3/4 ton wheels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Canadian72GMC · 01-31-2006, 02:38 AM

Does anyone know if any of the aluminum wheels off of the newer GM trucks will fit my 76 3/4 ton crew?

longhorn71 · 01-31-2006, 03:23 AM

the wheel bolt pattern is the same.I know the wheel off set tucks the tires in more on a 67-72 truck but not sure on the newer ones

**special-K** · 01-31-2006, 07:12 AM

Das right.I`ve seen them and they look fine.You`r not going to get a wide stance look out of them.

3qtrtontarrer · 01-31-2006, 07:16 AM

most 8 lug wheels are the same, just different backspacing. i have new HUMMER WHEELS ON MY 70 3/4

Scrubby · 01-31-2006, 12:53 PM

I have them on my 71 burb.

You need conversion lug nuts to run the center caps. More info here:

http://www.gmtrucks.org/wiki/faq/8_lug_wheels

Eyegore · 01-31-2006, 02:03 PM

My son has the newer ones shown above by scrubby on his 78 camper special

TexasJeff · 02-03-2006, 01:54 PM

I have the newer wheels on my truck, the only thing you need is to buy the lug nuts to use the center caps.

MylilBowTie · 02-03-2006, 03:17 PM

I know I probably asked this before but do your tire rub TexasJeff? Did you install new coil springs or anything in the front? Is your truck a heavy (beefier) 3/4?

Canadian72GMC · 02-03-2006, 10:38 PM

thanks for the responses. Where did you get them and what did you pay if you don't mind me asking?

TexasJeff · 02-07-2006, 09:11 AM

My tires don't rub at all, wheel lock to lock no problems. My truck is a standard 3/4 ton with just over 100,000 miles and the only thing I have done to the front end is put new shocks on it and change out the steering box, other than that it is all stock GM. The tires are LT285-75R16. I got wheels from a tire and wheel shop here in the Houston area, I paid $100 a wheel with the center caps, bought the lug nuts off e-bay for $40 from ez accessories, sorry about the slow response, been busy with work.

Russell · 02-07-2006, 07:28 PM

I've got a set of the steel wheels on my 3/4 ton 4x4 (actually, less the frame and front diff, she is all 1 ton equipped, so its a bit taller than the average 3/4 ton) and they fit real good

Just need some bigger meat for her, she has 31s at the moment, but could definitely use a set of 33s

MylilBowTie · 02-08-2006, 03:13 PM

Those 285-75-16s are 33in tall thats why I was asking. Are the Control arms different for a 3/4 ton and 1 ton?

Russell · 02-08-2006, 03:49 PM

My truck is a 4x4, so I'm not sure, but I imagine that 1 ton control arms are different. The frame rails on a 1 ton are different for sure, much beefier.

01-31-2006, 02:38 AM	#1
Canadian72GMC Registered User Join Date: Mar 2005 Location: north battleford, sk Posts: 30	3/4 ton wheels Does anyone know if any of the aluminum wheels off of the newer GM trucks will fit my 76 3/4 ton crew?

01-31-2006, 03:23 AM	#2
longhorn71 Senior Member Join Date: Sep 2004 Location: CANADA Posts: 1,681	Re: 3/4 ton wheels the wheel bolt pattern is the same.I know the wheel off set tucks the tires in more on a 67-72 truck but not sure on the newer ones

01-31-2006, 07:12 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 3/4 ton wheels Das right.I`ve seen them and they look fine.You`r not going to get a wide stance look out of them. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-31-2006, 07:16 AM	#4
3qtrtontarrer Registered User Join Date: Oct 2005 Location: NH Posts: 93	Re: 3/4 ton wheels most 8 lug wheels are the same, just different backspacing. i have new HUMMER WHEELS ON MY 70 3/4

01-31-2006, 12:53 PM	#5
Scrubby Check out GMTrucks.org Join Date: Sep 2003 Location: Boise, Id Posts: 284	Re: 3/4 ton wheels I have them on my 71 burb. You need conversion lug nuts to run the center caps. More info here: http://www.gmtrucks.org/wiki/faq/8_lug_wheels

01-31-2006, 02:03 PM	#6
Eyegore What Hump? Join Date: Apr 2003 Location: New River AZ Posts: 2,009	Re: 3/4 ton wheels My son has the newer ones shown above by scrubby on his 78 camper special __________________ Lil red 86 c-10 99 Sub 78 Camper Special w/ 454

02-03-2006, 01:54 PM	#7
TexasJeff Don't Crush em Restore em Join Date: Aug 2004 Location: Pinehurst, Texas Posts: 764	Re: 3/4 ton wheels I have the newer wheels on my truck, the only thing you need is to buy the lug nuts to use the center caps. __________________ TexasJeff 2009 Silver with Linen Interior Cadillac DTS 1990 Red with White Top and Interior Ford Mustang GT convertible 1998 Red with Gray Interior, C3500 Chevy Crew Cab Dually

02-03-2006, 03:17 PM	#8
MylilBowTie Right turn Clyde Join Date: Nov 2002 Location: Cincinnati, Ohio Posts: 2,911	Re: 3/4 ton wheels I know I probably asked this before but do your tire rub TexasJeff? Did you install new coil springs or anything in the front? Is your truck a heavy (beefier) 3/4? __________________ 1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73 1992 Camaro RS 305 TBI

02-03-2006, 10:38 PM	#9
Canadian72GMC Registered User Join Date: Mar 2005 Location: north battleford, sk Posts: 30	Re: 3/4 ton wheels thanks for the responses. Where did you get them and what did you pay if you don't mind me asking?

02-07-2006, 09:11 AM	#10
TexasJeff Don't Crush em Restore em Join Date: Aug 2004 Location: Pinehurst, Texas Posts: 764	Re: 3/4 ton wheels My tires don't rub at all, wheel lock to lock no problems. My truck is a standard 3/4 ton with just over 100,000 miles and the only thing I have done to the front end is put new shocks on it and change out the steering box, other than that it is all stock GM. The tires are LT285-75R16. I got wheels from a tire and wheel shop here in the Houston area, I paid $100 a wheel with the center caps, bought the lug nuts off e-bay for $40 from ez accessories, sorry about the slow response, been busy with work. __________________ TexasJeff 2009 Silver with Linen Interior Cadillac DTS 1990 Red with White Top and Interior Ford Mustang GT convertible 1998 Red with Gray Interior, C3500 Chevy Crew Cab Dually Last edited by TexasJeff; 02-07-2006 at 09:15 AM.

02-07-2006, 07:28 PM	#11
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Re: 3/4 ton wheels I've got a set of the steel wheels on my 3/4 ton 4x4 (actually, less the frame and front diff, she is all 1 ton equipped, so its a bit taller than the average 3/4 ton) and they fit real good Just need some bigger meat for her, she has 31s at the moment, but could definitely use a set of 33s __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

02-08-2006, 03:13 PM	#12
MylilBowTie Right turn Clyde Join Date: Nov 2002 Location: Cincinnati, Ohio Posts: 2,911	Re: 3/4 ton wheels Those 285-75-16s are 33in tall thats why I was asking. Are the Control arms different for a 3/4 ton and 1 ton? __________________ 1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73 1992 Camaro RS 305 TBI

02-08-2006, 03:49 PM	#13
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Re: 3/4 ton wheels My truck is a 4x4, so I'm not sure, but I imagine that 1 ton control arms are different. The frame rails on a 1 ton are different for sure, much beefier. __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.