72 Stepside Chevy..Floorpans - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DarkSpader · 03-10-2007, 03:10 PM

Hello I am new to this site and still fumbling to figure out this board.

I would like to donate to this Board as soon as a figure out how.

My project truck is a 72 chevy stepside.

I am starting with the floorpans and the supports under the cab ok here are my questions I hopesomeone can help with.

I bought the patch panels for the floorpans but I cannot find a patch for at the rear of the cab under the gas tank for the metal is wroughted as well does anyone know I can buy a patch for this section?

Also does anyone know a good how to video on replacing the floorpans?

any help would be greatly appreacaited, I will post pictures as soon as I figure it out.
thanks
Eric

DarkSpader · 03-10-2007, 05:21 PM

Hello I am new to this site and still fumbling to figure out this board.

My project truck is a 72 chevy stepside.

I am starting with the floorpans and the supports under the cab, ok here are my questions I hopesomeone can help with.

I bought the patch panels for the floorpans but I cannot find a patch for at the rear of the cab under the gas tank for the metal is wroughted as well does anyone know I can buy a patch for this section? Also I can see to find where to purchase the Floor support channel as it is gone too.

Also does anyone know a good how to video on replacing the floorpans?

any help would be greatly appreacaited, I will post pictures as soon as I figure it out.
thanks
Eric

LUV2XCLR8 · 03-10-2007, 06:26 PM

From West TN

shaneschevys · 03-10-2007, 06:54 PM

Welcome from FT Worth TX.

droppedgmc · 03-10-2007, 07:44 PM

welcome from WA

cooters · 03-10-2007, 08:34 PM

The only fllor patch i have seen is the complete floor with braces, i believe it is a goodmark piece. As far as videos, efabman has videos but seems to be missing in action.

seanu · 03-10-2007, 08:58 PM

Yeah, with the whole floor section...I think you'd be money and time ahead...as far as I know, they have a section with and without the braces...but If your doing a floor...I don't know why you wouldn't just use the complete floor...

Yes, its a Goodmark part...and I've been waiting for someone to do this "repair"....so maybe you could do it, and let use all know how it goes

http://www.goodmarkindustries.com/GMCKTruck6772.html

Just scroll down to the "Cab Floor Pan Patches" section....

Longhorn Man · 03-10-2007, 09:07 PM

welcome to the board from 100 miles north!

DarkSpader · 03-10-2007, 09:39 PM

Thanks Guys I am going to look into that 1 piece deal that looks like the way to go. I will keep you posted.

Brand New to this board and already feel welcome.

jsbgump · 03-10-2007, 10:08 PM

Welcome to the board from Texas

DarkSpader · 03-10-2007, 10:54 PM

thanks for the warm welcome. I am sure I will be a fixture here now.

**Ron 586** · 03-10-2007, 11:12 PM

Welcome to the board from West Tennessee.

Joe67 · 03-10-2007, 11:34 PM

Welcome - looks like a nice truck

Regarding the videos - do a search for efabman I believe - he was selling some nice DVDs.

I have a link to the board subscription info in my signature below vvvvvvvvvv

krue · 03-11-2007, 07:45 AM

Welcome to the board from South Mississippi!

msgross · 03-11-2007, 08:24 AM

doubt efabman has done the complete floor yet but someone on the board has, I remember a thread but don't have it handy... welcome

**Canadian694x4** · 03-11-2007, 03:52 PM

Welcome To The Boards From The Great White North!

redneckgirl · 03-11-2007, 07:16 PM

Welcome from Maryland

Pickles · 03-16-2007, 10:12 PM

Welcome from Ky

L0WRIDE · 03-17-2007, 12:54 AM

Welcome to the board from New zealand

FRENCHBLUE72 · 03-18-2007, 05:47 AM

Welcome To The Board From Southern Oregon.

03-10-2007, 03:10 PM	#1
DarkSpader Registered User Join Date: Mar 2007 Location: cincinnati Posts: 10	72 Stepside Chevy..Floorpans Hello I am new to this site and still fumbling to figure out this board. I would like to donate to this Board as soon as a figure out how. My project truck is a 72 chevy stepside. I am starting with the floorpans and the supports under the cab ok here are my questions I hopesomeone can help with. I bought the patch panels for the floorpans but I cannot find a patch for at the rear of the cab under the gas tank for the metal is wroughted as well does anyone know I can buy a patch for this section? Also does anyone know a good how to video on replacing the floorpans? any help would be greatly appreacaited, I will post pictures as soon as I figure it out. thanks Eric Attached Images

03-10-2007, 05:21 PM	#2
DarkSpader Registered User Join Date: Mar 2007 Location: cincinnati Posts: 10	Floorpans Hello I am new to this site and still fumbling to figure out this board. My project truck is a 72 chevy stepside. I am starting with the floorpans and the supports under the cab, ok here are my questions I hopesomeone can help with. I bought the patch panels for the floorpans but I cannot find a patch for at the rear of the cab under the gas tank for the metal is wroughted as well does anyone know I can buy a patch for this section? Also I can see to find where to purchase the Floor support channel as it is gone too. Also does anyone know a good how to video on replacing the floorpans? any help would be greatly appreacaited, I will post pictures as soon as I figure it out. thanks Eric Attached Images

03-10-2007, 06:26 PM	#3
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: 72 Stepside Chevy..Floorpans From West TN __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

03-10-2007, 06:54 PM	#4
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	Re: 72 Stepside Chevy..Floorpans Welcome from FT Worth TX. __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club**

03-10-2007, 07:44 PM	#5
droppedgmc Truck Enthusiast Join Date: Dec 2006 Location: Arlington, WA Posts: 1,346	Re: 72 Stepside Chevy..Floorpans welcome from WA __________________ '85 swb

03-10-2007, 08:34 PM	#6
cooters Senior Member Join Date: Oct 2006 Location: Edmonton Alberta Posts: 458	Re: Floorpans The only fllor patch i have seen is the complete floor with braces, i believe it is a goodmark piece. As far as videos, efabman has videos but seems to be missing in action.

03-10-2007, 08:58 PM	#7
seanu Too many projects!!! Join Date: Jul 2000 Location: Jacksonville, Florida Posts: 508	Re: Floorpans Yeah, with the whole floor section...I think you'd be money and time ahead...as far as I know, they have a section with and without the braces...but If your doing a floor...I don't know why you wouldn't just use the complete floor... Yes, its a Goodmark part...and I've been waiting for someone to do this "repair"....so maybe you could do it, and let use all know how it goes http://www.goodmarkindustries.com/GMCKTruck6772.html Just scroll down to the "Cab Floor Pan Patches" section.... __________________ Sean 1995 Buick Roadmaster Sedan 2004 Chevy Trailblazer 5.3L V8 1963 Chevy Biscayne 4D Sedan 1971 Chevy C10 (now have 70 cab & frame) 1968 Chevy C10 (parts for the 70) 1991 Oldsmobile Custom Cruiser (Chevy 355 motor) 1937 Pontiac 8 4D Touring Sedan (in pieces) Jacksonville, Florida Last edited by seanu; 03-10-2007 at 09:58 PM.

03-10-2007, 09:07 PM	#8
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Floorpans welcome to the board from 100 miles north!

03-10-2007, 09:39 PM	#9
DarkSpader Registered User Join Date: Mar 2007 Location: cincinnati Posts: 10	Re: Floorpans Thanks Guys I am going to look into that 1 piece deal that looks like the way to go. I will keep you posted. Brand New to this board and already feel welcome.

03-10-2007, 10:08 PM	#10
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: 72 Stepside Chevy..Floorpans Welcome to the board from Texas __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

03-10-2007, 10:54 PM	#11
DarkSpader Registered User Join Date: Mar 2007 Location: cincinnati Posts: 10	Re: 72 Stepside Chevy..Floorpans thanks for the warm welcome. I am sure I will be a fixture here now.

03-10-2007, 11:12 PM	#12
Ron 586 RIP Mr Ron Join Date: Dec 2005 Location: Big Sandy, Tn. 38221 Posts: 8,150	Re: 72 Stepside Chevy..Floorpans Welcome to the board from West Tennessee. __________________ Ron (Mr Round Tuit) Be kinder than necessary, for everyone you meet is fighting some kind of battle TN Message Forum TN Facebook Group SETN Truck Show My Photobucket

03-10-2007, 11:34 PM	#13
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,733	Re: 72 Stepside Chevy..Floorpans Welcome - looks like a nice truck Regarding the videos - do a search for efabman I believe - he was selling some nice DVDs. I have a link to the board subscription info in my signature below vvvvvvvvvv __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

03-11-2007, 07:45 AM	#14
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Re: 72 Stepside Chevy..Floorpans Welcome to the board from South Mississippi! __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

03-11-2007, 08:24 AM	#15
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 72 Stepside Chevy..Floorpans doubt efabman has done the complete floor yet but someone on the board has, I remember a thread but don't have it handy... welcome __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"



Register or Log In To remove these advertisements.

03-11-2007, 03:52 PM	#16
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,307	Re: 72 Stepside Chevy..Floorpans Welcome To The Boards From The Great White North! __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 22 Yrs - 1 of 208 Built & Sold In Canada!- 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 3 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 17 Yrs- 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 15 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 8 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

03-11-2007, 07:16 PM	#17
redneckgirl Registered User Join Date: Jun 2006 Location: Bel Air, Maryland Posts: 4,853	Re: 72 Stepside Chevy..Floorpans Welcome from Maryland __________________ The place where you made your stand never mattered. Only that you were there... and still on your feet. Stephen King

03-16-2007, 10:12 PM	#18
Pickles Registered User Join Date: May 2006 Location: Dickson,Tn Posts: 811	Re: 72 Stepside Chevy..Floorpans Welcome from Ky __________________ Pickles

03-17-2007, 12:54 AM	#19
L0WRIDE Registered User Join Date: Jan 2005 Location: AUCKLAND, NEW ZEALAND Posts: 2,166	Re: 72 Stepside Chevy..Floorpans Welcome to the board from New zealand __________________ 49 CHEVROLET 1/2 TON, 52 CHEVROLET SEDAN 62 HARDTOP NOVA 65 CHEVROLET BB LWB FLEETSIDE 90 CHEVROLET EXTRA CAB CHEVY ONLY - NZ Chapter http://67-72chevytrucks.com/vboard/s...d.php?t=137984

03-18-2007, 05:47 AM	#20
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: 72 Stepside Chevy..Floorpans Welcome To The Board From Southern Oregon. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

Register or Log In To remove these advertisements.