The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1969 - 1972 Blazers and Jimmys Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-24-2008, 12:58 PM   #1
BLUE THUNDER
Registered User
 
BLUE THUNDER's Avatar
 
Join Date: May 2007
Location: San Antonio
Posts: 993
need to know if.......

Hey guys i was wondering if a set of lift springs from an '89 blazer will fit my '72? It's a rough country 6" lift going pretty cheap. Just wanted to know. Thanks guys.
BLUE THUNDER is offline   Reply With Quote
Old 01-24-2008, 12:59 PM   #2
1969k10stepside
Registered User
 
Join Date: Mar 2006
Location: USA
Posts: 21,019
Re: need to know if.......

It will work but the front springs are longer and will hit the frame.You might get by with using a longer front shackle but I'd just do it right and get a 69-72 lift.If it has lift rear springs they won't work on a gen 1 blazer,and if it has blocks stay away! 6" lift blocks are not recommended.I would just look for a lift kit for a 69-72...

Last edited by 1969k10stepside; 01-24-2008 at 01:11 PM.
1969k10stepside is offline   Reply With Quote
Old 01-24-2008, 01:43 PM   #3
BLUE THUNDER
Registered User
 
BLUE THUNDER's Avatar
 
Join Date: May 2007
Location: San Antonio
Posts: 993
Re: need to know if.......

Thanks dude. Mario
BLUE THUNDER is offline   Reply With Quote
Old 01-24-2008, 07:39 PM   #4
vtblazer
Registered User
 
vtblazer's Avatar
 
Join Date: Oct 2003
Location: Central Vermont
Posts: 8,537
Re: need to know if.......

Move your spring mount location, guys do it all the time to allow for the longer, softer, better flexing late model leafs to fit.
vtblazer is offline   Reply With Quote
Old 01-25-2008, 03:10 AM   #5
AJs72K5
Registered User
 
AJs72K5's Avatar
 
Join Date: Nov 2007
Location: South Tx
Posts: 1,083
Re: need to know if.......

Quote:
Originally Posted by vtblazer View Post
Move your spring mount location, guys do it all the time to allow for the longer, softer, better flexing late model leafs to fit.
Kurt's right on here. But I think moving the spring mounts is more than you want to take on right now. Save your money right now and get the engine swap done and running. You do want to drive this truck eventually, right?

If you wanna go big, I'll sell you my 8" Superlift springs when they come off my ride. Things you need to consider with a 6" lift, or more, is that it's not just springs. You'll need extended brake lines, corrected steering (which means drop pitman, drop draglink, raised steering arm, or a combination of these), and of course tires. All add up to more $$$.
__________________
- AJ

Gray Matter Build - 1972 K5 with some stuff
AJs72K5 is offline   Reply With Quote
Old 01-26-2008, 06:20 AM   #6
Jtrux
I'm a poor spectator
 
Jtrux's Avatar
 
Join Date: Aug 2006
Location: San Antonio, Tx
Posts: 2,287
Re: need to know if.......

AJ is dead on here. Don't worry about lift kits, tires, or anything that doesn't involve engine swap. It's been several months and you haven't been making any progress on the swap. That's what you should focus on.

I couldn't get a lift for you but that shouldn't stop you, go get one however you have to do it and pick up a 15 or 20 dollar chilton's manual as well. EVERYTHING you need to know will be there, i've used them a million times just as other people here have, it will definitely be worth the couple bucks. It's almost february and the big blazer invasion you planned is coming up and you will not be allowed to show up to your own event without YOUR blazer, no bumming rides and no driving your Jeep Grand Cherokee once again to a BLAZER event.
__________________
2006 Jeep Unlimited IMPACT ORANGE

1993 Chevy 2500 4x4 ExCab LWB 454/NV4500 Tow rig

1977 Ford F100 2x4 LWB 1st truck I owned, still have it!!!

1979 Ford F150 4x4 SWB Built Ford Tough!!!

1971 Chevy Blazer 350 / SM465 / NP205 UNDER CONSTRUCTION Soon to have a LQ4 6.0!!!
Jtrux is offline   Reply With Quote
Old 01-26-2008, 10:32 AM   #7
BLUE THUNDER
Registered User
 
BLUE THUNDER's Avatar
 
Join Date: May 2007
Location: San Antonio
Posts: 993
Re: need to know if.......

Yeah, Yeah, I knew you'd be bustin' my chops sooner or later about that. Ol' Yeller will be at the Blazer meet. Guaranteed it will be there. So uh.. what time you comming over Saturday to help out? BTW, thanks for keeping an eye out for a hoist. I guess i'm gonna have to break down and buy one.
BLUE THUNDER is offline   Reply With Quote
Old 01-28-2008, 02:17 AM   #8
bigbadchev72
People know me
 
bigbadchev72's Avatar
 
Join Date: Jun 2007
Location: Hermiston, oregon
Posts: 840
Re: need to know if.......

i am running 8" springs from my 84 shortbox, and the 6" springs from the rear with no problems, the previous owner installed some longer shackles in the rear

__________________
1972 k/5 blazer CST 4X4 Crate 350, th350/205, dana44with trac-loc/14 bolt with detroit locker, 4 wheel discs 4.56s, 8" suspension lift using 73-87springs, 1" zerorate custom front crossmember, HAD CV drivelines and driveshaft e-brake, full cage, PRP seats, Full autometer gauges, 38x14.5x16 Toyo M/Ts, 16x10 Polished aluminum rockcrusher wheels

1967 longbox 4x4, Strong 400/400/208, 44/12bolt 4.10s, 6" lift, 35" Toyo M/Ts on corvette rally wheels
bigbadchev72 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:17 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com