tie rods - The 1947 - Present Chevrolet & GMC Truck Message Board Network

otsenre · 04-08-2007, 12:45 PM

Is the tie rod on a 3/4 ton the same as a 1/2 ton, I am assuming they are the same. Also why do some want to know the length of one, I thought they were all same length, What do I know?

Thanks Ernest

Aarons72s · 04-10-2007, 01:44 AM

They are different, at least according to the catalogs. Im guessing you are dealling with a 71-72, from your avatar. The adjuster sleeves are listed as the same between 1/2 and 3/4, but the inner and outter tie rods are different. I dont know why they would ask about the length. Hope this helps and good luck.

04-08-2007, 12:45 PM	#1
otsenre Registered User Join Date: Feb 2007 Location: Colorado Springs, Co Posts: 1,939	tie rods Is the tie rod on a 3/4 ton the same as a 1/2 ton, I am assuming they are the same. Also why do some want to know the length of one, I thought they were all same length, What do I know? Thanks Ernest

04-10-2007, 01:44 AM	#2
Aarons72s Registered User Join Date: Apr 2006 Location: oklahoma Posts: 10,669	Re: tie rods They are different, at least according to the catalogs. Im guessing you are dealling with a 71-72, from your avatar. The adjuster sleeves are listed as the same between 1/2 and 3/4, but the inner and outter tie rods are different. I dont know why they would ask about the length. Hope this helps and good luck.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.