Project: 65 C-10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Slmd92DIME · 12-05-2007, 12:02 PM

I have been workin on my 65 C-10 for about a years time now... The frame has been z'd 4 inches and the cab mounts have been lowered an inch. The rear is notched with the factory trailing arms repostitioned. recently I have shaved the firewall and just doing minor work to the cab.. New inner rockers, rockers, and cab corners... I hope to set the cab on the frame within the next few weeks.. maybe over Christmas break Let me know what all of you think about it..

Tranny crossmember

Sorry about so many pics just wanted to let everyone know where I am at on this project..... Let me know what you think about everything...

Slmd92DIME · 12-05-2007, 12:06 PM

David Flores · 12-05-2007, 02:47 PM

bad ass man. Nice work.

Rokcrln · 12-05-2007, 10:16 PM

Looking good. I like that you added reinforcment to the front Z behind the motor. I have seen to many that just plate the out side and leave it at that. What did you do for the very front? Lets see some more pics. I just picked up a 63 so I am looking for all the pics I can get.

Kevin
LFD inc.

Slmd92DIME · 12-05-2007, 10:34 PM

The very front was cut and I cut a 8 inch piece of strap to hold everything back together...

We flipped the frame over and smoothed the bottom side of the plating also..

L0WRIDE · 12-05-2007, 10:52 PM

very nice

72BlckButy · 12-05-2007, 11:06 PM

that thing looks great so far.

PBFAB.COM · 12-05-2007, 11:28 PM

Looks like it's almost time to throw some sheetmetal on it!

nd72c10 · 12-05-2007, 11:44 PM

That seriously looks like its been very time consuming, but it will be 100% worth it in the end. That '65 is going to be badass

63 & 64 Bowties · 12-06-2007, 04:12 AM

Nice work. You should post this over on the 60-66 forum.

Slmd92DIME · 12-06-2007, 08:42 AM

Thanks for the comments guys... The frame has sat outside all summer and fall so Ineed to bring it in and clean it up and paint it again.. Inside the framerails and all.. Have to put a rear cab mount on the cab and then I will be setting it on the frame... I dont get too much work done to it.. I am in college and reallly dont have the time to mess with it too much but I try as much as I can.... Thanks for the comments it gets me motivated...

**N2TRUX** · 12-06-2007, 10:12 AM

Nice progress. That firewall is going to make a huge difference. Keep the pics coming.

Slmd92DIME · 12-07-2007, 03:52 PM

I really hope the firewall helps a lot. It was a lot of work.... Could one of the administrators put this thread in the 60-66 forum? If one could do that I would really appreciate it

WELD4DAYS · 12-07-2007, 04:30 PM

Nice job.You got some work done.Can't wait to see more progress pics.

Slmd92DIME · 12-07-2007, 07:15 PM

I got my rear cab mount in yesterday so I hope to roll the cab on its back and pu tit in this week... then set the motor and tranny in and set the cab on, cut the tranny and driveshaft tunnel, raise it to where it needs to be, tack it up, pull the cab back off and weld it up good.... after that the cab we be on for good
Thanks for the commentsguys

Slmd92DIME · 12-08-2007, 03:15 PM

Worked on the cab new inner rockers, rockers, cab corners.

Rokcrln · 12-08-2007, 06:33 PM

Looks good! I look forward to starting my 63 GMC and getting it down to bare metal. I love how they look in the nude!

Kevin
LFD Inc.

FRENCHBLUE72 · 12-08-2007, 06:51 PM

Thats gonna be one bad ride...

L0WRIDE · 12-08-2007, 08:29 PM

Quote:

Originally Posted by Rokcrln

Looks good! I look forward to starting my 63 GMC and getting it down to bare metal. I love how they look in the nude!

Kevin
LFD Inc.

yes they do look good nude

good work

joehalford01 · 12-09-2007, 02:09 PM

Quote:

Originally Posted by L0WRIDE

yes they do look good nude

good work

dosn't everything.......

Slmd92DIME · 12-09-2007, 02:47 PM

For Sure

Slmd92DIME · 12-24-2007, 12:38 PM

Well finally rolled the frame back in.. I got my bushings yesterday..

Also I did some work on the doors while I was waitin on the cab bushings..
Before

After..

Lots more progress in the next few weeks..... Thanks for lookin guys

see ten · 12-24-2007, 02:28 PM

Lookin good!

63 & 64 Bowties · 12-24-2007, 09:58 PM

Slmd92DIME, what part of WV do you live? I'm near Roanoke. And, I see you're online now (2:45 AM) what's up with that? I've got an excuse, I'm at work.

duane67c-10 · 12-25-2007, 03:38 AM

looks killer!! man that door was solid bondo!

12-05-2007, 12:02 PM	#1
Slmd92DIME Registered User Join Date: Mar 2007 Location: West Virginia Posts: 481	Project: 65 C-10 I have been workin on my 65 C-10 for about a years time now... The frame has been z'd 4 inches and the cab mounts have been lowered an inch. The rear is notched with the factory trailing arms repostitioned. recently I have shaved the firewall and just doing minor work to the cab.. New inner rockers, rockers, and cab corners... I hope to set the cab on the frame within the next few weeks.. maybe over Christmas break Let me know what all of you think about it.. Tranny crossmember Sorry about so many pics just wanted to let everyone know where I am at on this project..... Let me know what you think about everything...

12-05-2007, 12:06 PM	#2
Slmd92DIME Registered User Join Date: Mar 2007 Location: West Virginia Posts: 481	Re: Project: 65 C-10

12-05-2007, 02:47 PM	#3
David Flores Registered User Join Date: May 2007 Location: Temple Texas Posts: 399	Re: Project: 65 C-10 bad ass man. Nice work. __________________ 66 c10 swbfs My Build.

12-05-2007, 10:16 PM	#4
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: Project: 65 C-10 Looking good. I like that you added reinforcment to the front Z behind the motor. I have seen to many that just plate the out side and leave it at that. What did you do for the very front? Lets see some more pics. I just picked up a 63 so I am looking for all the pics I can get. Kevin LFD inc.

12-05-2007, 10:34 PM	#5
Slmd92DIME Registered User Join Date: Mar 2007 Location: West Virginia Posts: 481	Re: Project: 65 C-10 The very front was cut and I cut a 8 inch piece of strap to hold everything back together... We flipped the frame over and smoothed the bottom side of the plating also..

12-05-2007, 10:52 PM	#6
L0WRIDE Registered User Join Date: Jan 2005 Location: AUCKLAND, NEW ZEALAND Posts: 2,166	Re: Project: 65 C-10 very nice __________________ 49 CHEVROLET 1/2 TON, 52 CHEVROLET SEDAN 62 HARDTOP NOVA 65 CHEVROLET BB LWB FLEETSIDE 90 CHEVROLET EXTRA CAB CHEVY ONLY - NZ Chapter http://67-72chevytrucks.com/vboard/s...d.php?t=137984

12-05-2007, 11:06 PM	#7
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Project: 65 C-10 that thing looks great so far. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

12-05-2007, 11:28 PM	#8
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: Project: 65 C-10 Looks like it's almost time to throw some sheetmetal on it! __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

12-05-2007, 11:44 PM	#9
nd72c10 Registered User Join Date: May 2007 Location: north dakota Posts: 26	Re: Project: 65 C-10 That seriously looks like its been very time consuming, but it will be 100% worth it in the end. That '65 is going to be badass __________________ -------------------------- '72 C10 - 350, TH350 - blown headgasket, under construction '84 K5 Blazer - 305, 700R4, Serpentine conversion, DD '97 Tahoe 2DR 4X4 - 350, 4L60E, 3.73, SPORT

12-06-2007, 04:12 AM	#10
63 & 64 Bowties and a few others Join Date: Jun 2007 Location: Blue Ridge Mountains of VA Posts: 5,638	Re: Project: 65 C-10 Nice work. You should post this over on the 60-66 forum. __________________ Bill US Army Vet -193rd Infantry BlueRidgeMuscleCars.com “The greatness of a nation and its moral progress can be judged by the way its animals are treated” Gandhi

12-06-2007, 08:42 AM	#11
Slmd92DIME Registered User Join Date: Mar 2007 Location: West Virginia Posts: 481	Re: Project: 65 C-10 Thanks for the comments guys... The frame has sat outside all summer and fall so Ineed to bring it in and clean it up and paint it again.. Inside the framerails and all.. Have to put a rear cab mount on the cab and then I will be setting it on the frame... I dont get too much work done to it.. I am in college and reallly dont have the time to mess with it too much but I try as much as I can.... Thanks for the comments it gets me motivated...

12-06-2007, 10:12 AM	#12
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: Project: 65 C-10 Nice progress. That firewall is going to make a huge difference. Keep the pics coming. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

12-07-2007, 03:52 PM	#13
Slmd92DIME Registered User Join Date: Mar 2007 Location: West Virginia Posts: 481	Re: Project: 65 C-10 I really hope the firewall helps a lot. It was a lot of work.... Could one of the administrators put this thread in the 60-66 forum? If one could do that I would really appreciate it

12-07-2007, 04:30 PM	#14
WELD4DAYS Registered User Join Date: Nov 2007 Location: Phoenix,AZ Posts: 107	Re: Project: 65 C-10 Nice job.You got some work done.Can't wait to see more progress pics.

12-07-2007, 07:15 PM	#15
Slmd92DIME Registered User Join Date: Mar 2007 Location: West Virginia Posts: 481	Re: Project: 65 C-10 I got my rear cab mount in yesterday so I hope to roll the cab on its back and pu tit in this week... then set the motor and tranny in and set the cab on, cut the tranny and driveshaft tunnel, raise it to where it needs to be, tack it up, pull the cab back off and weld it up good.... after that the cab we be on for good Thanks for the commentsguys



Register or Log In To remove these advertisements.

12-08-2007, 03:15 PM	#16
Slmd92DIME Registered User Join Date: Mar 2007 Location: West Virginia Posts: 481	Re: Project: 65 C-10 Worked on the cab new inner rockers, rockers, cab corners.

12-08-2007, 06:33 PM	#17
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: Project: 65 C-10 Looks good! I look forward to starting my 63 GMC and getting it down to bare metal. I love how they look in the nude! Kevin LFD Inc.

12-08-2007, 06:51 PM	#18
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Project: 65 C-10 Thats gonna be one bad ride... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

12-09-2007, 02:47 PM	#21
Slmd92DIME Registered User Join Date: Mar 2007 Location: West Virginia Posts: 481	Re: Project: 65 C-10 For Sure

12-24-2007, 12:38 PM	#22
Slmd92DIME Registered User Join Date: Mar 2007 Location: West Virginia Posts: 481	Re: Project: 65 C-10 Well finally rolled the frame back in.. I got my bushings yesterday.. Also I did some work on the doors while I was waitin on the cab bushings.. Before After.. Lots more progress in the next few weeks..... Thanks for lookin guys

12-24-2007, 02:28 PM	#23
see ten WTB this ad Join Date: Sep 2004 Location: Lafayette Georgia Posts: 5,074	Re: Project: 65 C-10 Lookin good!

12-24-2007, 09:58 PM	#24
63 & 64 Bowties and a few others Join Date: Jun 2007 Location: Blue Ridge Mountains of VA Posts: 5,638	Re: Project: 65 C-10 Slmd92DIME, what part of WV do you live? I'm near Roanoke. And, I see you're online now (2:45 AM) what's up with that? I've got an excuse, I'm at work. __________________ Bill US Army Vet -193rd Infantry BlueRidgeMuscleCars.com “The greatness of a nation and its moral progress can be judged by the way its animals are treated” Gandhi

12-25-2007, 03:38 AM	#25
duane67c-10 Registered User Join Date: Oct 2007 Location: fairview tennessee Posts: 122	Re: Project: 65 C-10 looks killer!! man that door was solid bondo!

Register or Log In To remove these advertisements.