tranny transfer case and rear ID - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67ChevyC10Stepside · 06-06-2006, 04:06 AM

k...first we have a 1ton crew cab dually....it has a iron transfer case with 2 lo 2 hi neutral 4 lo 4 hi....i've never seen one like that...on the back of it the input shaft looks different than the other ones we have...i have a pic of it and a pic of the other iron one....next....our 87 we got had a 4 speed in it with the 4th being overdrive....i've never seen another like it what is it?....then lastly what are these rearends?

67ChevyC10Stepside · 06-06-2006, 04:07 AM

hmm...it says my pics have to be below 100 KB? how do i make them that small?

Jonboy · 06-06-2006, 08:37 AM

What year is the truck? It sounds like a 205 to me. There "should" be an ID tag on the backside of the case.

67ChevyC10Stepside · 06-06-2006, 09:44 AM

79 for the one ton but we have 2 iron ones...that look the same....but one splits 2 wheel drive and one doesn't....

BigDan3131 · 06-06-2006, 03:34 PM

The rearends are either GM 14 bolt or Dana 60-70s

Jonboy · 06-06-2006, 03:56 PM

the full time case is most likely a 203. The pattern from the top is hi Loc, hi, N, low, low loc for a 203. I am not sure what visual clues to look for; I usually look at the shift pattern to try to get close. The 203 case is cast iron, chain drive. The 205 is cast iron, gear drive. The 208 and 241 cases are aluminum, chain drive. I think the input will be different depending on auto or stick applications.

Slonaker · 06-06-2006, 05:16 PM

Quote:

Originally Posted by 67ChevyC10Stepside

hmm...it says my pics have to be below 100 KB? how do i make them that small?

Assuming you are not a Mac user, you can use Microsoft Paint. Even better than that is Irfanview, an excellent free image utility available at www.irfanview.com.

Slonaker

67ChevyC10Stepside · 06-06-2006, 05:16 PM

yeah that's how it is....hi loc hi n low low loc.....it's in a 79 1 ton crew cab dually with a 350 TH400 and dont know the rest....i have pictures of all this if i could just figure out how to post them isnt a dana 60 axle really valuable? how do i identify it?

67ChevyC10Stepside · 06-06-2006, 08:47 PM

i have irfanview but how do i choose image size in KB?

67ChevyC10Stepside · 06-07-2006, 02:13 AM

so how do i ID them? and what kind of tranny is the 4 speed with 4th being overdrive?

67ChevyC10Stepside · 06-07-2006, 03:20 AM

from what im gathering of this overdrive transmission is...it was made by chrysler corporation..it's based on the a-833 transmission in the hemi cars...shares the dimensions of a muncie and has a my6 code....anyone else know anything?

67ChevyC10Stepside · 06-08-2006, 03:29 AM

noone?

67ChevyC10Stepside · 06-08-2006, 10:56 PM

you guys are really good at this

79BIG10 · 06-08-2006, 11:48 PM

Not sure on the tranny but here's a link to ID your axle. http://coloradok5.com/axleguide.shtml

magnethead · 06-09-2006, 12:05 AM

use http://www.photobucket.com .

a 4x4 dually will have a dana 60 front and either corp 14 bolt or dana 70 rear.

if 2WD is plit i/Lo, it's a 203 i think. If it's only 2WD hi, it's a 205.

as far as transmission, what does the pan look like? (again, picture....)

pumpkin · 06-09-2006, 01:09 AM

No pics? Most likely its a 205 t case, with a 14 bolt rear end.

pumpkin · 06-09-2006, 01:16 AM

Where I am, d60's rears go to the scrapyard, d60 fronts are $1000. and up.

67ChevyC10Stepside · 06-09-2006, 10:30 AM

i cant figure out how to get the pictures below 100KB....i have pics of everything just cant figure out how to post them

06-06-2006, 04:06 AM	#1
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	tranny transfer case and rear ID k...first we have a 1ton crew cab dually....it has a iron transfer case with 2 lo 2 hi neutral 4 lo 4 hi....i've never seen one like that...on the back of it the input shaft looks different than the other ones we have...i have a pic of it and a pic of the other iron one....next....our 87 we got had a 4 speed in it with the 4th being overdrive....i've never seen another like it what is it?....then lastly what are these rearends? __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

06-06-2006, 04:07 AM	#2
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	Re: tranny transfer case and rear ID hmm...it says my pics have to be below 100 KB? how do i make them that small? __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

06-06-2006, 08:37 AM	#3
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: tranny transfer case and rear ID What year is the truck? It sounds like a 205 to me. There "should" be an ID tag on the backside of the case. __________________ 1974 Jimmy- 5.3/4L80e/NP241

06-06-2006, 09:44 AM	#4
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	Re: tranny transfer case and rear ID 79 for the one ton but we have 2 iron ones...that look the same....but one splits 2 wheel drive and one doesn't.... __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

06-06-2006, 03:34 PM	#5
BigDan3131 Registered User Join Date: Jun 2006 Location: Maple Valley, WA Posts: 1,913	Re: tranny transfer case and rear ID The rearends are either GM 14 bolt or Dana 60-70s

06-06-2006, 03:56 PM	#6
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: tranny transfer case and rear ID the full time case is most likely a 203. The pattern from the top is hi Loc, hi, N, low, low loc for a 203. I am not sure what visual clues to look for; I usually look at the shift pattern to try to get close. The 203 case is cast iron, chain drive. The 205 is cast iron, gear drive. The 208 and 241 cases are aluminum, chain drive. I think the input will be different depending on auto or stick applications. __________________ 1974 Jimmy- 5.3/4L80e/NP241

06-06-2006, 05:16 PM	#8
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	Re: tranny transfer case and rear ID yeah that's how it is....hi loc hi n low low loc.....it's in a 79 1 ton crew cab dually with a 350 TH400 and dont know the rest....i have pictures of all this if i could just figure out how to post them isnt a dana 60 axle really valuable? how do i identify it? __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

06-06-2006, 08:47 PM	#9
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	Re: tranny transfer case and rear ID i have irfanview but how do i choose image size in KB? __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

06-07-2006, 02:13 AM	#10
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	Re: tranny transfer case and rear ID so how do i ID them? and what kind of tranny is the 4 speed with 4th being overdrive? __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

06-07-2006, 03:20 AM	#11
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	Re: tranny transfer case and rear ID from what im gathering of this overdrive transmission is...it was made by chrysler corporation..it's based on the a-833 transmission in the hemi cars...shares the dimensions of a muncie and has a my6 code....anyone else know anything? __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

06-08-2006, 03:29 AM	#12
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	Re: tranny transfer case and rear ID noone? __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

06-08-2006, 10:56 PM	#13
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	Re: tranny transfer case and rear ID you guys are really good at this __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

06-08-2006, 11:48 PM	#14
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	Re: tranny transfer case and rear ID Not sure on the tranny but here's a link to ID your axle. http://coloradok5.com/axleguide.shtml __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

06-09-2006, 12:05 AM	#15
magnethead 7000 #'s of american IRON Join Date: Dec 2004 Location: north tx Posts: 883	Re: tranny transfer case and rear ID use http://www.photobucket.com . a 4x4 dually will have a dana 60 front and either corp 14 bolt or dana 70 rear. if 2WD is plit i/Lo, it's a 203 i think. If it's only 2WD hi, it's a 205. as far as transmission, what does the pan look like? (again, picture....)

06-09-2006, 01:09 AM	#16
pumpkin Registered User Join Date: Apr 2006 Location: East Sooke B.C. Canada Posts: 543	Re: tranny transfer case and rear ID No pics? Most likely its a 205 t case, with a 14 bolt rear end.



Register or Log In To remove these advertisements.

06-09-2006, 01:16 AM	#17
pumpkin Registered User Join Date: Apr 2006 Location: East Sooke B.C. Canada Posts: 543	Re: tranny transfer case and rear ID Where I am, d60's rears go to the scrapyard, d60 fronts are $1000. and up.

06-09-2006, 10:30 AM	#18
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	Re: tranny transfer case and rear ID i cant figure out how to get the pictures below 100KB....i have pics of everything just cant figure out how to post them __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

Register or Log In To remove these advertisements.