plastic dash clusters - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bbadfred · 01-16-2009, 07:08 PM

A few years ago I found a company that makes plastic dash inserts that you can use aftermarket gauges. I cannot find the link for this company again. Has anyone seen these? It was available in plain black plastic or carbon fiber. thanks. Fred S

70c10 · 01-16-2009, 07:13 PM

Here ya go!
http://www.covansclassic.com/parts/i...969.243.33.207

*Shane* · 01-16-2009, 07:43 PM

Good Luck if you try to email them with any questions ... I have tried about 6-7 times and have NEVER gotten a response.

Not much on customer service.

chevy_mike · 01-16-2009, 08:05 PM

Having seen a few different models of these in vehicles and talking to the owners of them, I would say good luck with the product. I have yet to run into anyone who would do it a second time.

bbadfred · 01-17-2009, 11:42 AM

Thanks guys!! I may just have to modify a stock one or get a billet one. With doing the lq9 engine/trans swap I want to use electronic programable speedo and tach. I would like to use 4 or 5 inch autometer ultra lites. with 4 smaller gauges.

extd56 · 01-18-2009, 12:25 AM

This is the one that I got for my 4L80E install in my 69

http://www.nolimit.net/prodinfo.asp?...DSH%2D6772%2DP

01-16-2009, 07:08 PM	#1
bbadfred bbadfred Join Date: Mar 2008 Location: rantoul Il Posts: 461	plastic dash clusters A few years ago I found a company that makes plastic dash inserts that you can use aftermarket gauges. I cannot find the link for this company again. Has anyone seen these? It was available in plain black plastic or carbon fiber. thanks. Fred S

01-16-2009, 07:13 PM	#2
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Re: plastic dash clusters Here ya go! http://www.covansclassic.com/parts/i...969.243.33.207 __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

01-16-2009, 07:43 PM	#3
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: plastic dash clusters Good Luck if you try to email them with any questions ... I have tried about 6-7 times and have NEVER gotten a response. Not much on customer service.

01-16-2009, 08:05 PM	#4
chevy_mike Never Ending Projects Join Date: Jul 2006 Location: San Diego, CA Posts: 3,836	Re: plastic dash clusters Having seen a few different models of these in vehicles and talking to the owners of them, I would say good luck with the product. I have yet to run into anyone who would do it a second time. __________________ . 1965 C10 Panel, Tiki Express http://www.67-72chevytrucks.com/vboa...d.php?t=506580 SOLD 1968 Chevy C10, Long, Fleetside, Hot Rod Hauler http://67-72chevytrucks.com/vboard/s...d.php?t=313233 SOLD 1965 Chevy C10, Long, Fleetside, Hot Rod C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415702 SOLD We were given two ears and one mouth for a reason... listen twice as much and speak half as often...

01-17-2009, 11:42 AM	#5
bbadfred bbadfred Join Date: Mar 2008 Location: rantoul Il Posts: 461	Re: plastic dash clusters Thanks guys!! I may just have to modify a stock one or get a billet one. With doing the lq9 engine/trans swap I want to use electronic programable speedo and tach. I would like to use 4 or 5 inch autometer ultra lites. with 4 smaller gauges.

01-18-2009, 12:25 AM	#6
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	Re: plastic dash clusters This is the one that I got for my 4L80E install in my 69 http://www.nolimit.net/prodinfo.asp?...DSH%2D6772%2DP



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.