|
01-16-2001, 12:52 PM
|
#1 |
|
Is a bullfrog waterproof?
Join Date: Nov 2000
Location: OLATHE, KANSAS
Posts: 1,130
|
Oil leak
I have an 86 suburban 1/2T 2WD that is leaking around the oil pan front & back. Sides are dry front to back. There is about 4 in. of clearance between the front of the pan and the crossmember. Will I have to raise the motor to replace the pan gasket? I'm going to use a 1pc. Felpro. I replaced the timing gear, chain and front oil seal about 75K ago. You can see where oil is leaking past the seal on the front of the pan. Any suggsetions??
__________________
"It is better to remain silent and be thought a fool, than to open one's mouth and remove all doubt." Ben Franklin __________________ 1970 Chevy shortbed 2002 Harley Custom Chopper (Long sucker) 1998 K2500 5.7L 5-speed Longbed 1st two are My son's toys...they just live in my garage! 1997 GMC K1500 Suburban 1993 S-10 Blazer 4D (youngest son's daily driver) 2000 Dodge Ram 4WD Ext. Cab (5.9L) Wife is a late year 1951 |
|
|
|
01-16-2001, 07:03 PM
|
#2 |
|
Registered User
Join Date: Mar 2000
Location: Clute, TX.
Posts: 1,935
|
you should have plenty of room to remove the oil pan with out lifting the motor , i do on my 85 C10.
------------------ 85 C10 350/700r4 HOLLEY STREET DOMINATOR IANTAKE EDELBROCK 1406 COMP. SERIES CARB. HYPERTECH POWER COIL FACTORY HEADERS MAGNAFLOW CAT/MUFFLER/3in. EXHAUST 3.42 REAR GEARS PROTHANE SUSPENSION-TOTAL KIT and still going "thats my toy" Jeff Dodson Angleton,Tx.
__________________
2004 Silverado Crewcab 1972 Chevy Monte Carlo 2017 Chevy Tahoe |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
