Pulled the 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*roofing458* · 04-05-2009, 07:39 PM

yanked out the 6 cyl yesterday 3921970 .. & .Tranny gm 3837334.I know there is some posts somewhere on the swaps & i posted a few .I going to put a 350 mexican american 1006636 crate motor in it .i just need some parts numbers for new motors mounts ?What would be the better trans The 3837334 or should i upgrade to a sm465 ?Also trans mount parts number ? What if any would the upgrade make on performance .Not looking to go fast i already have something that runs fast ...Chime in

*roofing458* · 04-05-2009, 07:42 PM

this is fastttttttt

**Captainfab** · 04-05-2009, 11:56 PM

Is that 6cyl a 292 or a 250? Do you want to use the newer style motor mounts as the ones that are on the 350 already? Or do you want to use the '66 vintage motor mounts? If it were me I'd go with a SM465.....I just like them a little better. There wouldn't be any performance gain from the swap.

Daniel 61 Apache · 04-06-2009, 06:33 AM

Whats with the Viper? Random pic of the day?!

*roofing458* · 04-06-2009, 08:38 AM

I owned this viper from 05-07 sold it to a stock market guru he went bust for now .He has burned the tires off it ,all the rims are curb rashed ,1/4 panel has been hit. He called Jan and said he needed to get rid of it. so I bought it back ,Its now sitting in the back of a customer’s body shop .Now the body shop owners trying to make a deal with me to buy it for the summer . If I can dump it I want upgrade to a 2003 the 03s have a nice convert top you don’t have to remove...creature comforts as you get older

*roofing458* · 04-06-2009, 08:42 AM

edited by mod

Fred T · 04-06-2009, 11:09 AM

I'm not familiar with the tranny number 3837334. Is that the SM420 4 speed? If it is, and it works good, I would use it. The SM420 shifts faster than the 465. Both are good and durable, more than strong enough for the pickup.

kizer · 04-07-2009, 12:36 PM

May I ask how you pulled the 6? I plan on pulling mine in a few weeks and would like to know how to do it safely.

*roofing458* · 04-07-2009, 07:15 PM

Always have a couple extra guys that own ya money around to crawl under & unbolt everything. Remove inside floor board trans cover trans .I bought one of them engine levelers for 30 bucks .it’s a lot safer & better than bolting a old chain to the engine .Get a hoist and ease it out. With the front end off its breeze.

kizer · 04-08-2009, 09:55 AM

Ok, sounds like its just one of those go for its.

I have a engine hoist, but I was like man how am I supposed to pick it.

Thanks for the info.

04-05-2009, 07:39 PM	#1
roofing458 Account Suspended Join Date: Dec 2008 Location: wooddale illinois 60191 Posts: 100	Pulled the 6 yanked out the 6 cyl yesterday 3921970 .. & .Tranny gm 3837334.I know there is some posts somewhere on the swaps & i posted a few .I going to put a 350 mexican american 1006636 crate motor in it .i just need some parts numbers for new motors mounts ?What would be the better trans The 3837334 or should i upgrade to a sm465 ?Also trans mount parts number ? What if any would the upgrade make on performance .Not looking to go fast i already have something that runs fast ...Chime in Attached Images

04-05-2009, 07:42 PM	#2
roofing458 Account Suspended Join Date: Dec 2008 Location: wooddale illinois 60191 Posts: 100	Re: Pulled the 6 this is fastttttttt Attached Images

04-05-2009, 11:56 PM	#3
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Pulled the 6 Is that 6cyl a 292 or a 250? Do you want to use the newer style motor mounts as the ones that are on the 350 already? Or do you want to use the '66 vintage motor mounts? If it were me I'd go with a SM465.....I just like them a little better. There wouldn't be any performance gain from the swap. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

04-06-2009, 06:33 AM	#4
Daniel 61 Apache Registered User Join Date: May 2007 Location: Oceanside, CA Posts: 168	Re: Pulled the 6 Whats with the Viper? Random pic of the day?! __________________ Project 61 build thread Some people spend an entire lifetime wondering if they've made a difference....The Marines don't have that problem. Sic vis pacem, para bellum. -- "If you want peace, prepare for war."

04-06-2009, 08:38 AM	#5
roofing458 Account Suspended Join Date: Dec 2008 Location: wooddale illinois 60191 Posts: 100	Re: Pulled the 6 I owned this viper from 05-07 sold it to a stock market guru he went bust for now .He has burned the tires off it ,all the rims are curb rashed ,1/4 panel has been hit. He called Jan and said he needed to get rid of it. so I bought it back ,Its now sitting in the back of a customer’s body shop .Now the body shop owners trying to make a deal with me to buy it for the summer . If I can dump it I want upgrade to a 2003 the 03s have a nice convert top you don’t have to remove...creature comforts as you get older

04-06-2009, 08:42 AM	#6
roofing458 Account Suspended Join Date: Dec 2008 Location: wooddale illinois 60191 Posts: 100	Re: Pulled the 6 edited by mod Last edited by Fred T; 04-06-2009 at 10:56 AM. Reason: wrong forum for wtb

04-06-2009, 11:09 AM	#7
Fred T Cantankerous Geezer Join Date: Aug 2002 Location: Bel Aire, KS Posts: 6,264	Re: Pulled the 6 I'm not familiar with the tranny number 3837334. Is that the SM420 4 speed? If it is, and it works good, I would use it. The SM420 shifts faster than the 465. Both are good and durable, more than strong enough for the pickup. __________________ Fred There is no such thing as too much cam...just not enough engine.

04-07-2009, 12:36 PM	#8
kizer Its Deja Vu time again Join Date: Aug 2008 Location: Marysville, North of Seattle WA Posts: 815	Re: Pulled the 6 May I ask how you pulled the 6? I plan on pulling mine in a few weeks and would like to know how to do it safely. __________________ Its not pretty but its mine to figure out. The build / The Photos / Build Diary

04-07-2009, 07:15 PM	#9
roofing458 Account Suspended Join Date: Dec 2008 Location: wooddale illinois 60191 Posts: 100	Re: Pulled the 6 Always have a couple extra guys that own ya money around to crawl under & unbolt everything. Remove inside floor board trans cover trans .I bought one of them engine levelers for 30 bucks .it’s a lot safer & better than bolting a old chain to the engine .Get a hoist and ease it out. With the front end off its breeze.

04-08-2009, 09:55 AM	#10
kizer Its Deja Vu time again Join Date: Aug 2008 Location: Marysville, North of Seattle WA Posts: 815	Re: Pulled the 6 Ok, sounds like its just one of those go for its. I have a engine hoist, but I was like man how am I supposed to pick it. Thanks for the info. __________________ Its not pretty but its mine to figure out. The build / The Photos / Build Diary



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.