Air Ride

[edflores]

if you wanna show off, do the viair 480's with at least 1/2 inch line. 200 psi compared to 150 is a big difference. if you dont care about speed, run one of the manifolds that kp carries. you may want an engine driven comp if you play a lot. that would be faster than any electric compressor out there.

[Gimix]

Originally Posted by edflores

if you wanna show off, do the viair 480's with at least 1/2 inch line. 200 psi compared to 150 is a big difference. if you dont care about speed, run one of the manifolds that kp carries. you may want an engine driven comp if you play a lot. that would be faster than any electric compressor out there.

What do you mean by show off? what would you recommend running for someone who just wants it to look good(slammed), be quite, and ride well?

[culookn]

i would jsut piece a kit together b/c you often get a better quality/faster setup

[edflores]

Originally Posted by Gimix

What do you mean by show off? what would you recommend running for someone who just wants it to look good(slammed), be quite, and ride well?

show off like snap your front up quick hit side to side etc. if you just want to look good, go with a setup like the one kp(Kontrol Phreaks) suggested bt maybe add some mufflers on the dumps to give you better control and quiet it down a little

[Gimix]

Originally Posted by edflores

show off like snap your front up quick hit side to side etc. if you just want to look good, go with a setup like the one kp(Kontrol Phreaks) suggested bt maybe add some mufflers on the dumps to give you better control and quiet it down a little

That's what I thought. To much for me

[LUV2XCLR8]

Originally Posted by Kontrol Phreaks

You'll still need to run an upper mount to locate the bag, but the lower
doesn't require a cup since the bag bolts directly to the lower control arm.

Is this for all bags? I'm wanting to remove my cups (Tall) and I was considering
going to the short ones, but if LCA's require no cups? I wanna go that route

*Edit: BTW, How much lower will I get from just that 1", 2", maybe even 3" ???