Another delivery today - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68Stepbed · 09-05-2006, 02:42 PM

I ordered my drop kit last week from ECE. 2.5" drop spindles, 4" rear drop springs, and a shock relocater kit.

With the 1" front springs I have now, I'll have approx. a 3.5/4 drop.

67ChevyRedneck · 09-05-2006, 03:30 PM

LUV2XCLR8 · 09-05-2006, 03:39 PM

Nice, now we before, during, and after pic's

boraxman · 09-05-2006, 03:46 PM

ECE always has nice stuff.

ChevyDude · 09-05-2006, 04:01 PM

ECE is the best! I done the same as you...just used 2" Ground Force front springs.

68Stepbed · 09-05-2006, 07:43 PM

Quote:

Originally Posted by 67ChevyRedneck

Thanks Redneck!

Jimbotronics · 09-05-2006, 08:15 PM

I second Redneck's comment...

ECE is great to deal with!

67chevy2wd · 09-05-2006, 08:58 PM

Could I get you to measure you springs uninstalled hight. I have a set of drop springs but don't know for sure what drop they are and dont' want to have to install them to find out. Thanks, Andrew

68Stepbed · 09-06-2006, 08:32 AM

Quote:

Originally Posted by 67chevy2wd

Could I get you to measure you springs uninstalled hight. I have a set of drop springs but don't know for sure what drop they are and dont' want to have to install them to find out. Thanks, Andrew

Standing on a table and measuring the ends of the coils was 10 1/8". Hope this helps

67chevy2wd · 09-06-2006, 08:48 AM

Thanks, 68stepbed that will help alot.

67ChevyRedneck · 09-06-2006, 10:20 AM

Quote:

Originally Posted by 68Stepbed

Thanks Redneck!

I couldn't resist!

Quote:

Originally Posted by Jimbotronics

I second Redneck's comment...

ECE is great to deal with!

Yeah, ECE rocks! Their 1-1/4" sway bar kit couldn't have been easier to install (although I'm sure an OEM one would have been easy too.)

68Stepbed · 09-06-2006, 05:02 PM

Got the spindles painted today.

09-05-2006, 02:42 PM	#1
68Stepbed Registered User Join Date: Mar 2005 Location: 10-Uh-See Posts: 5,609	Another delivery today I ordered my drop kit last week from ECE. 2.5" drop spindles, 4" rear drop springs, and a shock relocater kit. With the 1" front springs I have now, I'll have approx. a 3.5/4 drop. __________________ Matt 68 C10 stepside, LS1/700R4, TCI Engineering suspension system Last edited by 68Stepbed; 10-04-2007 at 10:34 PM.

09-05-2006, 03:30 PM	#2
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Another delivery today __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

09-05-2006, 03:39 PM	#3
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Another delivery today Nice, now we before, during, and after pic's __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

09-05-2006, 03:46 PM	#4
boraxman Keepin an eye out Join Date: Feb 2003 Location: So.Cal Posts: 3,920	Re: Another delivery today ECE always has nice stuff. __________________ 1970 Chevy C10 SWB 5.3 1996 Toyota Tacoma SR5 4x4 2007 Vespa GTS 250 Scooter ZIP 91351

09-05-2006, 04:01 PM	#5
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Re: Another delivery today ECE is the best! I done the same as you...just used 2" Ground Force front springs.

09-05-2006, 08:15 PM	#7
Jimbotronics YA YA Join Date: Aug 2004 Location: Rockledge, Fl Posts: 1,273	Re: Another delivery today I second Redneck's comment... ECE is great to deal with! __________________ Jimbo '72 SWB - 350 (frame-off resto in progress - donations accepted) '04 Chevy Avalanche '03 Cadillac CTS (wife's ride) Restoration progress - http://67-72chevytrucks.com/vboard/s...d.php?t=335707

09-05-2006, 08:58 PM	#8
67chevy2wd Registered User Join Date: Sep 2003 Location: New Salem, ND Posts: 1,558	Re: Another delivery today Could I get you to measure you springs uninstalled hight. I have a set of drop springs but don't know for sure what drop they are and dont' want to have to install them to find out. Thanks, Andrew __________________ 07 Chevy classic LBZ Duramax (a few mods) '67 Chevy 1/2 ton 2wd (in pieces) '69 Chevy 1/2 ton 2wd (on hold) '71 GMC 3/4 ton 4x4 ‘71 GMC 1/2 ton 2wd suburban

09-06-2006, 08:48 AM	#10
67chevy2wd Registered User Join Date: Sep 2003 Location: New Salem, ND Posts: 1,558	Re: Another delivery today Thanks, 68stepbed that will help alot. __________________ 07 Chevy classic LBZ Duramax (a few mods) '67 Chevy 1/2 ton 2wd (in pieces) '69 Chevy 1/2 ton 2wd (on hold) '71 GMC 3/4 ton 4x4 ‘71 GMC 1/2 ton 2wd suburban

09-06-2006, 05:02 PM	#12
68Stepbed Registered User Join Date: Mar 2005 Location: 10-Uh-See Posts: 5,609	Re: Another delivery today Got the spindles painted today. __________________ Matt 68 C10 stepside, LS1/700R4, TCI Engineering suspension system Last edited by 68Stepbed; 10-04-2007 at 10:34 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.