FS: '70 SWB chassis, ECE drop, FCG tank, Discs - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BowTieOgre · 06-13-2007, 12:55 AM

Im selling my '70 SWB project until I can afford to put the time and funds into that sort of endeavor. I will try to list all that I can remember and post a good amount of pics but if you have questions or need more pics just let me know.

Chassis is SOLD but tank is still for sale.

- FuelCellGuy tank for underbed installation....asking $525 shipped.

BowTieOgre · 06-13-2007, 12:58 AM

More pics

HuggerCST · 06-13-2007, 10:40 AM

If you decide to seperate the hitch, let me know, I'll be at the board meet.

BowTieOgre · 06-13-2007, 04:27 PM

Not planning on parting out but you'll be the first to know.

AuggieStyle · 06-13-2007, 06:28 PM

how much for the rear disc set up and the rear coils. shipped to 75219.
thanx

AuggieStyle · 06-13-2007, 06:43 PM

Quote:

Originally Posted by AuggieStyle

how much for the rear disc set up and the rear coils. shipped to 75219.
thanx

gotcha selling the whole frame for 2200. amazing what you get out of a post when you read it.

BowTieOgre · 06-13-2007, 10:31 PM

Ive got over $3200 invested (plus hundreds in shipping) in everything listed above and thats not including what I paid for the excellent condition SWB coil frame.

Make sure you check out the ad I have going to sell my 73 Blazer.

onetonk5 · 06-13-2007, 10:58 PM

I remember that frame....you must of gotten that from Kevin?

BowTieOgre · 06-13-2007, 11:24 PM

Quote:

Originally Posted by onetonk5

I remember that frame....you must of gotten that from Kevin?

I sure did, good fella that drag racin' stereo installin' DJn' fool!

Staceydude · 06-13-2007, 11:39 PM

Looks like alot of work and parts into this thing.

Good luck on the sale.

Regards

OldSkool71 · 06-14-2007, 04:17 AM

Man if you were closer we could talk. Looks like a nice starting point for a resto. Good luck.

BowTieOgre · 06-15-2007, 11:51 AM

ttt

smoky02 · 06-15-2007, 05:43 PM

I sure I had seen this thread about 3 months ago...but I do need a rear end...any idea where to find one for a 5 lug truck?

byrd · 06-15-2007, 05:50 PM

in pic #5 it looks like the frame is tweaked a little? like one rail is higher than the other? Randy

BowTieOgre · 06-15-2007, 06:35 PM

Quote:

Originally Posted by byrd

in pic #5 it looks like the frame is tweaked a little? like one rail is higher than the other? Randy

As far as I and the PO know it is fine but I will investigate. How would you go about that? Maybe measure from the bottom of the frame to the ground in several places all the way back on both sides and see if there is a difference?

byrd · 06-15-2007, 07:45 PM

Quote:

Originally Posted by BowTieOgre

As far as I and the PO know it is fine but I will investigate. How would you go about that? Maybe measure from the bottom of the frame to the ground in several places all the way back on both sides and see if there is a difference?

unless the floor you are using to measure is perfectly level that wil not work. but after looking a little harder at the frame it looks from the last x-member back the PS frame rail is running down hill, or vice versa or is the floor out of level?

68 P.O.S. · 06-15-2007, 07:46 PM

I'm interested in the cab, what can you tell me about it?

DMARCUM123 · 06-16-2007, 07:52 AM

if some chance it gets parted put me in for the trailing arm crossmember

BowTieOgre · 06-16-2007, 06:22 PM

Quote:

Originally Posted by 68 P.O.S.

I'm interested in the cab, what can you tell me about it?

Cab is a '70 A/C cab that has had rockers and cab corners replaced and a good looking roof. It has also had the gas hole filled. It has some surface rust from being outside at my house (was in a garage up until 4 months ago). There is one section of the floor near the driver footwell that needs a patch. I will get pics when i start the thread.

**PICKMUP** · 06-17-2007, 02:24 PM

OK, I give up! That is a nice package. Why do people want you to break it up and sell of the NEW parts that can be bought from several dealers...all day long?

**special-K** · 06-18-2007, 12:30 AM

I agree.Seems like only yesterday that I ran 1,100 miles to Pensacola to get a frame that was not as done-up as this one.And,guess who helped me out?I don`t want tomention any user names,but his initials are bowtieogre.He wasn`t selling it,just helped me out bigtime.Now,someone go and get this frame and build a hella nice truck.Kris,sorry you have to bail.

BowTieOgre · 06-18-2007, 09:20 AM

Quote:

Originally Posted by special-K

I agree.Seems like only yesterday that I ran 1,100 miles to Pensacola to get a frame that was not as done-up as this one.And,guess who helped me out?I don`t want tomention any user names,but his initials are bowtieogre.He wasn`t selling it,just helped me out bigtime.Now,someone go and get this frame and build a hella nice truck.Kris,sorry you have to bail.

Thanks for the kind words Tim. Im not too worried about selling my project as there will always be other opportunities. My financial situation has changed and I owe it to my son to make whatever sacrifices needed to make sure he has a fair shake in life. He was born with a hearing loss and insurance, therapy and all the bills that go with it say the project has to go....

so make me an offer!

Staceydude · 06-18-2007, 04:48 PM

Best of luck with this.

I am in somewhat the same situation with my wife and medical bills or I would finish mine up and just buy something to pul my boat on the side.

They come first.

Bowtie, I am sending you a PM with a contact from the COLOK5 board who PMed me about your Blazer. I do not know him just told him I would forward his info to you.

Regards

BowTieOgre · 06-18-2007, 05:08 PM

Quote:

Originally Posted by Staceydude

Best of luck with this.

I am in somewhat the same situation with my wife and medical bills or I would finish mine up and just buy something to pul my boat on the side.

They come first.

Bowtie, I am sending you a PM with a contact from the COLOK5 board who PMed me about your Blazer. I do not know him just told him I would forward his info to you.

Regards

Thanks for the heads up!

BowTieOgre · 06-19-2007, 11:54 PM

SOLD IT SOLD IT SOLD IT

Thanks one9six9!

FCG tank is still for sale if HartRod passes.

06-13-2007, 12:55 AM	#1
BowTieOgre Registered User Join Date: Mar 2006 Location: Pensacola, FL Posts: 1,461	FS: '70 SWB chassis, ECE drop, FCG tank, Discs Im selling my '70 SWB project until I can afford to put the time and funds into that sort of endeavor. I will try to list all that I can remember and post a good amount of pics but if you have questions or need more pics just let me know. Chassis is SOLD but tank is still for sale. - FuelCellGuy tank for underbed installation....asking $525 shipped. Attached Images __________________ 1986 C10 - LWB, 305/700r4, posi, vortec heads Last edited by BowTieOgre; 06-27-2007 at 11:04 AM.

06-13-2007, 12:58 AM	#2
BowTieOgre Registered User Join Date: Mar 2006 Location: Pensacola, FL Posts: 1,461	Re: FS: '70 SWB chassis, ECE drop, FCG tank, Discs More pics Attached Images __________________ 1986 C10 - LWB, 305/700r4, posi, vortec heads

06-13-2007, 10:40 AM	#3
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: FS: '70 SWB chassis, ECE drop, FCG tank, Discs If you decide to seperate the hitch, let me know, I'll be at the board meet. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com Last edited by HuggerCST; 06-13-2007 at 10:42 AM.

06-13-2007, 04:27 PM	#4
BowTieOgre Registered User Join Date: Mar 2006 Location: Pensacola, FL Posts: 1,461	Re: FS: '70 SWB chassis, ECE drop, FCG tank, Discs Not planning on parting out but you'll be the first to know. __________________ 1986 C10 - LWB, 305/700r4, posi, vortec heads

06-13-2007, 10:31 PM	#7
BowTieOgre Registered User Join Date: Mar 2006 Location: Pensacola, FL Posts: 1,461	Re: FS: '70 SWB chassis, ECE drop, FCG tank, Discs Ive got over $3200 invested (plus hundreds in shipping) in everything listed above and thats not including what I paid for the excellent condition SWB coil frame. Make sure you check out the ad I have going to sell my 73 Blazer. __________________ 1986 C10 - LWB, 305/700r4, posi, vortec heads Last edited by BowTieOgre; 06-13-2007 at 10:32 PM.

06-13-2007, 06:28 PM	#5
AuggieStyle Registered User Join Date: Apr 2007 Location: Dallas,TX. Posts: 499	Re: FS: '70 SWB chassis, ECE drop, FCG tank, Discs how much for the rear disc set up and the rear coils. shipped to 75219. thanx

06-13-2007, 10:58 PM	#8
onetonk5 Cereal Killer Join Date: Jan 2006 Location: Montgomery, Alabama Posts: 639	Re: FS: '70 SWB chassis, ECE drop, FCG tank, Discs I remember that frame....you must of gotten that from Kevin? __________________ If I dont do it....somebody else will.

06-13-2007, 11:39 PM	#10
Staceydude Registered User Join Date: Jun 2004 Location: DFW Area Texas Posts: 436	Re: FS: '70 SWB chassis, ECE drop, FCG tank, Discs Looks like alot of work and parts into this thing. Good luck on the sale. Regards

06-14-2007, 04:17 AM	#11
OldSkool71 C/10 CLUB MEMBER Join Date: Jul 2003 Location: Lakewood, CA Posts: 993	Re: FS: '70 SWB chassis, ECE drop, FCG tank, Discs Man if you were closer we could talk. Looks like a nice starting point for a resto. Good luck. __________________ -Ron-

06-15-2007, 11:51 AM	#12
BowTieOgre Registered User Join Date: Mar 2006 Location: Pensacola, FL Posts: 1,461	Re: FS: '70 SWB chassis, ECE drop, FCG tank, Discs ttt __________________ 1986 C10 - LWB, 305/700r4, posi, vortec heads

06-15-2007, 05:43 PM	#13
smoky02 Registered User Join Date: Oct 2003 Location: Sunny, Florida, some might call it South Alabama Posts: 834	Re: FS: '70 SWB chassis, ECE drop, FCG tank, Discs I sure I had seen this thread about 3 months ago...but I do need a rear end...any idea where to find one for a 5 lug truck? __________________ Just sold my C10...sad day... Looking for a 1972 Blazer to hopefully fill the hole in my heart.

06-15-2007, 07:46 PM	#17
68 P.O.S. Registered User Join Date: Jan 2007 Location: Puyallup, WA Posts: 1,662	Re: FS: '70 SWB chassis, ECE drop, FCG tank, Discs I'm interested in the cab, what can you tell me about it? __________________ 72 C10 lwb fleetside -stock 350/350 combo

06-16-2007, 07:52 AM	#18
DMARCUM123 Registered User Join Date: Sep 2006 Location: WAYNE, WV. Posts: 675	Re: FS: '70 SWB chassis, ECE drop, FCG tank, Discs if some chance it gets parted put me in for the trailing arm crossmember

06-17-2007, 02:24 PM	#20
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,166	Re: FS: '70 SWB chassis, ECE drop, FCG tank, Discs OK, I give up! That is a nice package. Why do people want you to break it up and sell of the NEW parts that can be bought from several dealers...all day long?

06-18-2007, 12:30 AM	#21
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: FS: '70 SWB chassis, ECE drop, FCG tank, Discs I agree.Seems like only yesterday that I ran 1,100 miles to Pensacola to get a frame that was not as done-up as this one.And,guess who helped me out?I don`t want tomention any user names,but his initials are bowtieogre.He wasn`t selling it,just helped me out bigtime.Now,someone go and get this frame and build a hella nice truck.Kris,sorry you have to bail. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

06-18-2007, 04:48 PM	#23
Staceydude Registered User Join Date: Jun 2004 Location: DFW Area Texas Posts: 436	Re: FS: '70 SWB chassis, ECE drop, FCG tank, Discs Best of luck with this. I am in somewhat the same situation with my wife and medical bills or I would finish mine up and just buy something to pul my boat on the side. They come first. Bowtie, I am sending you a PM with a contact from the COLOK5 board who PMed me about your Blazer. I do not know him just told him I would forward his info to you. Regards

06-19-2007, 11:54 PM	#25
BowTieOgre Registered User Join Date: Mar 2006 Location: Pensacola, FL Posts: 1,461	Re: FS: '70 SWB chassis, ECE drop, FCG tank, Discs SOLD IT SOLD IT SOLD IT Thanks one9six9! FCG tank is still for sale if HartRod passes. __________________ 1986 C10 - LWB, 305/700r4, posi, vortec heads

Register or Log In To remove these advertisements.