disk brakes on 3/4 ton? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

new2my62 · 01-22-2003, 01:35 AM

i am buying a 62gmc 3/4 ton. does anyone make a disk conversion for these? if so i am going to chrome the stock rims if not i might as well change everything out to 1/2 ton?

u2slow · 01-26-2003, 02:55 AM

On a '63-70 you can simply take the whole disc front suspension from a '71-87 truck and bolt it right in... 1/2-ton, 3/4-ton whatever.

'62 is torsion bar, so I'm not sure if its just as easy or not.

red450ih · 01-28-2003, 01:41 PM

I remember a web site where a guy put a 73-87 front cross member under his 62. I remember reading that it was pretty much a bolt in with the exception of drilling two holes. Maybe some one will come along and give you the web address.

Keith

kennyw · 01-29-2003, 02:56 PM

http://autos.groups.yahoo.com/group/6066_Chevy_Truck/

kennyw · 01-29-2003, 02:57 PM

Search thru the old messages and you will find what you need. You can bolt the 73-87 crossmember and complete front suspension into your truck. As a bonus since you have a 3/4 ton you dont have to change anything on your rear axle like the 1/2 ton guys do!

01-22-2003, 01:35 AM	#1
new2my62 Registered User Join Date: Jan 2003 Location: los angeles Posts: 8	disk brakes on 3/4 ton? i am buying a 62gmc 3/4 ton. does anyone make a disk conversion for these? if so i am going to chrome the stock rims if not i might as well change everything out to 1/2 ton?

01-26-2003, 02:55 AM	#2
u2slow Web Wheeler Join Date: Jan 2000 Location: BC, Canada, eh? Posts: 388	On a '63-70 you can simply take the whole disc front suspension from a '71-87 truck and bolt it right in... 1/2-ton, 3/4-ton whatever. '62 is torsion bar, so I'm not sure if its just as easy or not. __________________ '66 C10 longstep - Clifford equiped '84 C20 Suburban 6.2L - awaiting 4x4 conversion '91 V3500 Crewcab - awaiting diesel swap

01-29-2003, 02:56 PM	#4
kennyw N9PHW Join Date: Jan 2003 Location: PNW USA Posts: 136	http://autos.groups.yahoo.com/group/6066_Chevy_Truck/ __________________ "I got it one piece at a time and it didn't cost me a dime..."

01-29-2003, 02:57 PM	#5
kennyw N9PHW Join Date: Jan 2003 Location: PNW USA Posts: 136	Search thru the old messages and you will find what you need. You can bolt the 73-87 crossmember and complete front suspension into your truck. As a bonus since you have a 3/4 ton you dont have to change anything on your rear axle like the 1/2 ton guys do! __________________ "I got it one piece at a time and it didn't cost me a dime..."

01-28-2003, 01:41 PM	#3
red450ih Registered User Join Date: Mar 2001 Location: Nashville, Tennessee Posts: 225	I remember a web site where a guy put a 73-87 front cross member under his 62. I remember reading that it was pretty much a bolt in with the exception of drilling two holes. Maybe some one will come along and give you the web address. Keith



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.