I have another 69 C20 that needs parted - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**oldgold70c10** · 06-22-2007, 07:41 PM

Would be interested in the complete dash (don't need glove box door, heater control, or cig. lighter, just complete metal dash and ash tray). Will you be at the meet?

OLDIRON69 · 06-22-2007, 11:30 PM

Mario,

I'll give you a call tomorrow or hollar back at me. I will be in and out so if you miss me leave a msg and I'll call you back. Do you still need the frame horn? I like what I saw on the parts truck.

Marlin

WORNBRAKES · 06-23-2007, 12:19 AM

oldgold-If I remember correctley, I should have an uncut a/c and uncut non a/c dash. I will verify on Sunday.
Marlin- sent you a PM

WORNBRAKES · 06-24-2007, 10:23 PM

Oldgold-I do have both dashes I mentioned. The non a/c one has some good rust at the glove box hinge. I forgot to look at the A/C. I will look tomorrow. I wish I could make the meet but I cant this year. Next year.

OLDIRON69 · 06-25-2007, 08:26 AM

Thanks Mario for the parts, Good to meet a fellow board member. Have fun with those trucks..!

**bobvilla67** · 06-25-2007, 05:16 PM

Mario,I will call you to set up a day to pick up the sway bar,are you including the sway bar brackets? I will pass on the 8 lug wheels,I will be parting the truck and sending it to scrap.thanks

WORNBRAKES · 06-25-2007, 05:35 PM

Yea Marlin it was nice to meet you as well. We will have to get the trucks together sometime. Bobby should come as well as the other East siders.

Bobby, The bushing's and bushing brackets are included with it. The bushings apear to be in good shape. Give me a call, I am available most evenings out here.

WORNBRAKES · 06-25-2007, 08:46 PM

Oldgold- Here are your pics. 40.00 for the a/c dash or 25.00 for the non a/c. Both + Shiping. Tell me where you would like it cut. I usually remove the 6 bolts and cut under the dash pad.

WORNBRAKES · 07-05-2007, 11:30 PM

bobby, I missed you out there. Give me a call and we can arrange another time to meet.

speed-racer · 07-08-2007, 11:57 PM

I'll take the steering column if the pointer is not cracked. Please let me know what shipping will cost to 72921.

WORNBRAKES · 07-09-2007, 12:50 PM

speed racer- Sent you a PM

**ScottH** · 07-09-2007, 03:01 PM

Did u sell the hubcaps?

424shee · 07-09-2007, 03:55 PM

I'm intrested in the core support if you would ship it to 98626.depending on the price.thanks

Walts_restoration · 07-09-2007, 04:03 PM

the air compresser sitting on the right side floorboard, that the same for an 86? V belt pulley on it, if so im intereested pending cost and shipping

Walts_restoration · 07-09-2007, 04:06 PM

right there if you missed it

BIGCHEVYMAN · 07-09-2007, 06:10 PM

how much for the hood and do you have any pics of it?

WORNBRAKES · 07-10-2007, 12:17 PM

Hubcaps are gone.
424- I will have to get a weight on it. I figure it wont be cheap all the way up to the NW.
Walt- The guy I bought the trucks from said that the compressor come from a mid 80's Buick and that it worked fine. The mount brackets were also with it. I will need to get a look at it and weight it to get an accurate shipping quote. It is out on the farm. I will get out there soon.
Bigchevyman- This truck did not have a hood however I have 5. They range from 10.00 up to 70.00. I will get pics as soon as I am out there.
Thanks,
Mario

indyracer · 07-10-2007, 02:00 PM

How is the ignition and do you have a key? If you don't have a key, I really only need the bezel and spacer. How much to 46001?

OLDIRON69 · 07-10-2007, 02:09 PM

If he passes on the core support, what do you need to get for it? It it rusted out under the battery tray?

WORNBRAKES · 07-11-2007, 01:44 AM

indyracer- I have the beazle and the back spacer that the beazle slides into. 10.00 shipped.
Marlin, I will put you next in line. As for the rust, it did not look to bad and I will attach the only pic I have of it right now. I can get another pic later.
As posted in the top of the thread, the aux battery tray is for the blazer.

steering column is SOLD.

WORNBRAKES · 07-11-2007, 01:47 AM

here it is

blazer72 · 07-11-2007, 12:13 PM

I would like a complete rolling 3/4 chassis - how much

Walts_restoration · 07-11-2007, 01:06 PM

keep me posted on the ac pump

WORNBRAKES · 07-13-2007, 04:07 PM

old gold, here are the pictures. PM was sent.

On the hood and core support, my scale is broke and I cant get an accurate weight. Can anyone post the weight and dimentions of a hood and core support? Thanks

walt, I am going to go get the pump and calculate shipping. What is your zip?

Blazer 72, 350.00 on the rolling chassis. If needed, I could deliver in August to Oaklahoma City for a small fee.

Thanks

Walts_restoration · 07-13-2007, 06:54 PM

Ryan Spencer
761 hwy 40
Lawrence, ks 66049

06-22-2007, 07:41 PM	#26
oldgold70c10 Who's got steelies? Join Date: Feb 2006 Location: Morrison, Oklahoma Posts: 1,025	Re: I have another 69 C20 that needs parted Would be interested in the complete dash (don't need glove box door, heater control, or cig. lighter, just complete metal dash and ash tray). Will you be at the meet? __________________ 1969 C10 LWB W/ 250 I6 & 3spd 1970 C10 with '67 small window cab, 68 front end, blue; 305/TH350, 3.08 limited slip rear end, manual brakes, power steering; & 4-wheel drums-My daily driver. 1975 Chevelle Malibu Classic Coupe 350/th350 mint green 1970 C20 Suburban 350/700R4 4.10 gearing green & white 1978 Big 10 Silverado 350/th350, working ac, 2 tone blue-My summer daily driver 1983 GMC 1500 Sierra 305/SM465 2.73 rear end How to add a trip odometer to your 67-72 stock speedometer How to rebuild your Q-Jet My Truck Page My Youtube Channel

06-22-2007, 11:30 PM	#27
OLDIRON69 Registered User Join Date: Mar 2007 Location: Ben Wheeler,Texas Posts: 992	Re: I have another 69 C20 that needs parted Mario, I'll give you a call tomorrow or hollar back at me. I will be in and out so if you miss me leave a msg and I'll call you back. Do you still need the frame horn? I like what I saw on the parts truck. Marlin __________________ 05 2500HD 6.0 excab 69 LWB-Gone but not forgotten! 68 Dodge Charger 383/727 69 Dodge Charger-440/4spd

06-23-2007, 12:19 AM	#28
WORNBRAKES Senior Member Join Date: Jul 2001 Location: Hughesville, MD Posts: 1,350	Re: I have another 69 C20 that needs parted oldgold-If I remember correctley, I should have an uncut a/c and uncut non a/c dash. I will verify on Sunday. Marlin- sent you a PM __________________ Mario and Mandy Hughesville, MD 20637 69 C10 305/350 71 K5 Basket case 75 K10 Rescue Parting out 77 MG Midget Parting out 15 6.7L Cummins

06-24-2007, 10:23 PM	#29
WORNBRAKES Senior Member Join Date: Jul 2001 Location: Hughesville, MD Posts: 1,350	Re: I have another 69 C20 that needs parted Oldgold-I do have both dashes I mentioned. The non a/c one has some good rust at the glove box hinge. I forgot to look at the A/C. I will look tomorrow. I wish I could make the meet but I cant this year. Next year. __________________ Mario and Mandy Hughesville, MD 20637 69 C10 305/350 71 K5 Basket case 75 K10 Rescue Parting out 77 MG Midget Parting out 15 6.7L Cummins

06-25-2007, 08:26 AM	#30
OLDIRON69 Registered User Join Date: Mar 2007 Location: Ben Wheeler,Texas Posts: 992	Re: I have another 69 C20 that needs parted Thanks Mario for the parts, Good to meet a fellow board member. Have fun with those trucks..! __________________ 05 2500HD 6.0 excab 69 LWB-Gone but not forgotten! 68 Dodge Charger 383/727 69 Dodge Charger-440/4spd

06-25-2007, 05:16 PM	#31
bobvilla67 Registered User Join Date: Jan 2002 Location: Dallas,Tx.,USA Posts: 781	Re: I have another 69 C20 that needs parted Mario,I will call you to set up a day to pick up the sway bar,are you including the sway bar brackets? I will pass on the 8 lug wheels,I will be parting the truck and sending it to scrap.thanks __________________ 1968 Custom 10 SWB 1970 2wd Blazer 350/400 1972 K20 292/350

06-25-2007, 05:35 PM	#32
WORNBRAKES Senior Member Join Date: Jul 2001 Location: Hughesville, MD Posts: 1,350	Re: I have another 69 C20 that needs parted Yea Marlin it was nice to meet you as well. We will have to get the trucks together sometime. Bobby should come as well as the other East siders. Bobby, The bushing's and bushing brackets are included with it. The bushings apear to be in good shape. Give me a call, I am available most evenings out here. __________________ Mario and Mandy Hughesville, MD 20637 69 C10 305/350 71 K5 Basket case 75 K10 Rescue Parting out 77 MG Midget Parting out 15 6.7L Cummins

06-25-2007, 08:46 PM	#33
WORNBRAKES Senior Member Join Date: Jul 2001 Location: Hughesville, MD Posts: 1,350	Re: I have another 69 C20 that needs parted Oldgold- Here are your pics. 40.00 for the a/c dash or 25.00 for the non a/c. Both + Shiping. Tell me where you would like it cut. I usually remove the 6 bolts and cut under the dash pad. Attached Images __________________ Mario and Mandy Hughesville, MD 20637 69 C10 305/350 71 K5 Basket case 75 K10 Rescue Parting out 77 MG Midget Parting out 15 6.7L Cummins Last edited by WORNBRAKES; 07-05-2007 at 11:29 PM.

07-05-2007, 11:30 PM	#34
WORNBRAKES Senior Member Join Date: Jul 2001 Location: Hughesville, MD Posts: 1,350	Re: I have another 69 C20 that needs parted bobby, I missed you out there. Give me a call and we can arrange another time to meet. __________________ Mario and Mandy Hughesville, MD 20637 69 C10 305/350 71 K5 Basket case 75 K10 Rescue Parting out 77 MG Midget Parting out 15 6.7L Cummins

07-08-2007, 11:57 PM	#35
speed-racer Registered User Join Date: Sep 2006 Location: Alma, Arkansas Posts: 75	Re: I have another 69 C20 that needs parted I'll take the steering column if the pointer is not cracked. Please let me know what shipping will cost to 72921.

07-09-2007, 12:50 PM	#36
WORNBRAKES Senior Member Join Date: Jul 2001 Location: Hughesville, MD Posts: 1,350	Re: I have another 69 C20 that needs parted speed racer- Sent you a PM __________________ Mario and Mandy Hughesville, MD 20637 69 C10 305/350 71 K5 Basket case 75 K10 Rescue Parting out 77 MG Midget Parting out 15 6.7L Cummins

07-09-2007, 03:01 PM	#37
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: I have another 69 C20 that needs parted Did u sell the hubcaps? __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

07-09-2007, 03:55 PM	#38
424shee Registered User Join Date: Feb 2006 Location: kelso,wa Posts: 55	Re: I have another 69 C20 that needs parted I'm intrested in the core support if you would ship it to 98626.depending on the price.thanks

07-09-2007, 04:03 PM	#39
Walts_restoration Real Projects never die Join Date: Jan 2007 Location: Lawrence, kansas Posts: 1,508	Re: I have another 69 C20 that needs parted the air compresser sitting on the right side floorboard, that the same for an 86? V belt pulley on it, if so im intereested pending cost and shipping __________________ Ill put it this way, ive got a few lawn ornaments My name tag says Ryan KansasTwister On other forums

07-09-2007, 04:06 PM	#40
Walts_restoration Real Projects never die Join Date: Jan 2007 Location: Lawrence, kansas Posts: 1,508	Re: I have another 69 C20 that needs parted right there if you missed it __________________ Ill put it this way, ive got a few lawn ornaments My name tag says Ryan KansasTwister On other forums



Register or Log In To remove these advertisements.

07-09-2007, 06:10 PM	#41
BIGCHEVYMAN Senior Member Join Date: Apr 2002 Location: Portland , Tennessee , United States Posts: 1,024	Re: I have another 69 C20 that needs parted how much for the hood and do you have any pics of it?

07-10-2007, 12:17 PM	#42
WORNBRAKES Senior Member Join Date: Jul 2001 Location: Hughesville, MD Posts: 1,350	Re: I have another 69 C20 that needs parted Hubcaps are gone. 424- I will have to get a weight on it. I figure it wont be cheap all the way up to the NW. Walt- The guy I bought the trucks from said that the compressor come from a mid 80's Buick and that it worked fine. The mount brackets were also with it. I will need to get a look at it and weight it to get an accurate shipping quote. It is out on the farm. I will get out there soon. Bigchevyman- This truck did not have a hood however I have 5. They range from 10.00 up to 70.00. I will get pics as soon as I am out there. Thanks, Mario __________________ Mario and Mandy Hughesville, MD 20637 69 C10 305/350 71 K5 Basket case 75 K10 Rescue Parting out 77 MG Midget Parting out 15 6.7L Cummins

07-10-2007, 02:00 PM	#43
indyracer Registered User Join Date: Jul 2006 Location: Alexandria, IN Posts: 134	Re: I have another 69 C20 that needs parted How is the ignition and do you have a key? If you don't have a key, I really only need the bezel and spacer. How much to 46001? Attached Images __________________ Cheers, Tony A day without sunshine is like, you know, night. 1970 Chevy CST10 (Green) 2005 Silverado Z71 2000 Pontiac Bonneville

07-10-2007, 02:09 PM	#44
OLDIRON69 Registered User Join Date: Mar 2007 Location: Ben Wheeler,Texas Posts: 992	Re: I have another 69 C20 that needs parted If he passes on the core support, what do you need to get for it? It it rusted out under the battery tray? __________________ 05 2500HD 6.0 excab 69 LWB-Gone but not forgotten! 68 Dodge Charger 383/727 69 Dodge Charger-440/4spd

07-11-2007, 01:44 AM	#45
WORNBRAKES Senior Member Join Date: Jul 2001 Location: Hughesville, MD Posts: 1,350	Re: I have another 69 C20 that needs parted indyracer- I have the beazle and the back spacer that the beazle slides into. 10.00 shipped. Marlin, I will put you next in line. As for the rust, it did not look to bad and I will attach the only pic I have of it right now. I can get another pic later. As posted in the top of the thread, the aux battery tray is for the blazer. steering column is SOLD. __________________ Mario and Mandy Hughesville, MD 20637 69 C10 305/350 71 K5 Basket case 75 K10 Rescue Parting out 77 MG Midget Parting out 15 6.7L Cummins Last edited by WORNBRAKES; 07-11-2007 at 01:13 PM.

07-11-2007, 01:47 AM	#46
WORNBRAKES Senior Member Join Date: Jul 2001 Location: Hughesville, MD Posts: 1,350	Re: I have another 69 C20 that needs parted here it is Attached Images __________________ Mario and Mandy Hughesville, MD 20637 69 C10 305/350 71 K5 Basket case 75 K10 Rescue Parting out 77 MG Midget Parting out 15 6.7L Cummins

07-11-2007, 12:13 PM	#47
blazer72 Freedom isn't Free Join Date: Oct 2006 Location: OKC Posts: 393	Re: I have another 69 C20 that needs parted I would like a complete rolling 3/4 chassis - how much

07-11-2007, 01:06 PM	#48
Walts_restoration Real Projects never die Join Date: Jan 2007 Location: Lawrence, kansas Posts: 1,508	Re: I have another 69 C20 that needs parted keep me posted on the ac pump __________________ Ill put it this way, ive got a few lawn ornaments My name tag says Ryan KansasTwister On other forums

07-13-2007, 04:07 PM	#49
WORNBRAKES Senior Member Join Date: Jul 2001 Location: Hughesville, MD Posts: 1,350	Re: I have another 69 C20 that needs parted old gold, here are the pictures. PM was sent. On the hood and core support, my scale is broke and I cant get an accurate weight. Can anyone post the weight and dimentions of a hood and core support? Thanks walt, I am going to go get the pump and calculate shipping. What is your zip? Blazer 72, 350.00 on the rolling chassis. If needed, I could deliver in August to Oaklahoma City for a small fee. Thanks Attached Images __________________ Mario and Mandy Hughesville, MD 20637 69 C10 305/350 71 K5 Basket case 75 K10 Rescue Parting out 77 MG Midget Parting out 15 6.7L Cummins

07-13-2007, 06:54 PM	#50
Walts_restoration Real Projects never die Join Date: Jan 2007 Location: Lawrence, kansas Posts: 1,508	Re: I have another 69 C20 that needs parted Ryan Spencer 761 hwy 40 Lawrence, ks 66049 __________________ Ill put it this way, ive got a few lawn ornaments My name tag says Ryan KansasTwister On other forums

Register or Log In To remove these advertisements.