Feedback on Engine Factory Crate Motors Needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72LS7Propane · 04-03-2007, 06:28 PM

I am considering purchasing a 350 crate motor from enginefactory.com and wondered if anyone here had done the same in the past. Any, hopefully positive, feedback would be greatly appreciated. It would also ease my fears
of getting a motor sent to Canada that was not as advertised. OOOuch!!!

pcmcobra · 04-03-2007, 07:05 PM

my dad has one of their 350/400hp motors. or the march serpentine kit, sweet motor. He is yet to fire it up, still have to do the wiring, he just got the car back from paint a few weeks ago.
This pic is from awhile back...

72LS7Propane · 04-04-2007, 01:02 PM

That is basically the motor which I am looking at. 375 HP/425 lb. ft. tourque.
Just with no air and not the close in March system. They look like a very reputable engine builder.

Although I think that someone once told me that looks can be deceiving.

cdowns · 04-04-2007, 03:50 PM

i bought a 310hp turnkey from them about 7or8years ago was a true plug and play deal no issues with it didnt have to touch a thing// i also went and checked out the factory in new jersey very friendly and a pretty impressive operation i HIGHLY RECCOMEND in fact i'm thinking of buyint a stroker motor from them in the near future

72LS7Propane · 04-05-2007, 12:19 AM

Thanks for the thumbs up guys

04-03-2007, 06:28 PM	#1
72LS7Propane Registered User Join Date: Mar 2007 Location: Calgary, Alberta, Canada Posts: 14	Feedback on Engine Factory Crate Motors Needed I am considering purchasing a 350 crate motor from enginefactory.com and wondered if anyone here had done the same in the past. Any, hopefully positive, feedback would be greatly appreciated. It would also ease my fears of getting a motor sent to Canada that was not as advertised. OOOuch!!!

04-03-2007, 07:05 PM	#2
pcmcobra Registered User Join Date: Aug 2006 Location: Florida Posts: 1,684	Re: Feedback on Engine Factory Crate Motors Needed my dad has one of their 350/400hp motors. or the march serpentine kit, sweet motor. He is yet to fire it up, still have to do the wiring, he just got the car back from paint a few weeks ago. This pic is from awhile back... Attached Images __________________ 1986 C10 SWB 6.0/6l90e Miami...Flee it like a native

04-04-2007, 01:02 PM	#3
72LS7Propane Registered User Join Date: Mar 2007 Location: Calgary, Alberta, Canada Posts: 14	Re: Feedback on Engine Factory Crate Motors Needed That is basically the motor which I am looking at. 375 HP/425 lb. ft. tourque. Just with no air and not the close in March system. They look like a very reputable engine builder. Although I think that someone once told me that looks can be deceiving.

04-04-2007, 03:50 PM	#4
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Feedback on Engine Factory Crate Motors Needed i bought a 310hp turnkey from them about 7or8years ago was a true plug and play deal no issues with it didnt have to touch a thing// i also went and checked out the factory in new jersey very friendly and a pretty impressive operation i HIGHLY RECCOMEND in fact i'm thinking of buyint a stroker motor from them in the near future __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

04-05-2007, 12:19 AM	#5
72LS7Propane Registered User Join Date: Mar 2007 Location: Calgary, Alberta, Canada Posts: 14	Re: Feedback on Engine Factory Crate Motors Needed Thanks for the thumbs up guys



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.