Set of GM 8 bolt wheels - Caps - Lugnuts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**LockDoc** · 07-17-2007, 02:34 PM

-
Please reply in thread.

Complete set of four, 6.5x16 - 8 bolt wheels for '73-'87 Chevy. It is my understanding that these will fit the '67-'72 3/4 ton trucks also. This includes wheels, stainless trim rings, caps, and lugnut sets. (lugnuts and plastic retainers) Pic only shows 8 lugnuts/retainers but there is a full set.

These are like new! $50 for complete set, plus shipping...

I would rather have these picked up but would consider shipping.

Note: Member AH619 has first shot at these since he inquired about them on the 67-72 pickup board.

Thanks for looking.

LockDoc (Leon)

CrashBob · 07-18-2007, 08:15 AM

Where exactly in central Iowa are you? Also, could you get a price to ship to 68456? (Utica, Nebraska).
I really like those wheels and will buy if we can work out getting them from you to me at a reasonable cost. The cost of gas would probably make shipping cheaper than my driving over there.
Let me know.

Thanks,

Crash

home email: clsorensen@alltel.net

**Don Brace** · 07-18-2007, 09:12 AM

Are these sold yet?

**LockDoc** · 07-18-2007, 05:58 PM

Quote:

Originally Posted by CrashBob

Where exactly in central Iowa are you? Also, could you get a price to ship to 68456? (Utica, Nebraska).
I really like those wheels and will buy if we can work out getting them from you to me at a reasonable cost. The cost of gas would probably make shipping cheaper than my driving over there.
Let me know.

Thanks,

Crash

home email: clsorensen@alltel.net

Crash,

I'm 60 miles East of Des Moines, IA. I will get shipping figured in the morning for your ZIP.

LockDoc
.

CrashBob1 · 07-18-2007, 06:05 PM

Quote:

Originally Posted by LockDoc

Crash,

I'm 60 miles East of Des Moines, IA. I will get shipping figured in the morning for your ZIP.

LockDoc
.

I appreciate that! I'm afraid driving that far wouldn't be cost effective. I will check with you tomorrow.

Crash

**LockDoc** · 07-18-2007, 06:05 PM

Quote:

Originally Posted by Don Brace

Are these sold yet?

Don,

I've got a couple of people in line but I will keep you posted on the status.

Thanks.

LockDoc (Leon)

CrashBob · 07-19-2007, 02:37 PM

Quote:

Originally Posted by LockDoc

Crash,

I'm 60 miles East of Des Moines, IA. I will get shipping figured in the morning for your ZIP.

LockDoc
.

Hey Doc,
Had a chance to get a shipping quote? The little missus just got a $100 hair do so I'm good to go.

Crash

**LockDoc** · 07-19-2007, 08:32 PM

Quote:

Originally Posted by CrashBob

Hey Doc,
Had a chance to get a shipping quote? The little missus just got a $100 hair do so I'm good to go.

Crash

Bob,

The wheels boxed up weigh 40# ea. UPS would be $22.63 per wheel for a total of $90.52 shipping.

There is a DHL shipping center in Grinnell, IA (about 17 miles from me) and an online calculation says $14.80 per wheel for a total of $59.20 shipping. I would have to take one up there to confirm that though.

LockDoc (Leon)
.

CrashBob1 · 07-19-2007, 10:11 PM

Quote:

Originally Posted by LockDoc

Bob,

The wheels boxed up weigh 40# ea. UPS would be $22.63 per wheel for a total of $90.52 shipping.

There is a DHL shipping center in Grinnell, IA (about 17 miles from me) and an online calculation says $14.80 per wheel for a total of $59.20 shipping. I would have to take one up there to confirm that though.

LockDoc (Leon)
.

Leon,

If we can get it done for $110.00, you've got a deal. Either PM me or call me @ 402-362-8514 7:00 am to 4:00 pm or 402-534-3472 after 5:00 pm so we can work out the details.

Thanks,
CrashBob (Craig)

**LockDoc** · 07-19-2007, 10:56 PM

Quote:

Originally Posted by CrashBob1

Leon,

If we can get it done for $110.00, you've got a deal. Either PM me or call me @ 402-362-8514 7:00 am to 4:00 pm or 402-534-3472 after 5:00 pm so we can work out the details.

Thanks,
CrashBob (Craig)

PM sent.

LockDoc
\

**LockDoc** · 07-20-2007, 05:53 PM

-
Sold to CrashBob1 pending payment. Thanks.

LockDoc

CrashBob1 · 07-21-2007, 05:45 PM

Quote:

Originally Posted by LockDoc

-
Sold to CrashBob1 pending payment. Thanks.

LockDoc

Put the money in the mail this am!

Crash

**LockDoc** · 07-24-2007, 10:53 AM

-
Shipped the wheels out this morning....

Thanks Craig.

LockDoc

CrashBob · 07-24-2007, 11:45 AM

Quote:

Originally Posted by LockDoc

-
Shipped the wheels out this morning....

Thanks Craig.

LockDoc

Thanks back at you! I think those wheels will be a great improvement over what I have now. Can't wait to get them!

CrashBob

07-17-2007, 02:34 PM	#1
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,935	Set of GM 8 bolt wheels - Caps - Lugnuts SOLD - Please reply in thread. Complete set of four, 6.5x16 - 8 bolt wheels for '73-'87 Chevy. It is my understanding that these will fit the '67-'72 3/4 ton trucks also. This includes wheels, stainless trim rings, caps, and lugnut sets. (lugnuts and plastic retainers) Pic only shows 8 lugnuts/retainers but there is a full set. These are like new! $50 for complete set, plus shipping... I would rather have these picked up but would consider shipping. Note: Member AH619 has first shot at these since he inquired about them on the 67-72 pickup board. Thanks for looking. LockDoc (Leon) Attached Images __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - Last edited by LockDoc; 07-24-2007 at 10:52 AM. Reason: Wheels Sold

07-18-2007, 08:15 AM	#2
CrashBob Registered User Join Date: Jun 2004 Location: Utica Nebraska Posts: 244	Re: Set of GM 8 bolt wheels - Caps - Lugnuts Where exactly in central Iowa are you? Also, could you get a price to ship to 68456? (Utica, Nebraska). I really like those wheels and will buy if we can work out getting them from you to me at a reasonable cost. The cost of gas would probably make shipping cheaper than my driving over there. Let me know. Thanks, Crash home email: clsorensen@alltel.net

07-18-2007, 09:12 AM	#3
Don Brace Active Member Join Date: Nov 2002 Location: Clarks Grove MN Posts: 487	Re: Set of GM 8 bolt wheels - Caps - Lugnuts Are these sold yet? __________________ Don Brace 55 Nomad 56 Nomad 58 Impalla Coupe 58 Bel-Aire 4D HT 61 Impala CVRT 409 4 SP 2- 71 Longhorns Always looking for old toy trains, Juke boxes Pin ball and game machines.

07-20-2007, 05:53 PM	#11
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,935	Re: Set of GM 8 bolt wheels - Caps - Lugnuts - Sold to CrashBob1 pending payment. Thanks. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

07-24-2007, 10:53 AM	#13
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,935	Re: Set of GM 8 bolt wheels - Caps - Lugnuts - Shipped the wheels out this morning.... Thanks Craig. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.