11-11-2007, 05:41 PM | #1 |
Registered User
Join Date: Oct 2007
Location: Rowlett,Tx
Posts: 64
|
Choke idle
Recently, when starting my truck up cold, the fast idle feels a little too high. Especially in park or nuetral..It takes a pretty long time to idle back down also. About how long should it take to kick all the way down to normal? Where do I go about adjusting this stuff? Its got a 305 and a quadrajet btw..Thanks
|
11-12-2007, 12:09 AM | #2 |
Right on the line, baby!
Join Date: Oct 2003
Location: Phila, PA 19130
Posts: 1,486
|
Re: Choke idle
Fast idle speed adjustment is the phillips head screw on the right (pass) side. What changed to make it idle faster?
__________________
83 GMC 406 th400/3.73 Eaton Truetrac posi, headers, x pipe, & racePros. Tubular control arms, lowering rear springs, caltracs. Still ugly, but getting built right, although slowly Click and scroll down for site vendors! Subscribe here! |
11-12-2007, 12:37 AM | #3 |
Registered User
Join Date: Oct 2007
Location: Rowlett,Tx
Posts: 64
|
Re: Choke idle
Thanks, Its gotten colder in the past week and now it just seems the fast idle is even higher than it was before..It only does it when its below 60 degrees, anything warmer and it stays at the normal fast idle.
|
11-12-2007, 07:38 AM | #4 |
Registered User
Join Date: Oct 2007
Location: Elsanor, Alabama
Posts: 35
|
Re: Choke idle
Ohh, I don't care for electric chokes. It sounds like yours needs to be tweaked some though. Make sure the linkage and all to the intake are still connected. It may just be a matter of loosening the cap screws and turning the cap a tad one way or the other. Manual chokes rule.
__________________
Lee |
11-12-2007, 04:30 PM | #5 | |
Right on the line, baby!
Join Date: Oct 2003
Location: Phila, PA 19130
Posts: 1,486
|
Re: Choke idle
Quote:
If you're interested in learning more about the Q-Jet, other than asking in the Engines & Drivetrain forum, check out Doug Roe's Q-Jet bible, Rochester Carburetors. You'll get all the info you'll ever need. I bought mine used on Amazon. Maybe $12 shipped.
__________________
83 GMC 406 th400/3.73 Eaton Truetrac posi, headers, x pipe, & racePros. Tubular control arms, lowering rear springs, caltracs. Still ugly, but getting built right, although slowly Click and scroll down for site vendors! Subscribe here! |
|
Bookmarks |
|
|