ton 4x4 front axle If you get tired of looking in pick-n-destroy, I have the axle. Actually have 3 of them. If interested, call Bill @ Vintage Chevy, 510-651-5874 days

12-18-2005, 07:42 PM	#7
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Re: Wanted in NorCAL 3/4 ton 4x4 front axle Hi Bill, what is your price on a front disc brake axle with 4:11 ratio? __________________ John Fabris 67 C10 SWB

12-19-2005, 06:32 PM	#8
chevytrux Registered User Join Date: Jul 2002 Location: Fremont, Ca. Posts: 26	Re: Wanted in NorCAL 3/4 ton 4x4 front axle I would sell it complete for $400.00. Thanks

12-20-2005, 02:42 PM	#9
Americanrider Registered User Join Date: Dec 2004 Location: NW, WA. Posts: 1,421	Re: Wanted in NorCAL 3/4 ton 4x4 front axle John, I'll suggest that you hunt Craigslist & local classifieds and locate a 73 to early 80's 3/4 project or rust-bucket part out truck. It will have everything you need except brake booster. You could also luck into a newer tranny and NP 205 and single driveline with the right truck. I just swaped in a 75 K20 front axle into my 67... no hunting for steering parts. The power steering box is the same as a 71-72 4x4. I'm also getting the pads/shock mounts re-located on the 14 bolt FF rear so I don't have to hassle with bearing & brake supply issues for a Eatons.

12-22-2005, 07:10 PM	#10
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Re: Wanted in NorCAL 3/4 ton 4x4 front axle Thanks for the help here!!! Found a 86 corp 10 bolt with 4:11 including springs, ubolts, and front swaybar for $100.... __________________ John Fabris 67 C10 SWB

12-23-2005, 11:28 AM	#11
shoobear Registered User Join Date: Nov 2005 Location: Kaslo,BC Posts: 56	Re: Wanted in NorCAL 3/4 ton 4x4 front axle u have a exta set of front springs? Got a broken leaf in one of my packs. cheers __________________ I will run u over for FREE!!! 2001 F350 6" Lifted Dually 1970 ScoutII with chevy implants 1970 GMC 3/4 LB 4x4 (for sale) 1972 Chevy 3/4 LB 4x4 -project



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.