Do they sell this???? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

pickupman96 · 02-18-2009, 08:48 PM

I was wondering if they sell or I can get inner and outer door skins for a 55 2nd. Also I need the front inner part of door where the hinges bolt to. The flat section on the inside is all beat and cut up from the PO. Thanks for the info.

stan3018 · 02-18-2009, 08:50 PM

Check on (lmc) you could check online or ask for a free catalog..

**truckdude239** · 02-18-2009, 09:09 PM

any vendor should be able to get them here is a list of the vendors

http://67-72chevytrucks.com/vboard/showgroups.php

OrrieG · 02-18-2009, 09:11 PM

I got my hinge pocket patch stuff from Mark-K, perfect fit.

pickupman96 · 02-18-2009, 09:14 PM

I have found stuff for the a-piller but I cant seem to find anything for the door where it goes to the a-piller. Thanks, I will check with the vendors also

OrrieG · 02-19-2009, 01:07 AM

Quote:

Originally Posted by pickupman96

I have found stuff for the a-piller but I cant seem to find anything for the door where it goes to the a-piller. Thanks, I will check with the vendors also

I misunderstood, I do not recall seeing any repro for the doors. You might need to fab something. Also check the classified section here, there were a couple of guys with lots of old trucks selling off parts. All the yards close to me have been picked dry. Sounds like you might have to fab something from scratch, the factory assembly manual has a pretty good section on how the pieces are all welded together so you can tell how to take it a part and what you need to make.

02-18-2009, 08:48 PM	#1
pickupman96 Registered User Join Date: Sep 2008 Location: Danbury, Ct Posts: 49	Do they sell this???? I was wondering if they sell or I can get inner and outer door skins for a 55 2nd. Also I need the front inner part of door where the hinges bolt to. The flat section on the inside is all beat and cut up from the PO. Thanks for the info. __________________ 72 Shortbed, fleetside, 4x4, 307,4spd. 55 second, 350, 4spd, almost done 77 K-20, 454, 4spd, plow truck 96 K-1500, 6 inch lift, 178k still going strong

02-18-2009, 08:50 PM	#2
stan3018 Registered User Join Date: Feb 2009 Location: bronx ny Posts: 167	Re: Do they sell this???? Check on (lmc) you could check online or ask for a free catalog..

02-18-2009, 09:09 PM	#3
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,237	Re: Do they sell this???? any vendor should be able to get them here is a list of the vendors http://67-72chevytrucks.com/vboard/showgroups.php __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

02-18-2009, 09:11 PM	#4
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: Do they sell this???? I got my hinge pocket patch stuff from Mark-K, perfect fit. __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project

02-18-2009, 09:14 PM	#5
pickupman96 Registered User Join Date: Sep 2008 Location: Danbury, Ct Posts: 49	Re: Do they sell this???? I have found stuff for the a-piller but I cant seem to find anything for the door where it goes to the a-piller. Thanks, I will check with the vendors also __________________ 72 Shortbed, fleetside, 4x4, 307,4spd. 55 second, 350, 4spd, almost done 77 K-20, 454, 4spd, plow truck 96 K-1500, 6 inch lift, 178k still going strong



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.