A arm shaft/bushings install? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bad6772 · 09-23-2007, 08:17 PM

i got everything to get my front suspesion. completely rebuilt. upper /lower ball joints> upper/lower shafts/bushings......my question is what is the correct way to install the upper lower shafts,? when i put the shafts in how do i got about centering everything up? any help would be great thank you tony

bad6772 · 09-25-2007, 09:01 PM

Is this just a dumb question? or know body knows?

SCOTI · 09-25-2007, 11:26 PM

I can't answer about the 'correct' way to install the bushings on the shafts since I have no formal GM training.

I can say I install them trying to keep everything as centered as possible & have never had a problem (I've put together front ends on @ least a dozen 64~87 trucks).

Anything more specific you need to know?

bad6772 · 09-26-2007, 06:26 AM

thanks scotti all i needed

b&a72 · 09-26-2007, 12:13 PM

I did mine as best as I could and then took it down to the alignment shop and let them do the rest.

jlaird · 09-26-2007, 03:35 PM

Quote:

Originally Posted by b&a72

I did mine as best as I could and then took it down to the alignment shop and let them do the rest.

09-23-2007, 08:17 PM	#1
bad6772 Official Site Guitar Shredder Join Date: May 2006 Location: Oz Posts: 3,955	A arm shaft/bushings install? i got everything to get my front suspesion. completely rebuilt. upper /lower ball joints> upper/lower shafts/bushings......my question is what is the correct way to install the upper lower shafts,? when i put the shafts in how do i got about centering everything up? any help would be great thank you tony Last edited by bad6772; 09-23-2007 at 08:18 PM.

09-25-2007, 09:01 PM	#2
bad6772 Official Site Guitar Shredder Join Date: May 2006 Location: Oz Posts: 3,955	Re: A arm shaft/bushings install? Is this just a dumb question? or know body knows?

09-25-2007, 11:26 PM	#3
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,068	Re: A arm shaft/bushings install? I can't answer about the 'correct' way to install the bushings on the shafts since I have no formal GM training. I can say I install them trying to keep everything as centered as possible & have never had a problem (I've put together front ends on @ least a dozen 64~87 trucks). Anything more specific you need to know? __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

09-26-2007, 06:26 AM	#4
bad6772 Official Site Guitar Shredder Join Date: May 2006 Location: Oz Posts: 3,955	Re: A arm shaft/bushings install? thanks scotti all i needed

09-26-2007, 12:13 PM	#5
b&a72 Active Member Join Date: Oct 2006 Location: Mesa, AZ Posts: 682	Re: A arm shaft/bushings install? I did mine as best as I could and then took it down to the alignment shop and let them do the rest.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.