89,86burb & 84blazer for parts - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

alf4444 · 08-08-2006, 11:07 PM

I'll pass I have a deal pending with another member

**BOSS** · 08-10-2006, 02:03 PM

here is some dash pics.let me know if you still want it.And guys if i am to high on prices you can allways offer less and see if i take it..lol.

Eyegore · 08-10-2006, 02:14 PM

Boss i'm looking for the wiring harness for the power windows from the fuse box to the doors -motor to switches and switches, do you have this? It will be for my 86 c10. Also what about the power door locks, do yuo have them also?

**BOSS** · 08-10-2006, 02:34 PM

Eyegore on the 86 i know the windows worked but they were very slow in the front,back seemed to work good and the locks didnt work.I think everything works in the 89 but i am not sure they are the same.

Eyegore · 08-10-2006, 03:34 PM

I don't need the motors or window regulators just the wiring harness for the power windows & door locks, I'm installing power windows and door locks, I already have the motors and requlators but now I need the wiring harness and I would like to install power locks.

**BOSS** · 08-10-2006, 03:53 PM

How about $20 for the wiring and the switches and i will check out both and see which one is in better shape?Plus shipping which shouldnt be much?

Eyegore · 08-10-2006, 04:03 PM

Great, what about the power door locks?

**BOSS** · 08-10-2006, 04:07 PM

how about another $5 for the wiring and switches for those?seeing they would be in the same box.

Eyegore · 08-10-2006, 04:11 PM

Great that will do, can I PM you for specifics?

**BOSS** · 08-10-2006, 04:12 PM

sure

rich-white · 08-11-2006, 10:11 PM

Boss; Do you still have the 4" lift and does it have the steering arm? Would be interested w/o rear springs just blocks and u-bolts and complete front end lift componets.

**BOSS** · 08-12-2006, 04:16 PM

rich-white = it doesnt have a lowered steering arm on it.let me know if you would still be interested ok.

rich-white · 08-12-2006, 07:32 PM

Still interested.. see if it has the the raised steering that goes on the axle usually used on 4" and over kits. Looks like a horseshoe just bent.

rich-white · 08-12-2006, 07:34 PM

or if you have a pic of the axle where the rear of the drag lik mounts would be good too.

wildmanaaron · 08-13-2006, 11:35 PM

Can you tell me if you have any 81-91 Silverado style door panels. Also looking for a set of the factory kickpanels for A/C Trucks.

What all do you have left from the Blazer?? Pics would be appreciated of it.

Thanks!

**BOSS** · 08-14-2006, 07:51 AM

I will try to get more pics taken today.really dont want to split up the lift though

08-08-2006, 11:07 PM	#51
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	Re: 89,86burb & 84blazer for parts I'll pass I have a deal pending with another member __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

08-10-2006, 02:03 PM	#52
BOSS Just here to help Join Date: Jan 2002 Location: Norwood,Mo Posts: 3,890	Re: 89,86burb & 84blazer for parts here is some dash pics.let me know if you still want it.And guys if i am to high on prices you can allways offer less and see if i take it..lol. Attached Images __________________ Support our site Norwood Survivor

08-10-2006, 02:14 PM	#53
Eyegore What Hump? Join Date: Apr 2003 Location: New River AZ Posts: 2,009	Re: 89,86burb & 84blazer for parts Boss i'm looking for the wiring harness for the power windows from the fuse box to the doors -motor to switches and switches, do you have this? It will be for my 86 c10. Also what about the power door locks, do yuo have them also? __________________ Lil red 86 c-10 99 Sub 78 Camper Special w/ 454

08-10-2006, 02:34 PM	#54
BOSS Just here to help Join Date: Jan 2002 Location: Norwood,Mo Posts: 3,890	Re: 89,86burb & 84blazer for parts Eyegore on the 86 i know the windows worked but they were very slow in the front,back seemed to work good and the locks didnt work.I think everything works in the 89 but i am not sure they are the same. __________________ Support our site Norwood Survivor

08-10-2006, 03:34 PM	#55
Eyegore What Hump? Join Date: Apr 2003 Location: New River AZ Posts: 2,009	Re: 89,86burb & 84blazer for parts I don't need the motors or window regulators just the wiring harness for the power windows & door locks, I'm installing power windows and door locks, I already have the motors and requlators but now I need the wiring harness and I would like to install power locks. __________________ Lil red 86 c-10 99 Sub 78 Camper Special w/ 454

08-10-2006, 03:53 PM	#56
BOSS Just here to help Join Date: Jan 2002 Location: Norwood,Mo Posts: 3,890	Re: 89,86burb & 84blazer for parts How about $20 for the wiring and the switches and i will check out both and see which one is in better shape?Plus shipping which shouldnt be much? __________________ Support our site Norwood Survivor

08-10-2006, 04:03 PM	#57
Eyegore What Hump? Join Date: Apr 2003 Location: New River AZ Posts: 2,009	Re: 89,86burb & 84blazer for parts Great, what about the power door locks? __________________ Lil red 86 c-10 99 Sub 78 Camper Special w/ 454

08-10-2006, 04:07 PM	#58
BOSS Just here to help Join Date: Jan 2002 Location: Norwood,Mo Posts: 3,890	Re: 89,86burb & 84blazer for parts how about another $5 for the wiring and switches for those?seeing they would be in the same box. __________________ Support our site Norwood Survivor

08-10-2006, 04:11 PM	#59
Eyegore What Hump? Join Date: Apr 2003 Location: New River AZ Posts: 2,009	Re: 89,86burb & 84blazer for parts Great that will do, can I PM you for specifics? __________________ Lil red 86 c-10 99 Sub 78 Camper Special w/ 454

08-10-2006, 04:12 PM	#60
BOSS Just here to help Join Date: Jan 2002 Location: Norwood,Mo Posts: 3,890	Re: 89,86burb & 84blazer for parts sure __________________ Support our site Norwood Survivor

08-11-2006, 10:11 PM	#61
rich-white Registered User Join Date: Feb 2004 Location: st. Louis Missouri Posts: 414	Re: 89,86burb & 84blazer for parts Boss; Do you still have the 4" lift and does it have the steering arm? Would be interested w/o rear springs just blocks and u-bolts and complete front end lift componets.

08-12-2006, 04:16 PM	#62
BOSS Just here to help Join Date: Jan 2002 Location: Norwood,Mo Posts: 3,890	Re: 89,86burb & 84blazer for parts rich-white = it doesnt have a lowered steering arm on it.let me know if you would still be interested ok. __________________ Support our site Norwood Survivor

08-12-2006, 07:32 PM	#63
rich-white Registered User Join Date: Feb 2004 Location: st. Louis Missouri Posts: 414	Re: 89,86burb & 84blazer for parts Still interested.. see if it has the the raised steering that goes on the axle usually used on 4" and over kits. Looks like a horseshoe just bent.

08-12-2006, 07:34 PM	#64
rich-white Registered User Join Date: Feb 2004 Location: st. Louis Missouri Posts: 414	Re: 89,86burb & 84blazer for parts or if you have a pic of the axle where the rear of the drag lik mounts would be good too.

08-13-2006, 11:35 PM	#65
wildmanaaron Registered User Join Date: Mar 2002 Location: Bowling Green, KY Posts: 396	Re: 89,86burb & 84blazer for parts Can you tell me if you have any 81-91 Silverado style door panels. Also looking for a set of the factory kickpanels for A/C Trucks. What all do you have left from the Blazer?? Pics would be appreciated of it. Thanks!



Register or Log In To remove these advertisements.

08-14-2006, 07:51 AM	#66
BOSS Just here to help Join Date: Jan 2002 Location: Norwood,Mo Posts: 3,890	Re: 89,86burb & 84blazer for parts I will try to get more pics taken today.really dont want to split up the lift though __________________ Support our site Norwood Survivor

Register or Log In To remove these advertisements.