![]() |
![]() |
#1 |
Registered User
Join Date: Mar 2009
Location: Nampa ID
Posts: 19
|
NV4500 slave cylinder
Hello never posted before so here goes. Got a 72 4x4 on a 77 3/4 ton frame. Gm 383ht and i am putting a nv4500 behind it. Trans is out of a 95 3/4 ton pickup with an external slave cylinder. Does anyone know if the 96 and newer internal slave cylinder will bolt in. Reason I ask is my np208 is a passenger drop and i am worried about clearance between the front driveline and the slave cylinder when the suspension compresses. Any guidance would be much appreciated.
|
![]() |
![]() |
![]() |
#2 |
Designated A-hole!
Join Date: Mar 2003
Location: South Mississippi
Posts: 36,448
|
Re: NV4500 slave cylinder
I don't know but here's a ttt for you.
__________________
"If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. ![]() We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck" |
![]() |
![]() |
![]() |
#3 |
It's a catastrophic success.
![]() Join Date: Jan 2003
Location: Oklahoma
Posts: 2,077
|
Re: NV4500 slave cylinder
I dont think there is a mount on the older ones to hold the bearing assy.
They make an aftermarket one for older trannies but its like $500.00 |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Mar 2009
Location: Nampa ID
Posts: 19
|
Re: NV4500 slave cylinder
Thanks for the reply sneakysnake, any link to the aftermarket part? How does the setup in your picture mount to the trans?
Last edited by bmacd; 03-30-2009 at 08:40 PM. Reason: a little trigger happy on the submit button |
![]() |
![]() |
![]() |
#5 |
It's a catastrophic success.
![]() Join Date: Jan 2003
Location: Oklahoma
Posts: 2,077
|
Re: NV4500 slave cylinder
They make an assortment of these these things, google "hydraulic throwout bearing". for your exact application.
http://www.mcleodind.com/application...OB_BoltOn.html http://www.jegs.com/p/Tilton/755538/10002/-1 |
![]() |
![]() |
![]() |
Bookmarks |
|
|