The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-15-2006, 08:35 AM   #1
buds56
Registered User
 
buds56's Avatar
 
Join Date: Jun 2006
Location: virginia
Posts: 100
6 or 12 volts

Hello i'm new to the forum,i just got a 56 3/4 ton that was completly disassembled and as i'm going through the parts the cluster still has the wiring attached to it with the ignition switch. it came w/o a motor or trans,but the switch doesn't have a start detent it just seems to be on or off.i figure i can just get a 56 car switch and run an extra wire.my ? is are these trucks 6 or 12 volts as i'd like to use the original gas gauge and don't want to ruin any thing. this is going to be a big project and the wiring is a long way off but i'm curious.hopefully some pics will follow as it progresses thanks ,bud
buds56 is offline   Reply With Quote
Old 07-15-2006, 09:46 AM   #2
5Mike7
Senior Member
 
Join Date: Apr 2005
Location: Oakdale,Ca
Posts: 283
Re: 6 or 12 volts

12 volts. The truck had a floor push starter in it originally. The only way to use that switch with a modern starter, would be to wire to a push button switch, then to the solenoid.

Good luck, and welcome aboard!

Last edited by 5Mike7; 07-15-2006 at 09:47 AM.
5Mike7 is offline   Reply With Quote
Old 07-15-2006, 09:48 AM   #3
dwcsr
Hollister Road Co.
 
dwcsr's Avatar
 
Join Date: Apr 2005
Location: Houston
Posts: 6,131
Re: 6 or 12 volts

Welcome to the board.

Its 12 volt with a pedal starter the switch is on, off, and maybe acc. push the pedal to start. You can get a key switch for the starter on what ever engine you get. I used the original gages in my 58 and you can still get replacements for the ones that are broken. keep us updated
dwcsr is offline   Reply With Quote
Old 07-15-2006, 02:51 PM   #4
Igotachevyor2
Apache Club
 
Igotachevyor2's Avatar
 
Join Date: Jan 2006
Location: Goodlettsville,Tn.
Posts: 1,294
Re: 6 or 12 volts

welcome to the board throw some pics up when you can
__________________
58 CHEVY APACHE I 74 CHEVY C-10 I 78 K-10 donor truck I 89 SONOMA
My Trucks Apache Sitting Idle MySpace
Project Dad's Truck (74 C-10 to K-10 conversion)
Igotachevyor2 is offline   Reply With Quote
Old 07-15-2006, 04:48 PM   #5
CAL 58 GMC
Senior Member
 
CAL 58 GMC's Avatar
 
Join Date: Jun 2005
Location: Clovis Ca.
Posts: 3,311
Re: 6 or 12 volts

You can buy a new switch from any of the after market venders like, Bothers Trucks or LMC.
CAL 58 GMC is offline   Reply With Quote
Old 07-16-2006, 03:13 PM   #6
buds56
Registered User
 
buds56's Avatar
 
Join Date: Jun 2006
Location: virginia
Posts: 100
Re: 6 or 12 volts

thanks, here's a pic of the tk and the donor tk
Attached Images
  
buds56 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:00 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com