Help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dhughins · 10-28-2007, 04:06 PM

i bought new calipers and put them on and the passenger brake line is not working. it was not leaking when i unhooked it so i got a new one. but i cant get the old one unhooked where it meets the frame. any ideas?

beaterC10 · 10-28-2007, 04:30 PM

What exactly is the problem. There is a hardline that attaches to the hose on the inside of the frame rail. Is the nut frozen into the end of the hose? Is the hose end frozen into the frame rail?

87rado · 10-28-2007, 04:47 PM

You will probably end up needing a set of line wrenches. You can make your own if you have some extra box ends. You need to use good wrenches though. Cheap Chinese won't cut the mustard.

**old Rusty C10** · 10-28-2007, 04:55 PM

theres a clip that holds it to the frame rail and a hard metal line that bolts into it. due to the position its a PITA without a lift to get to

dhughins · 10-28-2007, 04:56 PM

i have a line wrench but cant get it on the insinde of the frame rail.

dhughins · 10-28-2007, 04:59 PM

i have a 79 and i dont see the c clamp that the other threads were talking about. i cant get a wrench on the nut on the inside of the frame rail. i'm thinking about cutting the outside of the screw where it goes in the frame with a grinder. then maybe i can pull the rest through the frame. i'm worried i'll have to replace the hardline also. how much is a proportioning valve? what size nut is on the end of the hardline?

10-28-2007, 04:06 PM	#1
dhughins Registered User Join Date: Aug 2007 Location: ozark, al Posts: 583	Help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! i bought new calipers and put them on and the passenger brake line is not working. it was not leaking when i unhooked it so i got a new one. but i cant get the old one unhooked where it meets the frame. any ideas?

10-28-2007, 04:30 PM	#2
beaterC10 Senior Member Join Date: Jul 2003 Location: Indianapolis, IN Posts: 1,277	Re: Help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! What exactly is the problem. There is a hardline that attaches to the hose on the inside of the frame rail. Is the nut frozen into the end of the hose? Is the hose end frozen into the frame rail?

10-28-2007, 04:47 PM	#3
87rado Registered User Join Date: Oct 2007 Location: Elsanor, Alabama Posts: 35	Re: Help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! You will probably end up needing a set of line wrenches. You can make your own if you have some extra box ends. You need to use good wrenches though. Cheap Chinese won't cut the mustard. __________________ Lee

10-28-2007, 04:55 PM	#4
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	Re: Help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! theres a clip that holds it to the frame rail and a hard metal line that bolts into it. due to the position its a PITA without a lift to get to __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

10-28-2007, 04:56 PM	#5
dhughins Registered User Join Date: Aug 2007 Location: ozark, al Posts: 583	Re: Help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! i have a line wrench but cant get it on the insinde of the frame rail.

10-28-2007, 04:59 PM	#6
dhughins Registered User Join Date: Aug 2007 Location: ozark, al Posts: 583	Re: Help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! i have a 79 and i dont see the c clamp that the other threads were talking about. i cant get a wrench on the nut on the inside of the frame rail. i'm thinking about cutting the outside of the screw where it goes in the frame with a grinder. then maybe i can pull the rest through the frame. i'm worried i'll have to replace the hardline also. how much is a proportioning valve? what size nut is on the end of the hardline?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.