Power steering pump - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*wolfthing2000* · 10-23-2006, 10:06 PM

If I remove the pump and the hoses from the Saginaw box, will there be any problems after reassembly?? Is air a problem in the system or just cycle it out by turning the wheel back and forth??????

TN4X4 · 10-23-2006, 10:09 PM

Good question. I'd be interested in this too. I tried the cycle back and forth thing, but my steering at idle is really choppy.

**LockDoc** · 10-23-2006, 11:33 PM

Check this thread out:

http://67-72chevytrucks.com/vboard/s...power+steering

Especially the last post by bubbagreen

LockDoc

sneakysnake · 10-24-2006, 10:57 AM

If you plan on driving it or not duct tape over the opening to keep dirt out of it. Air wont be a problem its a continuous flow hydraulic system.

*wolfthing2000* · 10-24-2006, 12:08 PM

So if I got it right, I can disconnect, plug holes, re-assemble later and work the air out with wheels jacked up???

sneakysnake · 10-24-2006, 01:05 PM

Yes, you dont have to jack it up the air will work it self out after a little bit of driving.You may get a little pump whine at first just recheck your fluid level after a bit.

Aarons72s · 10-24-2006, 01:22 PM

I have disconneted mine several times and just reconected. Never had a problem. Worked the same as before I unhooked it.
Aaron

10-23-2006, 10:06 PM	#1
wolfthing2000 Account Suspended Join Date: Oct 2004 Posts: 1,276	Power steering pump If I remove the pump and the hoses from the Saginaw box, will there be any problems after reassembly?? Is air a problem in the system or just cycle it out by turning the wheel back and forth??????

10-23-2006, 10:09 PM	#2
TN4X4 Registered User Join Date: Jul 2006 Location: Lebanon, TN Posts: 23	Re: Power steering pump Good question. I'd be interested in this too. I tried the cycle back and forth thing, but my steering at idle is really choppy. __________________ '72 LWB K20 - SOLD '66 Mustang 289 3spd '42 Chevrolet Fire Truck

10-23-2006, 11:33 PM	#3
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,958	Re: Power steering pump Check this thread out: http://67-72chevytrucks.com/vboard/s...power+steering Especially the last post by bubbagreen LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - Last edited by LockDoc; 10-23-2006 at 11:34 PM.

10-24-2006, 10:57 AM	#4
sneakysnake It's a catastrophic success. Join Date: Jan 2003 Location: Oklahoma Posts: 2,077	Re: Power steering pump If you plan on driving it or not duct tape over the opening to keep dirt out of it. Air wont be a problem its a continuous flow hydraulic system.

10-24-2006, 12:08 PM	#5
wolfthing2000 Account Suspended Join Date: Oct 2004 Posts: 1,276	Re: Power steering pump So if I got it right, I can disconnect, plug holes, re-assemble later and work the air out with wheels jacked up???

10-24-2006, 01:05 PM	#6
sneakysnake It's a catastrophic success. Join Date: Jan 2003 Location: Oklahoma Posts: 2,077	Re: Power steering pump Yes, you dont have to jack it up the air will work it self out after a little bit of driving.You may get a little pump whine at first just recheck your fluid level after a bit.

10-24-2006, 01:22 PM	#7
Aarons72s Registered User Join Date: Apr 2006 Location: oklahoma Posts: 10,669	Re: Power steering pump I have disconneted mine several times and just reconected. Never had a problem. Worked the same as before I unhooked it. Aaron



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.