Parting out 71 Long Fleet - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

djracer · 11-21-2006, 11:07 PM

Quote:

Originally Posted by Primer69er

sorry thats driverside but i meant the dark green one in pic #3 will that work with 69 chevy?

Where is your closest bus station? that would probably be cheapest! the third pic is a passenger side fender? the one that is off in pic five is a drivers side!

djracer · 11-21-2006, 11:08 PM

Quote:

Originally Posted by Hart_Rod

Kevin,

I need a nice set of bed ends (L&R tail light section). Basically about 12 inches from back to forward, top to bottom.

I'll check what the white bed ends look like!

chevdanbarnett · 11-22-2006, 12:20 AM

Quote:

Originally Posted by djracer

its an auto unless its been changed!

THE ROD IN I THINK ITS THE 4 PIC AND EVERTHING WITH IT

chevdanbarnett · 11-22-2006, 12:22 AM

Quote:

Originally Posted by djracer

More Pics

I MEAN THESE ONE

chevdanbarnett · 11-22-2006, 12:24 AM

Here

djracer · 11-22-2006, 12:29 AM

That truck came with an automatic I think! I can check tomorrow!

meathead95 · 11-22-2006, 11:27 AM

im interested in the white bed could yo get me some good pics of both sides of it to meathead95@hotmail.com. does it have a tailgate? how far are you from huntsville?

Primer69er · 11-22-2006, 11:51 AM

this one... but i will have to check on the bus station and get back to you
http://67-72chevytrucks.com/vboard/a...1&d=1164124328

Litdave · 11-28-2006, 03:17 PM

Djracer,

Do you have a 71 5-lug coil spring rearend laying around. I have a buddy who is looking for a 3.73 w/posi.

Litdave

djracer · 11-28-2006, 05:06 PM

I have a 5 lug coil rear but I don't know what gear or if its posi! I can try to check to see if its posi! I'm not sure of the gear!

woodridge · 11-28-2006, 10:55 PM

DJ, did uncle take the compressor and bracket? If not I will take it.

hotrod 80 · 11-28-2006, 11:03 PM

put me second in line behind chevdanbarnett for auto shift linkage and pivot brackets.

LUV2XCLR8 · 11-29-2006, 04:01 PM

Kevin, does it still have the rubber bump stops in the rear above the axles?

wydomkr · 11-29-2006, 05:13 PM

How much for the Grant wheel and adapter off the green/maroon truck? I see the dashpad is gone, is there a usable green one floating around somewhere?

djracer · 11-29-2006, 08:56 PM

Quote:

Originally Posted by woodridge

DJ, did uncle take the compressor and bracket? If not I will take it.

Uncle wants the brackets I don't know the condition of the compressor!

djracer · 11-29-2006, 09:05 PM

Quote:

Originally Posted by hotrod 80

put me second in line behind chevdanbarnett for auto shift linkage and pivot brackets.

I pm'd him if I don't here from him in 24hrs they are yours for 35 shipped!

djracer · 11-29-2006, 09:09 PM

Quote:

Originally Posted by LUV2XCLR8

Kevin, does it still have the rubber bump stops in the rear above the axles?

I'll check I have 3 parts trucks so I should!

djracer · 11-29-2006, 09:11 PM

Quote:

Originally Posted by wydomkr

How much for the Grant wheel and adapter off the green/maroon truck? I see the dashpad is gone, is there a usable green one floating around somewhere?

How's 35 shipped for the wheel and adapter?
I don't have a decent dashpad but you should be able to get a new one for 50 to 60 shipped!

woodridge · 11-29-2006, 10:08 PM

Quote:

Originally Posted by djracer

Uncle wants the brackets I don't know the condition of the compressor!

Really don't need the compressor just the brackets.

djracer · 11-29-2006, 10:22 PM

If I find a second set I'll let you know!

**zeusflash** · 11-29-2006, 11:58 PM

I need that clutch hole cover! How much shipped to 83854? Thanks, Mike

woodridge · 11-30-2006, 12:01 AM

Quote:

Originally Posted by djracer

If I find a second set I'll let you know!

Thanks Kevin

ghetto_superman · 11-30-2006, 09:50 PM

does the cab still have the throttle pedal? i need to upgrade my '68 cab to cable throttle intead fo linkage... if so, how much for the whole throttle setup shipped to 68434?

Midlothian Electric · 12-01-2006, 12:10 AM

How much for the seat in the Green truck?

djracer · 12-01-2006, 12:46 PM

Quote:

Originally Posted by ghetto_superman

does the cab still have the throttle pedal? i need to upgrade my '68 cab to cable throttle intead fo linkage... if so, how much for the whole throttle setup shipped to 68434?

Sorry its gone!

11-22-2006, 12:24 AM	#30
chevdanbarnett Senior Member Join Date: Apr 2006 Location: ohio medina Posts: 451	Re: Parting out 71 Long Fleet Here Attached Images

11-22-2006, 12:29 AM	#31
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Parting out 71 Long Fleet That truck came with an automatic I think! I can check tomorrow! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

11-22-2006, 11:27 AM	#32
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	Re: Parting out 71 Long Fleet im interested in the white bed could yo get me some good pics of both sides of it to meathead95@hotmail.com. does it have a tailgate? how far are you from huntsville? __________________ 72 2wd blazer 72 swb 4x4

11-22-2006, 11:51 AM	#33
Primer69er Just gettin started! Join Date: Nov 2006 Location: Hays Kansas Posts: 173	Re: Parting out 71 Long Fleet this one... but i will have to check on the bus station and get back to you http://67-72chevytrucks.com/vboard/a...1&d=1164124328

11-28-2006, 03:17 PM	#34
Litdave Registered User Join Date: Feb 2002 Location: Tullahoma, TN Posts: 202	Re: Parting out 71 Long Fleet Djracer, Do you have a 71 5-lug coil spring rearend laying around. I have a buddy who is looking for a 3.73 w/posi. Litdave __________________ 71 Factory SWB 4x4 Project 383/350/205 69 LWB 2wd CST Daily Driver ZZ4/700r4/3.73 72 SWB Future Hot Rod

11-28-2006, 05:06 PM	#35
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Parting out 71 Long Fleet I have a 5 lug coil rear but I don't know what gear or if its posi! I can try to check to see if its posi! I'm not sure of the gear! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

11-28-2006, 10:55 PM	#36
woodridge Senior Member Join Date: Feb 2005 Location: Maynardville, Tn Posts: 3,030	Re: Parting out 71 Long Fleet DJ, did uncle take the compressor and bracket? If not I will take it. __________________ SEMA Network- Protect our Hobby! 71 C30 in pieces, starting to come together. Click here for A Place For Tennessee Truck Enthusiest To Meet

11-28-2006, 11:03 PM	#37
hotrod 80 mini truck racer Join Date: Aug 2006 Location: Baytown , texas Posts: 3,010	Re: Parting out 71 Long Fleet put me second in line behind chevdanbarnett for auto shift linkage and pivot brackets.

11-29-2006, 04:01 PM	#38
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Parting out 71 Long Fleet Kevin, does it still have the rubber bump stops in the rear above the axles? __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

11-29-2006, 05:13 PM	#39
wydomkr Registered User Join Date: Mar 2006 Location: Rapid City, SD Posts: 96	Re: Parting out 71 Long Fleet How much for the Grant wheel and adapter off the green/maroon truck? I see the dashpad is gone, is there a usable green one floating around somewhere? __________________ Keith ------------- 1980 C-10 1981 C-30

11-29-2006, 10:22 PM	#45
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Parting out 71 Long Fleet If I find a second set I'll let you know! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

11-29-2006, 11:58 PM	#46
zeusflash Senior Member Join Date: Feb 2005 Location: Post Falls,Idaho Posts: 691	Re: Parting out 71 Long Fleet I need that clutch hole cover! How much shipped to 83854? Thanks, Mike __________________ '69 3/4 ton 427 CST Pickup '71 CST Blazer '72 GMC 3/4 4x4

11-30-2006, 09:50 PM	#48
ghetto_superman Registered User Join Date: Sep 2006 Location: Omaha, NE Posts: 1,982	Re: Parting out 71 Long Fleet does the cab still have the throttle pedal? i need to upgrade my '68 cab to cable throttle intead fo linkage... if so, how much for the whole throttle setup shipped to 68434? __________________ -1947 3100 -1968 C10 -1970 K20

12-01-2006, 12:10 AM	#49
Midlothian Electric Registered User Join Date: Sep 2006 Location: Midlothian, VA Posts: 50	Re: Parting out 71 Long Fleet How much for the seat in the Green truck? __________________ Quenton Lee Midlothian Electric Comapny Inc. Electrical Contractors Since 1965



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.