What kind of wheel is this? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

350C-10 · 12-13-2002, 10:43 PM

Well, pretty much what the subject says, does anyone know what type of wheel this is?
EDIT:tried postin the pic but i'm not that smart i guess, here is the address to the pic: http://autohobbypage.com/cgi-bin/_tr...ark/ark216.jpg

79Silv4x4 · 12-13-2002, 10:51 PM

Looks like a Halibrand Sprint II to me. However, i have been known to be wrong.

littlebubba · 12-13-2002, 10:55 PM

It is a HALIBRAND STYLE polished. Weld Wheels is making a very similar wheel called a RODLITE. Can't tell in the pic what the center cap says, so I'm guessing. Many of the wheel companies have copied the Halibrand. Might be a BOYD's too. Check some of the wheel ads and seee what you think.

bigblock73 · 12-14-2002, 12:31 AM

The logo on the center cap LOOKS like it might say Weld...making them rodlites if that is the case.

-Jeff

87 STEPPER · 12-14-2002, 08:46 PM

Quote:

Originally posted by bigblock73
The logo on the center cap LOOKS like it might say Weld...making them rodlites if that is the case.

-Jeff

Dude you must have some good vision cuz all i can make out is that there is some sort of name on them

ElGracho · 12-15-2002, 02:21 AM

I don't know about the wheels, but that is a damn nice truck!

LOHRTBT · 12-15-2002, 07:39 PM

http://cgi.ebay.com/ebaymotors/ws/eB...&category=6161
This is close..its a billet specialties.

gchemist · 12-15-2002, 08:12 PM

Lookin in the back of a www.summitracing.com magazine. I think I've seen them there.

J-Spec C10 · 12-16-2002, 02:50 AM

That is one hot truck! Its really straight.

SCOTI · 12-16-2002, 03:45 AM

Several companies make these wheels (or @ least their all very similar). I don't think they are 'Rodlites' though because the spokes/holes on 'Rodlites' are more rounded. Those could be Boyds, Billet Spec., Eric Vaugns Real Wheels, Halibrands, Eagles, and ET III's. My guess Boyds or Billet Spec. Legacy's.

12-13-2002, 10:43 PM	#1
350C-10 Registered User Join Date: Dec 2002 Posts: 6	What kind of wheel is this? Well, pretty much what the subject says, does anyone know what type of wheel this is? EDIT:tried postin the pic but i'm not that smart i guess, here is the address to the pic: http://autohobbypage.com/cgi-bin/_tr...ark/ark216.jpg __________________ 1984 Choo-Choo customs C-10 350/Auto, all stock for now

12-13-2002, 10:51 PM	#2
79Silv4x4 Workaholic Join Date: Oct 2002 Location: Katy, TX Posts: 1,589	Looks like a Halibrand Sprint II to me. However, i have been known to be wrong. __________________ 1979 K-10 Silverado (work in progress) 1991 V1500 Subruban 1999 Suburban LT 4x4 2006 Suburban LTZ (daily driver)

12-13-2002, 10:55 PM	#3
littlebubba Registered User Join Date: Jun 2002 Location: Clinton Twp., Michigan Posts: 321	Wheel ID It is a HALIBRAND STYLE polished. Weld Wheels is making a very similar wheel called a RODLITE. Can't tell in the pic what the center cap says, so I'm guessing. Many of the wheel companies have copied the Halibrand. Might be a BOYD's too. Check some of the wheel ads and seee what you think.

12-15-2002, 02:21 AM	#6
ElGracho Gentleman Jim Driver Join Date: Nov 2002 Location: Poulsbo, WA Posts: 1,553	I don't know about the wheels, but that is a damn nice truck! __________________ Joe '75 GMC Gentleman Jim '84 Chev C10 Short Wide - Super duper plain (manual steering, manual brakes, no dome light, no cig lighter) '85 Chev C10 Short Wide - Super plain Vortec 4.8 4L60E trans also: '81 K30, '83 C30 Crew Dually, '84 M1028 CUCV, '85 M1009 CUCV, another '85 C10 SWB, '89 R3500 Flatbed

12-15-2002, 07:39 PM	#7
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	http://cgi.ebay.com/ebaymotors/ws/eB...&category=6161 This is close..its a billet specialties. __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

12-14-2002, 12:31 AM	#4
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	The logo on the center cap LOOKS like it might say Weld...making them rodlites if that is the case. -Jeff

12-15-2002, 08:12 PM	#8
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Lookin in the back of a www.summitracing.com magazine. I think I've seen them there. __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

12-16-2002, 02:50 AM	#9
J-Spec C10 Whats this wire for?.... Join Date: Dec 2002 Location: Barrie, Ontario, CANADA Posts: 378	That is one hot truck! Its really straight. __________________ Kyle CANADIAN CONNECTION '82 C10 Resto-Custom--> * 2 1/4" manifold back dual exhaust with Hooker Aerochambers & High Flow Cats Taylor Ignition Wires Centerline 15" Telstars with 32"x10" mudders

12-16-2002, 03:45 AM	#10
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,068	Several companies make these wheels (or @ least their all very similar). I don't think they are 'Rodlites' though because the spokes/holes on 'Rodlites' are more rounded. Those could be Boyds, Billet Spec., Eric Vaugns Real Wheels, Halibrands, Eagles, and ET III's. My guess Boyds or Billet Spec. Legacy's. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.