|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
03-07-2008, 05:27 AM
|
#1 |
|
Registered User
Join Date: Dec 2007
Location: PA
Posts: 326
|
Opinions before I start cutting!
Hi all, I am getting ready to Z my frame thanks to all the help I have gotten on this forum. Before I cut I wanted to see if everyone thinks this looks right. I leveled the frame, Measured back from the cross member and made a vertical line as seen in the photo(sorry its dark but it wouldn't let me upload the other ones). Then I made 2 horizontal lines. The bottom horizontal line will be brought up to the top horizontal line giving me a 4 inch drop. After you cut your frame how did you line up and support the front clip to tack everything up? Thanks again for the help!, Mark
|
|
|
|
03-07-2008, 06:20 AM
|
#2 | |
|
Seņor Member
Join Date: May 2002
Location: Edge of the world
Posts: 5,367
|
Re: Opinions before I start cutting!
Quote:
__________________
|
|
|
|
|
|
03-07-2008, 07:14 AM
|
#3 |
|
Registered User
Join Date: Feb 2007
Location: yuma arizona
Posts: 448
|
Re: Opinions before I start cutting!
i love how XXL always has a picture of something to always help someone look stupid or has a funny comment.. hahah a jack or some jackstands would also help..
|
|
|
|
|
03-07-2008, 07:32 AM
|
#4 |
|
I'M NOT SCARED I HAVE A PLASMA
Join Date: Feb 2008
Location: The PLACE
Posts: 172
|
Re: Opinions before I start cutting!
Get some cheap scissor jacks from a dodge caravan they will help you level the front end once it is cut. They are the best alot of junk yards will let you have them. Or you can take some tubing and make some legs. The big thing MAKE SURE IT IS NICE AND SQUARE! Then cut and don't look back.
__________________
Lou Santiago US Navy Retired/World Traveler Car Builder/Welder/Airport Investigator garageinsidertv.com [FORUM] WORK IS FOR PEOPLE WHO CAN'T FISH. I GUESS I'M SCREWED BECAUSED I HATE FISHING. |
|
|
|
|
03-07-2008, 08:24 AM
|
#5 | |
|
Registered User
Join Date: Dec 2007
Location: PA
Posts: 326
|
Re: Opinions before I start cutting!
Quote:
|
|
|
|
|
|
03-07-2008, 09:31 AM
|
#6 |
|
Signals in the bumper.
Join Date: Feb 2003
Location: East TN
Posts: 856
|
Re: Opinions before I start cutting!
Is your cab on or off?
__________________
Jeff C. 1981 Chevrolet Silverado - Under major construction...again. link 1962 Chevrolet Impala 4D Sedan moredoorclassics.com 1936 Ford Pickup - Frame-off in progress link 1979 Chevrolet Camper Special Flatbed link |
|
|
|
|
03-07-2008, 04:26 PM
|
#7 | |
|
Registered User
Join Date: Dec 2007
Location: PA
Posts: 326
|
Re: Opinions before I start cutting!
Quote:
My cab is off, It's down to the bare frame |
|
|
|
|
|
03-07-2008, 09:18 PM
|
#8 |
|
Registered User
Join Date: Feb 2007
Location: yuma arizona
Posts: 448
|
Re: Opinions before I start cutting!
i was the jackass that didnt listen to advise and tryed it with the engine still in.... i ended up taking it out but still found it alittle tough because the cab is still on....
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
