Need 2wd Blazer Drop Susp - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Desert Rat** · 12-05-2002, 09:41 PM

Who and whats the best quality for these year truck,i know the 67-72s but planning on about a 4/6 on the Blazer i have so i assume coils,spindles,leaf springs and hangers.ive seen lots of companies and major price differences any recommendations,or anyone have any of this stuff?

**Captkaos** · 12-05-2002, 11:59 PM

Hey Desert, I recommend Western Chassis, Belltech or DJM parts, in no particular order. Although, I have had luck even with AIM products.

As for lowering parts, have you looked in this thread?
http://67-72chevytrucks.com/vboard/s...threadid=32101

Tom · 12-09-2002, 06:32 PM

Ive bought from all the componies that chris listed. Western chassie makes the best stuff Ive ever seen. Extremly impressed. But they dont offer 3" spindles. I used DJM 3" spindles, and they look ok. Havent installed yet. I have 3" belltech spindles on the 78. They didnt fit quite as well as one would think for $300. DJM's run $186 when I bought em.
For coils, Ive used both suspension techniques [summit brand coils] and eibach progressive rates, both 2" drop. Id use either company again.

12-05-2002, 09:41 PM	#1
Desert Rat Senior Member Join Date: Dec 1999 Location: Darrington, Washington Posts: 3,963	Need 2wd Blazer Drop Susp Who and whats the best quality for these year truck,i know the 67-72s but planning on about a 4/6 on the Blazer i have so i assume coils,spindles,leaf springs and hangers.ive seen lots of companies and major price differences any recommendations,or anyone have any of this stuff?

12-05-2002, 11:59 PM	#2
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Hey Desert, I recommend Western Chassis, Belltech or DJM parts, in no particular order. Although, I have had luck even with AIM products. As for lowering parts, have you looked in this thread? http://67-72chevytrucks.com/vboard/s...threadid=32101 __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

12-09-2002, 06:32 PM	#3
Tom driving is in my blood Join Date: Dec 1999 Location: Mesa AZ Posts: 5,748	Ive bought from all the componies that chris listed. Western chassie makes the best stuff Ive ever seen. Extremly impressed. But they dont offer 3" spindles. I used DJM 3" spindles, and they look ok. Havent installed yet. I have 3" belltech spindles on the 78. They didnt fit quite as well as one would think for $300. DJM's run $186 when I bought em. For coils, Ive used both suspension techniques [summit brand coils] and eibach progressive rates, both 2" drop. Id use either company again. __________________ -78 c10 short/step: 388cid, M20, 5/5 drop, lots more. Playtoy and first vehicle. -98 c1500 x-cab: 5.7L, 17" rims, 5/6 drop, flowmaster, helper bags,NBS rear disk brakes. -02 Suburban 4x4: leveled front -CBR600F4i, CBR600RR, CBR1000RR, and standup skis DISCLAIMER: I cant spell for the life of me.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.