Some Stuff I Am Taking Off The 72 Gmc F/s - The 1947 - Present Chevrolet & GMC Truck Message Board Network

billsbowtie · 06-06-2006, 10:07 PM

gauge dash bezel driver shape $25.00

billsbowtie · 06-06-2006, 10:08 PM

pic. 2 of dash bezel.

billsbowtie · 06-06-2006, 10:11 PM

sunpro gauges water temp,and oil press. looks like everything is there it was hooked up when eng. was removed driver shape $20.00 shipped for both.

billsbowtie · 06-06-2006, 10:12 PM

a no name tack $20.00 shipped in the u.s.

billsbowtie · 06-06-2006, 10:14 PM

cig. lighter has some over spray on it $10.00 shipped.

billsbowtie · 06-06-2006, 10:15 PM

heater control fair shape has 1 broke leaver $15.00 plus ride.

billsbowtie · 06-06-2006, 10:16 PM

pic.2 of heater control.

billsbowtie · 06-06-2006, 10:17 PM

brake booster with brackets working right now $50.00 plus ride.

billsbowtie · 06-06-2006, 10:18 PM

pic.2 of booster/brackets.

chevdanbarnett · 06-06-2006, 10:41 PM

hay bill let me know how the inwells are ok when you get thet far thanks dan

billsbowtie · 06-06-2006, 10:46 PM

dan are you talking about the ft. inner fenders ? if so the drivers side looks good but want no for sure till i take it off. the pass. side is bad.

chevdanbarnett · 06-06-2006, 11:12 PM

yes the front inwells ok let me know thanks dan

**jaros44sr** · 06-07-2006, 06:56 AM

Hey Bill, Do you have a cross support panel, radiator support? I am looking to buy a new one, but thought I'd check out used ones first!! Thanks Jim

c-1072 · 06-07-2006, 12:41 PM

hey if you want to seperate the proportioning valve let me know . also i need a good 72 chevy steering wheel .

billsbowtie · 06-07-2006, 04:07 PM

jaros44 is this the cross suport you are looking for ? the rad. suport is bad.
c-1072 i have proportion vavles 2wd and 4wd $20.00 shipped to you.

farmtruckIII · 06-07-2006, 04:17 PM

Any eyebrows?

billsbowtie · 06-07-2006, 04:27 PM

I Haven't Found Any EYEBROWS Yet.

**jaros44sr** · 06-07-2006, 06:35 PM

Quote:

Originally Posted by billsbowtie

jaros44 is this the cross suport you are looking for ? the rad. suport is bad.
c-1072 i have proportion vavles 2wd and 4wd $20.00 shipped to you.

No, I was looking for the Rad. Support. I guess its bad.

Sgt.Booya · 06-07-2006, 09:17 PM

Hi, I'll take the power brake booster, bracket, master cly and prop value. I'll also need the longer rod as I'm converting from standard to power brakes. Can you give me a quote with shipping to 14304 please?

70Chevy4x4Nut · 06-07-2006, 09:52 PM

Hey Bill, will you be selling any parts from the bed? I'm looking for the rear wheel housings, particularly the passenger side but would take both if the price is right and they are in good shape. Let me know

Thanks

billsbowtie · 06-07-2006, 10:21 PM

sgt.booya i will send you a pm.
70chevy4*4nut i will be saleing the bed whole.

c-1072 · 06-08-2006, 11:55 AM

I need a 4x4 w/power disk brakes pm me a paypal adress and i will par tonight . I could use this asap so i would greatly appreciate a quick shipment of the part .
Thanks a lot
Todd

billsbowtie · 06-08-2006, 12:33 PM

c-1072 what part are you needing a proportion valve if so i have 1 for a 72 4wd with dis brakes.

badpeanut · 06-08-2006, 08:45 PM

Any exhaust hangers that look like this?

billsbowtie · 06-08-2006, 10:23 PM

badpeanut i will check.

06-06-2006, 10:07 PM	#1
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Some Stuff I Am Taking Off The 72 Gmc F/s gauge dash bezel driver shape $25.00

06-06-2006, 10:08 PM	#2
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: Some Stuff I Am Taking Off The 72 Gmc F/s pic. 2 of dash bezel.

06-06-2006, 10:11 PM	#3
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: Some Stuff I Am Taking Off The 72 Gmc F/s sunpro gauges water temp,and oil press. looks like everything is there it was hooked up when eng. was removed driver shape $20.00 shipped for both.

06-06-2006, 10:12 PM	#4
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: Some Stuff I Am Taking Off The 72 Gmc F/s a no name tack $20.00 shipped in the u.s.

06-06-2006, 10:14 PM	#5
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: Some Stuff I Am Taking Off The 72 Gmc F/s cig. lighter has some over spray on it $10.00 shipped.

06-06-2006, 10:15 PM	#6
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: Some Stuff I Am Taking Off The 72 Gmc F/s heater control fair shape has 1 broke leaver $15.00 plus ride.

06-06-2006, 10:16 PM	#7
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: Some Stuff I Am Taking Off The 72 Gmc F/s pic.2 of heater control.

06-06-2006, 10:17 PM	#8
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: Some Stuff I Am Taking Off The 72 Gmc F/s brake booster with brackets working right now $50.00 plus ride.

06-06-2006, 10:18 PM	#9
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: Some Stuff I Am Taking Off The 72 Gmc F/s pic.2 of booster/brackets.

06-06-2006, 10:41 PM	#10
chevdanbarnett Senior Member Join Date: Apr 2006 Location: ohio medina Posts: 451	Re: Some Stuff I Am Taking Off The 72 Gmc F/s hay bill let me know how the inwells are ok when you get thet far thanks dan

06-06-2006, 10:46 PM	#11
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: Some Stuff I Am Taking Off The 72 Gmc F/s dan are you talking about the ft. inner fenders ? if so the drivers side looks good but want no for sure till i take it off. the pass. side is bad.

06-06-2006, 11:12 PM	#12
chevdanbarnett Senior Member Join Date: Apr 2006 Location: ohio medina Posts: 451	Re: Some Stuff I Am Taking Off The 72 Gmc F/s yes the front inwells ok let me know thanks dan

06-07-2006, 06:56 AM	#13
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,785	Re: Some Stuff I Am Taking Off The 72 Gmc F/s Hey Bill, Do you have a cross support panel, radiator support? I am looking to buy a new one, but thought I'd check out used ones first!! Thanks Jim

06-07-2006, 12:41 PM	#14
c-1072 Registered User Join Date: Sep 2004 Location: rochester NY Posts: 777	Re: Some Stuff I Am Taking Off The 72 Gmc F/s hey if you want to seperate the proportioning valve let me know . also i need a good 72 chevy steering wheel .

06-07-2006, 04:07 PM	#15
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: Some Stuff I Am Taking Off The 72 Gmc F/s jaros44 is this the cross suport you are looking for ? the rad. suport is bad. c-1072 i have proportion vavles 2wd and 4wd $20.00 shipped to you.



Register or Log In To remove these advertisements.

06-07-2006, 04:17 PM	#16
farmtruckIII 71 GMC 454/TH400 Join Date: Dec 2005 Location: Blue Mound TX Posts: 214	Re: Some Stuff I Am Taking Off The 72 Gmc F/s Any eyebrows? __________________ "The bigger you are the harder you fall, the farther you walk the longer you crawl."

06-07-2006, 04:27 PM	#17
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: Some Stuff I Am Taking Off The 72 Gmc F/s I Haven't Found Any EYEBROWS Yet. Last edited by billsbowtie; 06-07-2006 at 04:28 PM.

06-07-2006, 09:17 PM	#19
Sgt.Booya Registered User Join Date: Apr 2006 Location: Ontario, Canada Posts: 75	Re: Some Stuff I Am Taking Off The 72 Gmc F/s Hi, I'll take the power brake booster, bracket, master cly and prop value. I'll also need the longer rod as I'm converting from standard to power brakes. Can you give me a quote with shipping to 14304 please? __________________ If you keep and open mind you never know what might drop in. 1970 Chev C10 SWB, "250 turbo thrift"

06-07-2006, 09:52 PM	#20
70Chevy4x4Nut Registered User Join Date: Dec 2002 Location: TX Posts: 311	Re: Some Stuff I Am Taking Off The 72 Gmc F/s Hey Bill, will you be selling any parts from the bed? I'm looking for the rear wheel housings, particularly the passenger side but would take both if the price is right and they are in good shape. Let me know Thanks

06-07-2006, 10:21 PM	#21
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: Some Stuff I Am Taking Off The 72 Gmc F/s sgt.booya i will send you a pm. 70chevy4*4nut i will be saleing the bed whole.

06-08-2006, 11:55 AM	#22
c-1072 Registered User Join Date: Sep 2004 Location: rochester NY Posts: 777	Re: Some Stuff I Am Taking Off The 72 Gmc F/s I need a 4x4 w/power disk brakes pm me a paypal adress and i will par tonight . I could use this asap so i would greatly appreciate a quick shipment of the part . Thanks a lot Todd

06-08-2006, 12:33 PM	#23
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: Some Stuff I Am Taking Off The 72 Gmc F/s c-1072 what part are you needing a proportion valve if so i have 1 for a 72 4wd with dis brakes.

06-08-2006, 08:45 PM	#24
badpeanut Not a bad nut after all.. Join Date: Dec 2000 Location: ND Posts: 1,759	Re: Some Stuff I Am Taking Off The 72 Gmc F/s Any exhaust hangers that look like this? Attached Images __________________ '05 Chevy 2500HD 4x4 '72 GMC LWB 4x2 driver '72 Chevy LWB 4x4 plow truck '71 Blazer 4x4 driver '70 GMC LWB trailer

06-08-2006, 10:23 PM	#25
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: Some Stuff I Am Taking Off The 72 Gmc F/s badpeanut i will check.

Register or Log In To remove these advertisements.